Mechanical engineering topic list of research papers
-
Numerical Simulation of Liquid Sloshing Problem under Resonant Excitation2014 / F.-k. Gui, S.-c. Jiang
-
Assembly Operation Optimization Based on Social Radiation Algorithm for Autobody2014 / Y. Xing, Y. Wang
-
On the Flow Instabilities and Turbulent Kinetic Energy of Large-Scale Francis Hydroturbine Model at Low Flow Rate Conditions2014 / W.-T. Su, X.-B. Li, F.-C. Li, X.-Z. Wei, J.-T. Liu, et al.
-
The Environmental Effect on the Dynamical Behaviors of Single-Walled Carbon Nanotube in Water2014 / Y. Yan, W. Li, W. Wang
-
A review onin situstiffness adjustment methods in MEMS2016 / M L C de Laat, H H Pérez Garza, J L Herder, M K Ghatkesar
-
Numerical Study on Flow and Heat Transfer Performance of Rectangular Heat Sink with Compound Heat Transfer Enhancement Structures2014 / D. Zhang, S. Guo, Z. Shen, Y. Xie
-
Performance Assessment of Low-Temperature Thermal Storage with Electromagnetic Control2014 / Y.-W. Lee
-
Modeling Flexible Bodies in Multibody Systems in Joint-Coordinates Formulation Using Spatial Algebra2014 / M. A. Omar
-
Analysis and Reduction of Stray-Current Attack in Reciprocated Traveling Wire Electrochemical Machining2014 / Y. Zeng, H. Ji, X. Fang, Y. Wang, N. Qu
-
Adaptive Algorithm for the Quality Control of Braided Sleeving2014 / M. Pipan, A. Kos, N. Herakovic
-
Remanufacturing the Pinion: An Application of a New Design Method for Spiral Bevel Gears2014 / B. Lei, G. Cheng, H. Lowe, X. Wang
-
Thermomechanical Fatigue Life Prediction for a Marine Diesel Engine Piston considering Ring Dynamics2014 / T. He, X. Lu, D. Zou, Y. Guo, W. Li, et al.
-
Development of Discrete Adjoint Approach Based on the Lattice Boltzmann Method2014 / M. H. Hekmat, M. Mirzaei
-
Carbon Dioxide Mitigation Benefit of High-Speed Railway in Terms of Carbon Tax2013 / F. Yanbing, Z. Sufen, X. Meiquan, L. Shuping, H. Zelin
-
Green’s Function In Free Axisymmetric Vibration Analysis Of Annular Thin Plates With Different Boundary Conditions2015 / K.K. Żur
-
Influence of Machining Parameters on Heat Generation During Milling of Aluminum Alloys
Abstract Thin-walled components, i.e. fuselage frames of airplanes, are prone to an unstable process behavior during milling. Therefore, tools with a chamfer between the cutting edge and the flank face are often used for such machining tasks. During ...
2016 / B. Denkena, J. Brüning, D. Niederwestberg, R. Grabowski -
Investigation of the Hydrodynamics of Sweep Blade in Hi-Speed Axial Fuel Pump Impeller2013 / R. Tao, R. Xiao, W. Yang, F. Wang, Y. Wu
-
Numerical Calculation on Cavitation Pressure Pulsation in Centrifugal Pump2014 / W. Shi, C. Wang, W. Wang, B. Pei
-
A New Method of Improving Low-Speed Performance of Variable Speed Hydraulic Systems: By Leaking Parallel Valve Control2014 / H. Ding, J. Zhao
-
Powder-Bed Stabilization for Powder-Based Additive Manufacturing2014 / A. Zocca, C. M. Gomes, T. Muhler, J. Gunster