Mechanical engineering topic list of research papers
-
Modeling of Axially Loaded Nanowires Embedded in Elastic Substrate Media with Inclusion of Nonlocal and Surface Effects2013 / Suchart Limkatanyu, Nattapong Damrongwiriyanupap, Woraphot Prachasaree, Worathep Sae-Long
-
A Novel Fractional Order Model for the Dynamic Hysteresis of Piezoelectrically Actuated Fast Tool Servo2012 / Zhiwei Zhu, Xiaoqin Zhou
-
Experiments on the Use of Signal Visualization Technique for In-Service Stall Detection in Industrial Fans2013 / Stefano Bianchi, Alessandro Corsini, Anthony G. Sheard
-
A Fast and High-Accuracy Compass Alignment Method to SINS with Azimuth Axis Rotation2013 / Xixiang Liu, Xiaosu Xu, Yiting Liu, Lihui Wang
-
Study on the Combustion Process and Emissions of a Turbocharged Diesel Engine with EGR2012 / Mei Deqing, Qian Junnan, Sun Ping, Miao Yan, Zhang Shuang, et al.
-
Genetic Algorithm for Job Scheduling with Maintenance Consideration in Semiconductor Manufacturing Process2012 / Seungchul Lee, Jun Ni
-
Gas Turbine Blade Damper Optimization Methodology2012 / R. K. Giridhar, P. V. Ramaiah, G. Krishnaiah, S. G. Barad
-
Effects of Convective Heating on Entropy Generation Rate in a Channel with Permeable Walls2013 / Oluwole Makinde, Adetayo Eegunjobi
-
Numerical simulation and experimental research of a flexible caudal fin by piezoelectric fiber composite2015 / Y.-L. Guan, H.-F. Li, X.-X. Yang, H.-M. Peng
-
Three-dimensional pose estimation model for object with complex surface2015 / R. Li, Y. Chen, C. Zhou, L. Zhang
-
Analysis of Range Extender Electric Vehicle Performance Using Vehicle Simulator
Abstract Range Extender Electric Vehicle (REEV) is a complicated multi-domain engineering system. The road ability on a range extender electric vehicle (REEV) is depending on the balance of subsystems. The important drive components, especially...
2015 / Bambang Wahono, Widodo Budi Santoso, Arifin Nur, Amin -
Performance and emission characteristics of the thermal barrier coated SI engine by adding argon inert gas to intake mixture
Abstract Dilution of the intake air of the SI engine with the inert gases is one of the emission control techniques like exhaust gas recirculation, water injection into combustion chamber and cyclic variability, without scarifying power output...
2014 / T. Karthikeya Sharma -
Probabilistic Fatigue Assessment Based on Bayesian Learning for Wind-Excited Long-Span Bridges Installed with WASHMS2013 / Zhi-Wei Chen, Xiao-Ming Wang
-
An Enhanced Tracking Algorithm for Distributed Encoding Fiber Bragg Grating Sensor Network2014 / Fan Zhang, Zude Zhou, Wenjun Xu
-
Numerical simulation of a backward-facing step flow in a microchannel with external electric field2015 / Q.-H. Yao, Q.-Y. Zhu
-
Application of Self Tuning Fuzzy Logic Control to Full Railway Vehicle Model
Abstract This paper presents the dynamic modeling and intelligent control of the full railway vehicle against the railway irregularities. In order to safe and comfortable transportation of passengers, vibration analysis and control studies are...
2011 / Semih Sezer, Saban Cetin, A. Erdem Atalay -
Integration of a 5-axis Spline Interpolation Controller in an Open CNC System
Abstract A 5-axis controller with curve interpolation function is developed to satisfy high-speed and high-precision computer numerical control (CNC) machining of machine parts with complex shapes in the authors-devised open CNC system. The...
2009 / Yongzhang Wang, Yuan Liu, Zhenyu Han, Zhongxi Shao -
Computational investigation of film cooling from cylindrical and row trenched cooling holes near the combustor endwall
Abstract This study was performed to investigate the effects of cylindrical and row trenched cooling holes with alignment angles of 0° and 90° at blowing ratio of 3.18 on the film cooling performance adjacent to the endwall surface of a combustor...
2014 / Ehsan Kianpour, Nor Azwadi Che Sidik -
Effect of Turning Angle on Flow Field Performance of Linear Bowed Stator in Compressor at Low Mach Number
Abstract A comparison of the results of a computational simulation and an experimental measurement indicates a good agreement between them: the bowed blade lowers the energy loss coefficient of engine by 11% in the simulation and by 13% in the...
2011 / Yong-jun ZHANG, Fu CHEN, Guo-tai FENG, Jie-xian SU -
A high efficiency 10 kWe microcogenerator based on an Atkinson cycle internal combustion engine
Abstract The paper focuses on the design and the overall performance of a 10 kW electric power microcogeneration plant suitable for local energy production, based on an Atkinson-cycle internal combustion engine prototype and entirely set by Istituto ...
2014 / Pietro Capaldi