Mechanical engineering topic list of research papers
-
Impact of Machine Reliability Data Uncertainty on the Design and Operation of Manufacturing Systems
Abstract Decision making in the design and operation of advanced multi-stage manufacturing systems is more and more supported by digital manufacturing tools. In order to be effective in their scope, such tools have to be based on high-fidelity...
2013 / M. Colledani, A. Yemane -
A comparative evaluation of fluidized bed assisted drag finishing and centrifugal disk dry finishing
Abstract Drag finishing of brass (Cu-30 wt.% Zn) rings using fluidized abrasives, which is a new finishing technology, is comparatively evaluated with centrifugal disk finishing. The comparison was performed by selecting the same abrasive granulates ...
2014 / M. Barletta, A. Gisario, S. Venettacci, G. Rubino -
A Novel Teaching System for Industrial Robots2014 / Hsien-I Lin, Yu-Hsiang Lin
-
Evaluation of Artificial Neural Network-Based Temperature Control for Optimum Operation of Building Envelopes2014 / Jin Moon, Ji-Hyun Lee, Sooyoung Kim
-
Experimental Validation of a Computational Fluid Dynamics Methodology for Transitional Flow Heat Transfer Characteristics of a Steady Impinging Jet2014 / Sajad Alimohammadi, Darina B. Murray, Tim Persoons
-
Analysis of Cutting Stability in Vibration Assisted Machining Using Ananalytical Predictive Force Model
Abstract Vibration assisted machining (VAM)adds sinusoidal tool vibration to the conventional machining (CM) process. It is generally recognized that VAM can effectively improve machining quality and machining efficiency, however, the...
2015 / Yuan Gao, Ronglei Sun, Jürgen Leopold -
Modeling of the Electrical and Thermal Behaviors of an Ultracapacitor2014 / Jeongbin Lee, Jaeshin Yi, Daeyong Kim, Chee Shin, Kyung-Seok Min, et al.
-
Control Framework for Dexterous Manipulation Using Dynamic Visual Servoing and Tactile Sensors’ Feedback2014 / Carlos Jara, Jorge Pomares, Francisco Candelas, Fernando Torres
-
Development of Metal Plate with Internal Structure Utilizing the Metal Injection Molding (MIM) Process2013 / Kwangho Shin, Youngmoo Heo, Hyungpil Park, Sungho Chang, Byungohk Rhee
-
Experimental investigations on a CRDI system assisted diesel engine fuelled with aluminium oxide nanoparticles blended biodiesel
Abstract Experiments were conducted to determine engine performance, exhaust emissions and combustion characteristics of a single cylinder, common rail direct injection (CRDI) system assisted diesel engine using diesel with 25 percentage of zizipus...
2015 / C. Syed Aalam, C.G. Saravanan, M. Kannan -
Application of homotopy perturbation method for a conductive–radiative fin with temperature dependent thermal conductivity and surface emissivity
Abstract This work aimed at studying the effects of environmental temperature and surface emissivity parameter on the temperature distribution, efficiency and heat transfer rate of a conductive–radiative fin. The Homotopy Perturbation Method (HPM)...
2015 / Pranab Kanti Roy, Apurba Das, Hiranmoy Mondal, Ashis Mallick -
Time domain simulations of nonlinear thermoacoustic behaviour in a simple combustor using a wave-based approach
Abstract Lean premixed combustion chambers are susceptible to combustion instabilities arising from the coupling between the heat release rate perturbations and the acoustic disturbances. These instabilities are not desirable and knowledge of this...
2015 / Jingxuan Li, Aimee S. Morgans -
Capturing Experimental Design Insights in Support of the Model-based System Engineering Approach
Abstract Model-Based Systems Engineering (MBSE) continues to mature into a popular approach as systems become more complex. Integrating MBSE architectural diagrams with external simulations that model a variety of different domains allows designers...
2015 / Alex MacCalman, Hyangshim Kwak, Mary McDonald, Stephen Upton -
Design and analysis of a cogeneration plant using heat recovery of a cement factory
Abstract There is a more potential in a cement factory for electric power generation using waste heat recovery compared to the other industries. A case study has been done at a cement factory having two units, 1600TPD and 5500TPD, identified three...
2014 / G.V. Pradeep Varma, T. Srinivas -
Strategy of the Combustion Process Diagnosis in Direct Injection Engines
Abstract The proper strategy of internal combustion engine operation is one of the basic aims being taken into account in a design process, in a phase of building the first design of a specified engine, verification of geometrical and operational...
2014 / Jerzy Merkisz, Marek Waligórski -
Analysis of Heat Transfer and Fluid Flow in Different Shaped Roughness Elements on the Absorber Plate Solar Air Heater Duct
Abstract An artificial roughness on the heat transfer surface in the form of projections mainly creates turbulence near the wall or breaks the laminar sub-layer and thus enhances the heat transfer coefficient. In the present work the performance of...
2014 / Anil Kumar -
Variation Analysis in Collaborative Engineering; an Industrial Case Study of Rocket Motor Development
Abstract Considerably less research is found on tolerance specifications compared to research on tolerance analysis and synthesis. Where tolerance analysis and synthesis often can be completely understood based on technical input we argue that an...
2014 / Lars Krogstie, Andreas Gaarder, Bjørn Andersen -
Unsteady flow around a two-dimensional section of a vertical axis turbine for tidal stream energy conversion2015 / Hyun Ju Jung, Ju Hyun Lee, Shin Hyung Rliee, Museok Song, Beom-Soo Hyun
-
Numerical analysis on springing and whipping using fully-coupled FSI models
Abstract This paper focuses on ship springing and whipping analysis using a three-dimensional (3-D) Rankine panel method combined with a beam-element-based 1-D structural model and a shell-element-based 3-D structural model. In addition, slamming...
2014 / Jung-Hyun Kim, Yonghwan Kim -
A study of the kinematic characteristic of a coupling device between the buffer system and the flexible pipe of a deep-seabed mining system2015 / Jae-Won Oh, Chang-Ho Lee, Sup Hong, Dae-Sung Bae, Hui-Je Cho, et al.