Mechanical engineering topic list of research papers
-
A Stiffness-Adjusting Method to Improve Thrust Efficiency of a Two-Joint Robotic Fish2014 / D. Xu, S. Zhang, L. Wen
-
Trim Optimization of Ship by a Potential-Based Panel Method2013 / X. Lv, X. Wu, J. Sun, H. Tu
-
Adjusting Frequency of Pump Blade Angles and Optimal Operation for Large Pumping Station System2013 / X. Feng, B. Qiu
-
Heat Transfer in Nanofluids 20132014 / O. Manca, Y. Jaluria, G. Lauriat, K. Vafai, L. Wang
-
Finite Element Based Viscous Numerical Wave Flume2013 / J. Qin, B. Chen, L. Lu
-
Advances in Propulsive Bionic Feet and Their Actuation Principles2014 / P. Cherelle, G. Mathijssen, Q. Wang, B. Vanderborght, D. Lefeber
-
Study on the Extraction Method of Deformation Influence Factors of Flexible Material Processing Based on Information Entropy2014 / Y. Deng, Q. Lu, J. Chen, S. Chen, L. Wu, et al.
-
Fabricating Zr-Based Bulk Metallic Glass Microcomponent by Suction Casting Using Silicon Micromold2014 / Z. Zhu, C. Yi, T. Shi, Y. Gao, C. Wen, et al.
-
Time-Dependent Shear-Induced Nonlinear Viscosity Effects in Dilute CTAC/NaSal Solutions: Mechanism Analyses2014 / N. Xu, J. Wei
-
Development of an FPGA-Based Motion Control IC for Caving Machine2014 / C.-K. Lai, Y.-T. Tsao, S.-L. Tsai, W.-N. Chien
-
Particle Filter Algorithm for Object Tracking Based on Color Local Entropy2013 / H. Wang, Q. Wang, Y. Li, Y. Dai
-
Development of Three-Dimensional Strip Profile Model for Thin-Foil Cold Rolling2014 / S.-H. Lee, K.-H. Lee, D.-C. Ko, S.-B. Lee, B.-M. Kim
-
Transition study of 3D aerodynamic configures using improved transport equations modeling
Abstract As boundary layer transition plays an important role in aerodynamic drag prediction, the proposal and study of transition prediction methods simulating the complex flow phenomena are prerequisite for aerodynamic design. In this paper, with...
2016 / Jiakuan Xu, Junqiang Bai, Yang Zhang, Lei Qiao -
Hemodynamics Modeling and Simulation of Anterior Communicating Artery Aneurysms2014 / J. Li, S. Wang, G. Lu, X. Zhang
-
Mechanical Augmentation Channel Design for Turbine Current Generators2014 / E. Garcia, R. Piza, X. Benavides, E. Quiles, A. Correcher, et al.
-
A two-phase single-reciprocating-piston heat conversion engine: Non-linear dynamic modelling
Abstract A non-linear dynamic framework is presented for the modelling of a novel two-phase heat engine termed ‘Up-THERM’, which features a single solid moving-part (piston). When applied across the device, a constant temperature difference between...
2016 / Christoph J.W. Kirmse, Oyeniyi A. Oyewunmi, Aly I. Taleb, Andrew J. Haslam, Christos N. Markides -
Tool Wear and Formation Mechanism of White Layer When Hard Milling H13 Steel under Different Cooling/Lubrication Conditions2014 / S. Zhang, J. Li, H. Lv
-
Terrestrial laser scanning technology for deformation monitoring and surface modeling of arch structures
Abstract Terrestrial laser scanning (TLS) is capable to be a reliable deformation monitoring device with high-precision for concrete composite structures. Measurements based on TLS for an arch structure with monotonic loading is carried out. In this ...
2016 / Hao Yang, Mohammad Omidalizarandi, Xiangyang Xu, Ingo Neumann -
Marker Identification Technique for Deformation Measurement2013 / H. Wang
-
Numerical Investigation of Periodically Unsteady Pressure Field in a High Power Centrifugal Diffuser Pump2014 / J. Pei, W. Wang, S. Yuan, J. Mao