Mechanical engineering topic list of research papers
-
Parallel Implementation of Vortex Element Method on CPUs and GPUs
Abstract The implementations of 2D vortex element method adapted to different types of parallel computers are considered. The developed MPI-implementation provides close to linear acceleration for small number of computational cores and...
2015 / Kseniia Kuzmina, Ilia Marchevsky, Victoriya Moreva -
Exact geometry solid-shell element based on a sampling surfaces technique for 3D stress analysis of doubly-curved composite shells2015 / G. M. Kulikov, A. A. Mamontov, S. V. Plotnikova, S. A. Mamontov
-
A genetic algorithm-based optimizing approach for project time-cost trade-off with uncertain measure2014 / Hua Ke
-
A novel prosthetic knee joint with a parallel spring and damping mechanism2016 / Huiqun Fu, Xiufeng Zhang, Xitai Wang, Rong Yang, Jian Li, et al.
-
Stability Analysis of Time-averaged Jet Flows: Fundamentals and Application
Abstract We report on experimental and theoretical investigations of shear flow instabilities in jet flows. Linear stability analysis is applied to the time-averaged flow taken from experiments, contrasting the ‘classic’ stability approach that is...
2015 / Kilian Oberleithner, Christian Oliver Paschereit, Julio Soria -
Study on the Method for Collecting Vibration Signals from Mill Shell Based on Measuring the Fill Level of Ball Mill2014 / Peng Huang, Minping Jia, Binglin Zhong
-
Numerical modeling and preliminary validation of drag-based vertical axis wind turbine2015 / Tomasz Krysiński, Zbigniew Buliński, Andrzej J. Nowak
-
Side Information Generation Based on Hierarchical Motion Estimation in Distributed Video Coding
Abstract The side information quality has an immense effect on the compression efficiency of the distributed video coding (DVC) system. This article, based on the hierarchical motion estimation (HME), proposes a new side information generation...
2009 / Rongke Liu, Zhi Yue, Changwen Chen -
Progress in the Prediction of Entropy Generation in Turbulent Reacting Flows Using Large Eddy Simulation2014 / Mehdi Safari, Fatemeh Hadi, M. Sheikhi
-
Flow Simulations Using Two Dimensional Thermal Lattice Boltzmann Method2012 / Saeed J. Almalowi, Alparslan Oztekin
-
Scanning Speed Effect on Mechanical Properties of Ti-6Al-4V Alloy Processed by Electron Beam Additive Manufacturing
Abstract In this study, mechanical properties in Ti-6Al-4V samples built with the powder-bed electron beam additive manufacturing (EBAM) process over a range of beam scanning speeds were experimentally investigated. Four levels of speed functions...
2015 / Xiaoqing Wang, Xibing Gong, Kevin Chou -
Applications of Frequency Conversion Technology in Air-compressor Units Control System
Abstract Reconstruction of control system has been conducted through adoption of frequency conversion technology-three driven by one shared converter targeting control system shortcomings of piston air-compressor in a mine of Shandong. The necessity ...
2011 / Huibin Liang, Xuehua Li -
The New Structure Design and Analysis of Energy Storage of Flywheel of Split Rotor2015 / P. Xu, W. Wang, J. Yan, S. Han
-
Online Adaptive Bearings Condition Assessment Using Continuous Hidden Markov Models2015 / F. Cartella, H. Sahli
-
Experimental Study of Corner Stall in a Linear Compressor Cascade
Abstract In order to gain a better knowledge of the mechanisms and to calibrate computational fluid dynamics (CFD) tools including both Reynolds-averaged Navier-Stokes (RANS) and large eddy simulation (LES), a detailed and accurate experimental...
2011 / Wei MA, Xavier OTTAVY, Lipeng LU, Francis LEBOEUF, Feng GAO -
Exergy Assessment of Single Stage Solar Adsorption Refrigeration System Using ANN2012 / V. Baiju, C. Muraleedharan
-
A Novel Reconfigurable Assembly Jig Based on Stable Agile Joints and Adaptive Positioning-Clamping Bolts
Abstract This paper presents a novel reconfigurable assembly jig called Agile Joint Jig (AJJ) which consists of three main parts: framework, locators and auxiliary components. This framework is not a welded one, but is bolted together using three...
2016 / Hongbo Zhang, Lianyu Zheng, Xiwei Chen, Haiji Huang -
Development and verification of the TR-BN software for substantiation of normal operation modes of BN reactors
Abstract Substantiation of design parameters of sodium-cooled fast reactor facilities (BN RF) in normal operation modes represent an important task solution of which is necessary for determining safe and optimal reactor operation conditions....
2016 / I.D. Fadeev, I.V. Dmitrieva, S.L. Osipov, S.A. Rogozhkin, S.F. Shepelev -
Real-time model for simulating a tracked vehicle on deformable soils2016 / M. Meywerk, T. Fortmu ller, B. Fuhr, S. Bass
-
Thermal–hydraulic characteristics for CANFLEX fuel channel using burnable poison in CANDU reactor
Abstract The thermal–hydraulic characteristics for the CANadian Deuterium Uranium Flexible (CANFLEX)-burnable poison (BP) fuel channel, which is loaded with a BP at the center ring based on the CANFLEX-RU (recycled uranium) fuel channel, are...
2015 / Jun Ho Bae, Jong Yeob Jeong