Mechanical engineering topic list of research papers
-
Dynamic Analysis of a Pyroprocessing Coupled SFR Fuel Recycling2012 / Fanxing Gao, Won Il Ko
-
Ginkgo biloba Extract in Alzheimer’s Disease: From Action Mechanisms to Medical Practice2010 / Chun Shi, Jun Liu, Fengming Wu, David T. Yew
-
Experimental design and investigation of a pin-type reconfigurable clamping system for manufacturing aerospace components2004 / A Al-Habaibeh, N Gindy, R M Parkin
-
High speed trot-running: Implementation of a hierarchical controller using proprioceptive impedance control on the MIT Cheetah2014 / D. J. Hyun, S. Seok, J. Lee, S. Kim
-
Review on Mathematical and Mechanical Models of the Vocal Cord2012 / L. Cveticanin
-
A Smartphone-Based Driver Safety Monitoring System Using Data Fusion2012 / Boon-Giin Lee, Wan-Young Chung
-
Precise 3D Lug Pose Detection Sensor for Automatic Robot Welding Using a Structured-Light Vision System2009 / Jae Byung Park, Seung Hun Lee, Il Jae Lee
-
Comparison of Presumed PDF Models of Turbulent Flames2012 / Chen Huang, Andrei N. Lipatnikov
-
In Situ Investigation of the Silicon Carbide Particles Sintering2010 / Yu Niu, Feng Xu, Xiaofang Hu, Jianhua Zhao, Hong Miao, et al.
-
Optimization of gas turbines for sustainable turbojet propulsion
Abstract Gas-turbines are widely used to power aero planes because they are light, compact with a high power-to-weight ratio. In the turbo jet engine, the main operating variables are: compressor pressure ratio r ...
2015 / Yousef S.H. Najjar, Ibrahim A.I. Balawneh -
Numerical simulation of armored vehicles subjected to undercarriage landmine blasts2015 / A. Erdik, S. A. Kilic, N. Kilic, S. Bedir
-
Movement characteristic of a circuit breaker with repulsion force compensated contact system2015 / C. Niu, J. Ding, F. Yang, J. Man, R. Ma
-
Non-contact Type On-machine Measurement System for Turbine Blade
Abstract In turbine blade machining from a near net shape (e.g., forged workpiece), it is difficult to use a touch trigger probe for measuring the mounting angle of the workpiece due to its uncertain free-form surface. Therefore, non-contact...
2014 / S. Nishikawa, K. Ohno, M. Mori, M. Fujishima -
Free surface simulation of a two-layer fluid by boundary element method2015 / Weoncheol Koo
-
Nonlinear Dynamics Behaviors of a Rotor Roller Bearing System with Radial Clearances and Waviness Considered
Abstract A rotor system supported by roller bearings displays very complicated nonlinear behaviors due to nonlinear Hertzian contact forces, radial clearances and bearing waviness. This paper presents nonlinear bearing forces of a roller bearing...
2008 / Wang Liqin, Cui Li, Zheng Dezhi, Gu Le -
Transient Thermal Analysis of a Plate Fin Heat Sink with Green's Function
Abstract The accurate analyses for a plate fin heat sink with the ability to control the temperature of the avionics devices within a pre-set controllable temperature range are required both in the process of circuit design and for the real-time...
2011 / Xianghui SU, Feng XU -
Effect of Dressing on Internal Cylindrical Grinding
Abstract Performance of grinding operation is influenced by a variety of factors amongst which dressing process is the most important. Through the dressing process, the grinding wheel topography is produced. This affects, in turn, directly the...
2014 / A. Daneshi, N. Jandaghi, T. Tawakoli -
Development of the Design Guideline for Product-service Systems
Abstract Recently, product-service systems (PSSs) have begun attracting attention as income-generation options for manufacturers. While many researchers have developed design methods and evaluation tools for PSSs and have validated their...
2014 / Koji Kimita, Yoshiki Shimomura -
Influence of Motion Error of Translational and Rotary Axes onto Machined Surface Generated by Simultaneous Five-axis Motion
Abstract In the machining process the dynamic behaviors of machine tools, such as tool vibration, vibration of mechanical structure, and motion error of feed drive systems, influence the machined surface. However, the influence of dynamic ehaviors...
2014 / Ryuta Sato, Kentaro Nishio, Keiichi Shirase, Gianni Campatelli, Antonio Scippa -
Influence of Cutting Parameters on Cutting Force and Surface Finish in Turning Operation
Abstract This research reports the significance of influence of speed, feed and depth of cut on cutting force and surface roughness while working with tool made of ceramic with an Al2O3+TiC matrix (KY1615)and the work material of AISI 1050 steel...
2013 / C.J. Rao, D. Nageswara Rao, P. Srihari