Mechanical engineering topic list of research papers
-
Integration of heat pumps into thermal plants for creation of large-scale electricity storage capacities
Abstract Within Thermo-Electric Energy Storage (TEES) concepts, thermal plants are conceivable for reconversion of stored heat into electricity. By this means, new areas of application for existing thermal plants are established and the costs of the ...
2016 / Philipp Vinnemeier, Manfred Wirsum, Damien Malpiece, Roberto Bove -
Study of error modeling in kinematic calibration of parallel manipulators2016 / L. Wang, Y. Liu, J. Wu, J. Wang, B. Zhang
-
Designation and Control of Landing Points for Competitive Robotic Table Tennis2015 / Jing Li, Xiaopeng Chen, Qiang Huang, Xuechao Chen, Zhangguo Yu, et al.
-
The combustion behavior of large scale lithium titanate battery2015 / Peifeng Huang, Qingsong Wang, Ke Li, Ping Ping, Jinhua Sun
-
Comparison of Steering Interventions in Time-critical Scenarios
Abstract The present study focuses on steering interventions that “push” the driver's vehicle away from the obstacle suddenly entering the vehicle's trajectory from the side of the road (e.g. a cyclist or a car leaving a parking space). The main...
2015 / Norbert Schneider, Christian Purucker, Alexandra Neukum -
Fundamental framework toward optimal design of product platform for industrial three-axis linear-type robots
Abstract This paper discusses an optimization-based approach for the design of a product platform for industrial three-axis linear-type robots, which are widely used for handling objects in manufacturing lines. Since the operational specifications...
2015 / Kana Sawai, Yutaka Nomaguchi, Kikuo Fujita -
Fault feature extraction method based on local mean decomposition Shannon entropy and improved kernel principal component analysis model2016 / J. Sheng, S. Dong, Z. Liu, H. Gao
-
Analysis of the Influence of Microcellular Injection Molding on the Environmental Impact of an Industrial Component2014 / D. Elduque, I. Claveria, A. Fernandez, C. Javierre, C. Pina, et al.
-
Propeller and inflow vortex interaction: vortex response and impact on the propeller performance2016 / Yannian Yang, Teng Zhou, Andrea Sciacchitano, Leo Veldhuis, Georg Eitelberg
-
Advanced approaches of modeling and measurement for turbulence and heat transfer2016 / G. Xie, Y. H. Wu, S. Nardini, B. Wiwatanapataphee, N. Gui, et al.
-
Adaptive Terminal Sliding Mode Control of Electromagnetic Spacecraft Formation Flying in Near-Earth Orbits2014 / J. Zhang, C. Yuan, D. Jiang, D. Jin
-
Integrated model of assisted parking system and performance evaluation with entropy weight extended analytic hierarchy process and two-tuple linguistic information2016 / Y. Hua, H. Jiang, S. Ma, D. Zhang, J. Ma
-
Study on Heat Transfer Calculation Method of Ground Heat Exchangers Based on Heat Pump Unit Operation Characteristics
Abstract For ground source heat pump (GSHP) system, the dynamic heat rejected to or extracted from the ground is an important parameter to analyze the heat transfer performance of ground heat exchanger (GHE). Coupled with dynamic indoor load and...
2016 / Wenxin Li, Yong Wang, Yitao Jin -
Numerical and heat transfer analysis of shell and tube heat exchanger with circular and elliptical tubes2016 / J. Bala Bhaskara Rao, V. Ramachandra Raju
-
Design analysis of machine tool structure with artificial granite material2016 / T.-C. Chen, Y.-J. Chen, M.-H. Hung, J.-P. Hung
-
Assessment of finite element and smoothed particles hydrodynamics methods for modeling serrated chip formation in hardened steel2016 / U. Umer, M. K. Mohammed, J. A. Qudeiri, A. Al-Ahmari
-
A Two-stage approach for an optimum solution of the car assembly scheduling problem Part 1. Problem statement, solution outline and tutorial example2015 / Michał Mazur, Antoni Niederliński
-
Experimental Evaluation of the Effect of Variable Compression Ratio on Performance and Emission of SI Engine Fuelled with Petrol and n-Butanol Blend at Different Loads
Summary Never ending demand for efficient and less polluting engines have always inspired newer technologies. Extensive study has been done on variable compression ratio, a promising in-cylinder technology, in the recent past. The present work is an ...
2016 / Rinu Thomas, M. Sreesankaran, Jeevan Jaidi, Dileep M. Paul, P. Manjunath -
A heatstroke prediction and prevention system for outdoor construction workers2013 / Nobuyoshi Yabuki, Takuya Onoue, Tomohiro Fukuda, Shinji Yoshida
-
Optimum Design of Geometrically Nonlinear Double-Layer Domes by Firefly Metaheuristic Algorithm2013 / R. Kamyab Moghadas, A. Garakani, M. Kalantarzadeh