Mechanical engineering topic list of research papers
-
Finite Element Study of the Effect of Structural Modifications on Structure-borne Vehicle Interior Noise2009 / V.B. Georgiev, V.V. Krylov
-
Dynamic strain measurement of hydraulic system pipeline using fibre Bragg grating sensors2016 / Q. Wang, J. Huang, Q. Liu, Z. Zhou
-
CFD Simulation and Optimization for Lateral Diversion and Intake Pumping Stations
Abstract The flow analysis of the lateral diversion and intake pumping stations is based on realizable k-ɛ turbulent model and SIMPLEC algorithm. The numerical simulation result coinciding to theoretical analysis result shows that the inlet flow of...
2012 / Bin Cheng, Yonghai Yu -
Auto-normalization algorithm for robotic precision drilling system in aircraft component assembly
Abstract A novel approach is proposed to detect the normal vector to product surface in real time for the robotic precision drilling system in aircraft component assembly, and the auto-normalization algorithm is presented based on the detection...
2013 / Wei Tian, Weixue Zhou, Wei Zhou, Wenhe Liao, Yuanfan Zeng -
A multi-objective train-scheduling optimization model considering locomotive assignment and segment emission constraints for energy saving2013 / Hui Hu, Keping Li, Xiaoming Xu
-
Natural Frequencies Analysis of Moderately-Thick and Thick Toroidal Shells
Abstract Toroidal shells have traditionally found application in the pressure vessel and piping industry. Early theoretical work on these shells focused on their static properties, but with their consideration for newer applications more emphasis...
2011 / X.H. Wang, D. Redekop -
Mechanism Design of a Facial Robot
Abstract Mechanical design of a humanoid robot head had always been the focus and difficulty. In this paper, structural design of a humanoid robot head based on Pro/E was introduced. And the virtual assembly in accordance with the life-size and the...
2011 / Hao Guan, Xu Dong Yan, Jian Lan -
Crack Detection of Thin Plate Structures Utilizing Measured Vibration
Abstract This paper reports the development of a crack detection method to identify cracks on thin plate sstructures using measured vibration responses on only a few points of the target structure. One of the most difficult problems for model-based...
2011 / H.F. Lam, Q. Hu, J.H. Yang -
Simulation of Ice Accretion Based on Roughness Distribution
Abstract Predicted model of roughness was built based on three different forms of liquid water on icing surface observed in experiments. Some issues regards to the icing mechanism and mass and heat transfer in roughness conditions were addressed....
2011 / Li Yan, Wang Chao, Chang Shi-nan, Chen Du -
Research and Practice of Course Design on Microcomputer Principle and Interface Technology
Abstract It is urgent to strengthen student's ability of practice and innovation according to demand for talent and development of computer education. Course design on microcomputer principle and interface technology can reinforce student...
2011 / Yanping Zhou -
Several Thoughts on Conduct of Critical Process Quality Surveillance
Abstract Based on the three aspects to which the Aviation Industry Corporation of China need to pay close attention to the conduct of the critical process quality surveillance, the article defines the critical aspects and specific requirements for...
2011 / Liu Jie, Guan Li, Zhang Xuanzhou -
Numerical Investigation of Shell-Side Characteristics of H-Shape Baffle Heat Exchanger
Abstract A new shell-and-tube heat exchanger with the H-shape baffle support structure in shell-side is presented. Analysis of fluid flow and heat transfer characteristics were carried out with the segmental baffle, rod baffle and H-shape baffle...
2011 / Wang Yongqing, Gu Xin, Wang Ke, Dong Qiwu -
Attitude Determination Using a MEMS-Based Flight Information Measurement Unit2011 / Der-Ming Ma, Jaw-Kuen Shiau, I.-Chiang Wang, Yu-Heng Lin
-
The research of Kronecker product-based measurement matrix of compressive sensing2013 / Baoju Zhang, Xiang Tong, Wei Wang, Jiazu Xie
-
Thermal Design of Ammonia Desuperheater-Condenser and Comparative Study with HTRI
Abstract Condensers are widely used in chemical industry, refrigeration, air-conditioning and power generation systems. In this paper, the thermal design of a desuperheater-condenser has been carried out manually as well as using HTRI software. The...
2013 / Shreya Sahajpal, Parin D. Shah -
The Effect of Thermal Radiation on Entropy Generation Due to Micro-Polar Fluid Flow Along a Wavy Surface2011 / Cha’o-Kuang Chen, Yue-Tzu Yang, Kuei-Hao Chang
-
A new power series solution on the electrostatic pull-in instability of nano cantilever actuators
Abstract In this paper, a power series solution is used to study the deflection and pull-in instability of nano cantilever electromechanical switches using a distributed parameter model. In the modeling of intermolecular force the Casimir force and...
2011 / Mohammad Ghalambaz, Aminreza Noghrehabadi, Mohamadreza Abadyan, Yaghoub Tadi Beni, Ali Reza Noghreh Abadi, et al. -
A Multi-Fork Z-Axis Quartz Micromachined Gyroscope2013 / Lihui Feng, Ke Zhao, Yunan Sun, Jianmin Cui, Fang Cui, et al.
-
Joint Implementation of Signal Control and Congestion Pricing in Transportation Network2013 / Wei Mao, Feifei Qin, Yihong Hu, Zhijia Tan
-
Point mobility of a cylindrical plate incorporating a tapered hole of power-law profile2011 / Daniel J. O’Boy, Elizabeth P. Bowyer, Victor V. Krylov