Mechanical engineering topic list of research papers
-
Geometrical Vision Measurement in Mechanical Engineering2014 / F. Zhou, E. Zappa, L.-C. Chen
-
All Terrain Vehicle Flexible Multibody Dynamic Simulation for Fatigue Prediction2013 / J.-S. Chen, H.-Y. Hwang
-
Effect Analysis of Geometric Parameters on Stainless Steel Stamping Multistage Pump by Experimental Test and Numerical Calculation2013 / C. Wang, W. Shi, L. Zhou, W. Lu
-
Effect of Restricted Sight on Right-Turn Driver Behavior with Pedestrians at Signalized Intersection2014 / J. Jin, W. Wang, G. Wets, X. Wang, Y. Mao, et al.
-
PDPA Investigation on an Electrostatically-Assisted Twin-Fluid Atomization Flow2014 / Z. Wang, J. Z. Wen, J. Wang, Q. Dong
-
A Literature Review of Approaches for Stick-Slip Vibration Suppression in Oilwell Drillstring2014 / X. Zhu, L. Tang, Q. Yang
-
Performance Analyses of IDEAL Algorithm on Highly Skewed Grid System2014 / D. Sun, J. Xu, P. Ding
-
Modelling, Simulations, and Optimisation of Electric Vehicles for Analysis of Transmission Ratio Selection2013 / P. D. Walker, S. Abdul Rahman, B. Zhu, N. Zhang
-
Dimensional Accuracy Enhancement in CNC Batch Grinding through Fractional Order Iterative Learning Compensation2014 / T. Chen, X. Tian, Y. Li
-
Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles2014 / C. Piao, C. Jiang, H. Qiao, C. Cho, S. Lu
-
Pedestrian crash risk assessment and intervention2016 / M. Miao, Y. Yang, Y. Liang
-
Experimental Study on Nonlinear Vibrations of Fixed-Fixed Curved Beams2016 / Ajay Kumar, B. P. Patel
-
3D Wide FOV Scanning Measurement System Based on Multiline Structured-Light Sensors2014 / H. Gao, F. Zhou, B. Peng, Y. Wang, H. Tan
-
Estimation of Cast Iron Substitute Thermal Capacity Using the Experimental Data2016 / E. Majchrzak, J. Mendakiewicz, B. Mochnacki
-
Prediction of bus passenger trip flow based on artificial neural network2016 / S. Yu, C. Shang, Y. Yu, S. Zhang, W. Yu
-
Validation of some engine combustion and emission parameters of a bioethanol fuelled DI diesel engine using theoretical modelling
Abstract Earlier reports indicate that ethanol/bioethanol can replace conventional diesel fuel by 15%, when it is emulsified with diesel and used as an alternative fuel in a compression ignition (CI) engine. In this study, initially BMDE15, a...
2015 / Murugan Sivalingam, Subranshu Sekhar Mahapatra, Dulari Hansdah, Bohumil Horák -
Adaptive location of repaired blade for multi-axis milling
Abstract Free-form blades are widely used in different industries, such as aero-engine and steam turbine. Blades that are damaged during service or have production deficiencies are usually replaced with new ones. This leads to the waste of expensive ...
2015 / Baohai Wu, Jian Wang, Ying Zhang, Ming Luo -
Design of controller for mobile robot in welding process of shipbuilding engineering
Abstract The present study describes the development of control hardware and software for a mobile welding robot. This robot is able to move and perform welding tasks in a double hull structure. The control hardware consists of ...
2015 / Namkug Ku, Sol Ha, Myung-Il Roh -
Sound transmission loss of windows on high speed trains2016 / Yumei Zhang, Xinbiao Xiao, David Thompson, Giacomo Squicciarini, Zefeng Wen, et al.
-
The design, simulation, and experiment of high-accuracy multi-axle electro-hydraulic control servo steering system2016 / H. Du, J. Wei, J. Fang