Mechanical engineering topic list of research papers
-
Entropy Generation in Laminar Fluid Flow through a Circular Pipe2008 / Ahmet Z. Sahin, Rached Ben-Mansour
-
Modelling tidal stream turbines in a three-dimensional wave-current fully coupled oceanographic model
Abstract A tidal turbine simulation system is developed based on a three-dimensional oceanographic numerical model. Both the current and turbulent controlling equations are modified to account for impact of tidal turbines on water velocity and...
2017 / Xiaorong Li, Ming Li, Stuart McLelland, Laura-Beth Jordan, Laurent Amoudry, et al. -
An Experimental Investigation of Cutting Temperature and Tool Wear in 2 Dimensional Ultrasonic Vibrations Assisted Micro-Milling2017 / Mohd Rasidi Ibrahim, Zulafif Rahim, Erween Rahim, Latif Tobi, Kai Cheng, et al.
-
Influence of frictional mechanism on chatter vibrations in the cutting process–analytical approach2016 / Andrzej Weremczuk, Rafal Rusinek
-
Numerical Solution for a FG Cylinder Problem Using Finite-Difference Method2011 / Daoud S. Mashat
-
Lattice Boltzmann Method for Two-Dimensional Unsteady Incompressible Flow2016 / Juraj Mužík
-
Model Order Reduction of Large-Scale Finite Element Systems in an MPI Parallelized Environment for Usage in Multibody Simulation2016 / Thomas Volzer, Peter Eberhard
-
New Approach to Simulation of Heat State of Compartments from Lattice Composite Shells for Space Engineering Products2016 / Alexander F. Razin, Mikhail N. Slitkov, Anatoly N. Garashchenko
-
Development of a bi-directional electrohydrodynamic pump: Parametric study with numerical simulation and flow visualization2016 / Dong Sik Cho, Sangmo Kang, Yong Kweon Suh
-
Recent advances in ultrasonic-assisted machining for the fabrication of micro/nano-textured surfaces2017 / Shaolin Xu, Tsunemoto Kuriyagawa, Keita Shimada, Masayoshi Mizutani
-
Effects of van der Waals Force and Thermal Stresses on Pull-in Instability of Clamped Rectangular Microplates2008 / Romesh C. Batra, Maurizio Porfiri, Davide Spinello
-
The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction
Abstract Despite extensive research into alternative methods, the internal combustion engine is expected to remain as the primary source of vehicular propulsion for the foreseeable future. There are still significant opportunities for improving fuel ...
2017 / R. Rahmani, H. Rahnejat, B. Fitzsimons, D. Dowson -
The effect of porosity on performance of phosphoric acid doped polybenzimidazole polymer electrolyte membrane fuel cell2016 / Muhammet Celik, Gamze Genc, Gulsah Elden, Huseyin Yapici
-
Creative Interdisciplinary Math Lessons by Means of Music Activities2016 / Jana Hudáková, Eva Králová
-
Optimization of the heat output of wall convectors with using an unconventional slumped glass cover2016 / Petr Kulhavy, Jitka Kleckova, Michal Petru, Miroslav Havlicek
-
Introducing a novel Mesh Following Technique for approximation-free robotic tool path trajectories
Abstract Modern tools for designing and manufacturing of large components with complex geometries allow more flexible production with reduced cycle times. This is achieved through a combination of traditional subtractive approaches and new additive...
2017 / Carmelo Mineo, Stephen Gareth Pierce, Pascual Ian Nicholson, Ian Cooper -
Optimization of energy saving device combined with a propeller using real-coded genetic algorithm2015 / Tomohiro Ryu, Takashi Kanemaru, Shiro Kataoka, Kiyoshi Arihama, Akira Yoshitake, et al.
-
Comparative tests of the proper active grinding powers and maximum grinding temperatures, conducted on corrosion-resistant steel surfaces, using aluminium oxynitride and noble electrocorundum grinding wheels2016 / Czesław Niżankowski, Grzegorz Struzikiewicz
-
Peridynamic Solutions for Timoshenko Beams2014 / E. Thomas Moyer, Michael J. Miraglia
-
Flow of Sisko fluid over a stretching cylinder and heat transfer with viscous dissipation and variable thermal conductivity: A numerical study2016 / M. Y. Malik, Arif Hussain, T. Salahuddin, M. Awais, S. Bilal, et al.