Mechanical engineering topic list of research papers
-
Improvement of Adaptive Cruise Control Performance2010 / Shigeharu Miyata, Takashi Nakagami, Sei Kobayashi, Tomoji Izumi, Hisayoshi Naito, et al.
-
Study on Integrated Control of Vehicle Yaw and Rollover Stability Using Nonlinear Prediction Model2013 / Jianyong Cao, Lixin Jing, Konghui Guo, Fan Yu
-
EVALUATION OF A DYNAMIC SIGNAL OPTIMISATION CONTROL MODEL USING TRAFFIC SIMULATION
The objective of this paper is to demonstrate the feasibility of implementing a traffic signal optimisation model to improve real-time operations of traffic control systems. Advanced computer algorithms and traffic optimisation techniques can provide benefits over ...
2014 / Suphasawas NIGARNJANAGOOL, Hussein DIA -
An inverse approach for constructing the residual stress field induced by welding2002 / Y P Cao, N Hu, J Lu, H Fukunaga, Z H Yao
-
Regressing the Size and Cost of Turbulent Cavity Flow Simulations2011 / A. Rona, M. Monti
-
Integrated Measurement System of Performance Parameters of Piezoelectric Ceramic Material2015 / Q. Lu, Y. Ge, X. Chen
-
Development of a virtual manufacturing assembly simulation system2016 / A. M. Al-Ahmari, M. H. Abidi, A. Ahmad, S. Darmoul
-
Surface Roughness Model Based on Force Sensors for the Prediction of the Tool Wear2014 / Beatriz de Agustina, Eva Rubio, Miguel Sebastián
-
The Influence of the Heat Source Temperature on the Multivane Expander Output Power in an Organic Rankine Cycle (ORC) System2015 / Piotr Kolasiński
-
Active Speed Compensation Method of Direct Torque Control System and Stability Analysis2015 / R. Li, C.-n. Tong, X. Yang
-
Improved Process Control and Model of Axial Forces of One-way Abrasive Flow Machining
Abstract Abrasive flow machining (AFM) is an abrasive machining process used to machine internal geometries like bores in terms of deburring and finishing the surface with high performance. A silicate-based medium is forced through the internal...
2014 / Martin Swat, Horst Brünnet, Nataliya Lyubenova, Joachim Schmitt, Stefan Diebels, et al. -
Derivation of Measures for Energy Efficient Machine Design by Evaluating Energy Consumption Data
Abstract During a machine's design phase a lack of reliable specification data resulting from the use phase specific application leads to energy losses in various discrete manufacturing processes. The reason for instance could be inefficient design...
2014 / Johannes Böhner, Moritz Hamacher, Arnim Reger, Rolf Steinhilper -
Damage localization in shear buildings by direct updating of physical properties2015 / Alireza Entezami, Hashem Shariatmadar
-
Subject Index of Chinese Journal of Aeronautics (2015)2016 /
-
Analysis on Bus Choice Behavior of Car Owners based on Intent – Ji’nan as an Example
Abstract This paper establishes MNL and joint SP-RP MNL models to analyze the bus choice behavior of car owners based on disaggregate utility theory in middle-sized cities of China. The preference survey of travel behavior for car traveler groups is ...
2013 / Huanmei Qin, Hongzhi Guan, Zhihu Zhang, Liu Tong, Liyuan Gong, et al. -
Driving Behavior Theory and Computer Simulation System of Driver's Risk Perception based on 3D
Abstract Drivers take up the leading role in road traffic system, in all road traffic accidents, the ones initiated by driver factor account for over 90%.The main reason is that such drivers have not formed the “internal pattern” of correctly...
2013 / Zhao Jian-you, Shi Xiao-fen, Zhao Liang, Zhao Shuang-xi, Niu Xi-yang -
A Lane Change Model with the Consideration of Car Following Behavior
Abstract Lane change model is a hot issue of microscopic traffic simulation and active safety. Among current studies, most of lane change models based on vehicle kinematics hypothesize that when the vehicle of adjacent lane changes lane, the...
2013 / Wu Xiaorui, Yang Hongxu -
“Injection Pump for CCS”
Abstract In this paper, key point for design of CO2 injection pump is explained. Material selection guide line is explained firstly both for main parts and wearing parts. Consideration of corrosion and low viscosity is important. Next, pump...
2013 / Shigeru Yoshikawa -
Bio-Inspired Design: An Overview Investigating Open Questions From the Broader Field of Design-by-Analogy2014 / Katherine Fu, Diana Moreno, Maria Yang, Kristin L. Wood
-
The dilution effect on the extinction of wall diffusion flame2015 / Nadjib Ghiti