Mechanical engineering topic list of research papers
-
Experimental study of turbulence intensity influence for turbulent cross flow in staggered tube bundle using grooved cylinder2016 / Ouissem Sahli, Lahouari Adjlout, Omar Ladjedel, Mohamed Amine Ghazi
-
Theoretical and experimental studies of the stress–strain state of expansion bellows as elastic shells
Abstract This paper studies the stress–strain state of an U-shaped expansion bellows under an internal-pressure induced load. The bellows is considered as a corrugated shell of revolution under axisymmetric load. The governing equations have been...
2017 / Aleksander K. Belyaev, Tatiana V. Zinovieva, Kirill K. Smirnov -
Analytical Calculation of Hydraulic Characteristics of Jet-cavitation Fluid Mass Flow Stabilizers
Abstract The paper provides analysis of devices using cavitation mass flow stabilization effect in the working process. The object of present study is the jet-cavitation fluid mass flow stabilizer of the “pipe-pipe” type. To create the method of its ...
2017 / Sergey Y. Konstantinov, Vladimir A. Tselischev, Dmitriy V. Tselischev -
Rapid prototyping methods for the manufacture of fuel cells2016 / Piotr Dudek, Andrzej Raźniak, Bartłomiej Lis
-
Optimal three-dimensional biped walking pattern generation based on geodesics2017 / Liandong Zhang, Changjiu Zhou
-
Deterministic learning enhanced neutral network control of unmanned helicopter2016 / Yiming Jiang, Chenguang Yang, Shi-lu Dai, Beibei Ren
-
Forward kinematics analysis for a class of asymmetrical parallel manipulators2017 / Qimin Xu, Yongsheng Yang, Zhongliang Jing, Shiqiang Hu
-
Multi-objective optimization of flexure hinge mechanism considering thermal–mechanical coupling deformation and natural frequency2017 / Lufan Zhang, Xueli Li, Jiwen Fang, Zhili Long
-
Structural Reliability Analysis Using Orthogonalizable Power Polynomial Basis Vector2017 / Yejun Li, Bin Huang
-
Smart Material-Actuated Flexible Tendon-Based Snake Robot2016 / Mohiuddin Ahmed, Md. Masum Billah
-
Simulation and Experimental Study in the Process of Wave Energy Conversion2016 / Wei Zhang, Yanjun Liu
-
Effect of temperature and pressure on stress of impeller in axial-centrifugal combined compressor2016 / Xinqian Zheng, Chuang Ding
-
A hybrid Force Position Control for a Upper Limb Rehabilitation Robot of Series Mechanism2016 / Yali Liu, Linhong Ji
-
Non-stationary CFD Simulation of a Gear Pump
Abstract The use of modern CAD and CFD techniques in the conception and simulation of industrial products has had huge applications in the mechanical, automotive and aerospace industries. This paper includes all the steps to follow, from the...
2017 / Martin Močilan, Štefan Husár, Ján Labaj, Milan Žmindák -
Optimal operation of high-speed train based on fuzzy model predictive control2017 / Xi Wang, Tao Tang
-
A New Model for the Mechanochemical Corrosion of a Thin Spherical Shell2016 / O. Sedova, Y. Pronina
-
Stiffness Model of a 3-DOF Parallel Manipulator with Two Additional Legs2014 / Guang Yu, Jun Wu, Liping Wang
-
Surface Quality Research for Selective Laser Melting of Ti-6Al-4V Alloy2016 / M. Król, T. Tański
-
Genetic Algorithm Combined with Gradient Information for Flexible Job-shop Scheduling Problem with Different Varieties and Small Batches2017 / Ming Chen, Jie-Lin Li
-
Behavior of the sandwich beam subjected to bending as a function of the core density2016 / Ružica R. Nikolić, Jelena M. Djoković, Jan Bujnak, Katarina Živković