Mechanical engineering topic list of research papers
-
Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools2016 / Md. Mizanur Rahman, J.R.R. Mayer
-
Vortex-induced vibration of a tube array with a large pitch-to-diameter ratio value2016 / Bin Jiang, Xu Zhang, Xiaoming Xiao, Luhong Zhang
-
Detection of Workpiece Shape Deviations for Tool Path Adaptation in Robotic Deburring Systems
Abstract Robotic systems have the potential to automate deburring processes along edges of arbitrarily shaped workpieces. The desired robot movement can be realized by proper trajectory planning using the computer-aided design (CAD) model of the...
2017 / Alexander Kuss, Manuel Drust, Alexander Verl -
Design of Radial Inflow Turbine for 30 kW Microturbine2017 / Thanate Sangsawangmatum, Udomkiat Nontakaew
-
Fully Enclosed Multi-Axis Inertial Reaction Mechanisms for Wave Energy Conversion
Abstract This paper introduces a novel concept for wave energy conversion, using fully enclosed appropriate internal body configurations, which provide inertial reaction against the motion of an external vessel. In this way, reliability, robustness...
2017 / I.A. Antoniadis, V. Georgoutsos, A. Paradeisiotis -
Structural Analysis of Basalt Fiber Reinforced Plastic Wind Turbine Blade2014 / Ali Nawaz Mengal, Saravanan Karuppanan, Azmi Abdul Wahab
-
An investigation of force components in orthogonal cutting of medical grade cobalt–chromium alloy (ASTM F1537)2017 / Szymon Baron, Eamonn Ahearne
-
Addressable multi-nozzle electrohydrodynamic jet printing with high consistency by multi-level voltage method2015 / Yanqiao Pan, YongAn Huang, Lei Guo, Yajiang Ding, Zhouping Yin
-
Dynamic response analysis under atmospheric disturbances for helicopters based on elastic blades
Abstract A flight dynamics model based on elastic blades for helicopters is developed. Modal shape analysis is used to describe the rotating elastic blades for the purpose of reducing the elastic degrees of freedom for blades. The analytical result...
2017 / Liu Tong, Dai Yuting, Hong Guanxin, Wang Linpeng -
Gasification Processes Old and New: A Basic Review of the Major Technologies2010 / Ronald W. Breault
-
Specifications and applications of the technical code for monitoring of building and bridge structures in China2017 / Y Yang, QS Li, BW Yan
-
Plasma Arc Cutting Dimensional Accuracy Optimization employing the Parameter Design approach2017 / John Kechagias, Markos Petousis, Nectarios Vidakis, Nikos Mastorakis
-
Experimental and Numerical Investigation of Flow Structures around Cylindrical Bluff Bodies2015 / Sercan Yagmur, Sercan Dogan, Muharrem H. Aksoy, Eyub Canli, Muammer Ozgoren
-
Surface polish of PLA parts in FDM using dichloromethane vapour2017 / Yifan Jin, Yi Wan, Zhanqiang Liu
-
Importance of the surface treatment in the peeling strength of joints for the shoes industry2013 / R MM Paiva, E AS Marques, L FM da Silva, M AP Vaz
-
Mixed convective heat transfer to Sisko fluid over a radially stretching sheet in the presence of convective boundary conditions2015 / Masood Khan, Rabia Malik, Asif Munir
-
Heat Flux Identification at the Charge Surface During Heating in Chamber Furnace2017 / A. Gołdasz, Z. Malinowski
-
Numerical simulation of heat transfer to separation tio2/water nanofluids flow in an asymmetric abrupt expansion2015 / Cheen Sean Oon, Sin Nee Yew, Bee Teng Chew, Kazi Md Salim Newaz, Ahmed Al-Shamma'a, et al.
-
Study on Surface Integrity of AISI 1045 Carbon Steel when machined by Carbide Cutting Tool under wet conditions2017 / N. Fauzi Tamin, U.A.A. Azlan, M. Hadzley, N.S. Remle, M. Hairizal Osman, et al.
-
The investigation of gas-liquid two-phase transient flow based on Steger-Warming flux vector splitting method in pipelines2016 / J. Jiang, Y. Fu, L. Zhang, Y. Li, W. Ji, et al.