Mechanical engineering topic list of research papers
-
On the Modelling of Explosion Deflagrating Flames
Abstract This paper presents results from numerical calculations using the large eddy simulation (LES) technique of deflagrating flames inside a laboratory scale explosion chamber. The LES technique has been proved to be an extremely powerful and...
2012 / Yinqing Wang, Salah S Ibrahim, Weertunge Malalasekera -
Development of Approach to Automatic Machining of Composite Parts without their Rigid Fixing by Means of Multilink Manipulators
Abstract This paper presents the new advanced approach for automatization of machining of nonrigid composites parts that have arbitrary geometrical form. This approach is based on using multilink manipulators with stereo vision system and allows not ...
2014 / Vladimir Filaretov, Alexander Zuev, Anatoly Khvalchev -
Education Software for the Modelling and Calibration of Kinematic Mechanisms
Abstract This paper presents a new software for teaching the most important aspects of modelling, characterization and calibration of parallel mechanisms by means of the kinematic model, the kinematic parameter identification and the control of the...
2013 / A.C. Majarena, J. Santolaria, D. Samper, J.J. Aguilar -
Simulation of Speed Steam Turbine Control System
Abstract Steam turbine control systems are being designed with today's technology to operate a turbine in a safe and reliable manner. There are many considerations to be taken when choosing a controller for steam turbine applications. Many benefits...
2014 / Mircea Dulau, Dorin Bica -
Evaluation Model of Design for Operation and Architecture of Hierarchical Virtual Simulation for Flight Vehicle Design
Abstract In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design, a tri-hierarchical task classification model of “design for operation” is proposed, which takes basic...
2012 / Hu LIU, Yongliang TIAN, Chaoying ZHANG, Jiao YIN, Yijie SUN -
Numerical study of effusion cooling on an adiabatic flat plate
Abstract The present study aims to investigate the effectiveness of effusion film cooling on an adiabatic flat plate. Cylindrical holes of 30° inclination are used for supplying cold air to the hot primary flow. A non-dimensional parameter called...
2013 / Reaz Hasan, Agin Puthukkudi -
A New Design Concept for 2-Stroke Aircraft Diesel Engines
Abstract High power density, low weight, compact dimensions, high efficiency as well as reliability are the key factors in designing and dimensioning piston engines for General Aviation and Unmanned Aerial Vehicle (UAV) power plants. Despite of new...
2014 / Giuseppe Cantore, Enrico Mattarelli, Carlo Alberto Rinaldini -
The Numerical Analysis of Engineering Vehicle Power Compartment Air Flow
Abstract The engineering vehicle radiator module is an important part of the cooling system. The heat transfer performance of a radiator module has a direct impact on the state of cooling system thermal equilibrium. Therefore, it is essential for...
2013 / Fei Wang, YaXu Chu, LiLi Wang, Hao Wang -
Assessment of the grinding wheel active surface condition using SEM and image analysis techniques2013 / Wojciech Kapłonek, Krzysztof Nadolny
-
Incident Detection Methods Using Probe Vehicles with On-board GPS Equipment
Abstract Mobile communication instruments have made detecting traffic incidents possible by using floating traffic data. This paper studies the properties of traffic flow dynamics during incidents and proposes incident detection methods using...
2015 / Yasuo Asakura, Takahiko Kusakabe, Nguyen Xuan Long, Takamasa Ushiki -
Numerical Study on Heat Transfer Deterioration of Supercritical n-Decane in Horizontal Circular Tubes2014 / Yanhong Wang, Sufen Li, Ming Dong
-
Enhancement of the Excitation Efficiency of the Non-Contact Magnetostrictive Sensor for Pipe Inspection by Adjusting the Alternating Magnetic Field Axial Length2014 / Pengfei Sun, Xinjun Wu, Jiang Xu, Jian Li
-
Three-Dimensional CFD Modeling of Transport Phenomena in a Cross-Flow Anode-Supported Planar SOFC2013 / Zhonggang Zhang, Jingfeng Chen, Danting Yue, Guogang Yang, Shuang Ye, et al.
-
A non-perturbative approach to spatial instability of weakly non-parallel shear flows2015 / Zhangfeng Huang, Xuesong Wu
-
Dynamic and Static Analysis of the Key Vertical Parts of a Large Scale Ultra-precision Optical Aspherical Machine Tool
Abstract In this paper, a finite element model is built up to investigate the static and dynamic characteristics of the key vertical parts of a large scale ultra-precision optical aspherical machine. The spring-damper units of moving joint surfaces...
2015 / Lin Sun, Shuming Yang, Pu Zhao, Pengfei Wu, Xingyuan Long, et al. -
What does the future bring? A look at technologies for commercial aircraft in the years 2035–2050
Abstract Demographics and economics in the next 20 years are being examined. They reflect a significant GDP growth and with this a strong demand for commercial aircraft not only in the US and Europe but across Asia and the Middle East. The demand...
2015 / Meyer J. Benzakein -
A novel internal combustion engine utilizing internal hydrogen production for improved efficiency – A theoretical concept
Abstract Starting from the baseline of a Diesel engine, we show that with a suitable in-cylinder catalyst and well controlled injection of fuel and steam mixture during a certain period in the compression stage, a significant increase in the ideal...
2014 / I. Sher, E. Sher -
Error analysis on assembly and alignment of laser optical unit2015 / Z. Xiong, H. Wang, T. Cao, X. Yuan, C. Yao, et al.
-
Broken wires diagnosis method numerical simulation based on smart cable structure2014 / Sheng Li, Min Zhou, Yan Yang
-
Pre-startup Proofs in an Absorption Heat Transformer for Water Purification with Compact Components
Abstract An absorption heat transformer is a type of heat pump which recovers waste heat from an industrial source or a solar collector and increases its thermal level to be used in a specific application. In recent years, these transformers have...
2014 / L.I. Morales, D. Juárez-Romero, J. Siqueiros, J. Torres-Merino