Mechanical engineering topic list of research papers
-
Effects of Annealing on TiN Thin Film Growth by DC Magnetron Sputtering2014 / A. Jafari, Z. Ghoranneviss, A. S. Elahi, M. Ghoranneviss, N. F. Yazdi, et al.
-
Stability of Weak Confined Wake Behind a Cylinder in Fully Developed Turbulent Channel Flow
Abstract The motivation for the study of instability of turbulent wake flow in a confined turbulent channel was multi-fold. First, the instability of confined wake flows has not been studied much. Second, confined wakes are found to retain their...
2015 / T. Vijaya Kumar, P.K. Sen, S.V. Veeravalli, Munendra Kumar -
Simulation of Two-Dimensional Supersonic Flows on Emulated-Digital CNN-UM2009 / Sándor Kocsárdi, Zoltán Nagy, Árpád Csík, Péter Szolgay
-
Ascertaining Life Cycle Inventory Data for Electrical Discharge Machining
Abstract Sustainable manufacturing systems require accounting for both product and process level environmental impacts. Established methods and databases are available for product level environmental impact assessment. However, there is a lack of...
2016 / Janaka R. Gamage, Anjali K.M. DeSilva, Colin Harrison, David Harrison -
A novel real-time control system for plasma cutting robot with xPC target2016 / M. Soylak
-
Numerical Study on the Characteristics of Pressure Fluctuations in an Axial-Flow Water Pump2014 / Z.-J. Shuai, W.-Y. Li, X.-Y. Zhang, C.-X. Jiang, F.-C. Li
-
Does Pressure Reduction Test have Significant Effect on Evaluating Pressure Management to Reduce Physical Leakage Amount?
Abstract Physical leakage flow is positively correlated with water head in water supply network (WSN). Index model is applied to engineering of pressure management in which physical leakage flow is expressed as index of average head in WSN. The...
2015 / Jinliang Gao, Chengzhi Zheng, Wenyan Wu, Shihua Qi, Xiaoming Xu -
Employment of an Auto-Regressive Model for Knock Detection Supported by 1D and 3D Analyses
Abstract In this work, experimental data, carried out on a twin-cylinder turbocharged engine at full load operations and referred to a spark advance of borderline knock, are used to characterize the effects of cyclic dispersion on knock phenomena....
2015 / D. Siano, E. Severi, V. De Bellis, S. Fontanesi, F. Bozza -
Fan blade crack diagnosis method study2016 / S. Fu, Y. Gao
-
Building Energy Efficiency and Healthy Indoor Environment2014 / X. Li, Y. Zhang, F.-Y. Zhao, S. Pan
-
New design of process for cold forging to improve multi-stage gas fitting2016 / H.-S. Huang, S.-Y. Hsia
-
Geometry and kinematics for a spherical-base integrated parallel mechanism2016 / Jie Sun, Xinsheng Zhang, Guowu Wei, Jian S. Dai
-
Diagnostics of machine parts by means of reverse engineering procedures2015 / J. Rysinski, I. Wrobel
-
Influences of affiliated components and train length on the train wind2016 / Dilong Guo, Keming Shang, Ye Zhang, Guowei Yang, Zhenxu Sun
-
Multilevel Comprehensive Evaluation of the Railway Service Quality
Abstract A multilevel fuzzy synthetic evaluation model to evaluate the railway service quality is proposed based on the fuzzy theory. An evaluation indicator system with three grades evaluation indicators is established, and their weights are...
2016 / Laura Eboli, Yanbing Fu, Gabriella Mazzulla -
A reliability-based maintenance technicians’ workloads optimisation model with stochastic consideration2015 / D. E. Ighravwe, S. A. Oke, K. A. Adebiyi
-
Empirical Mode Decomposition Method Based on Wavelet with Translation Invariance2008 / Qin Pinle, Lin Yan, Chen Ming
-
Teaching Mechanical Design Practice in Academia
Abstract In many research universities, mechanical engineering (ME) curriculum does not include courses that teach ME students essential professional knowledge needed to become a design engineer. Professional know-how is not regarded as an academic...
2015 / Kfir Cohen, Reuven Katz -
Yongxiang Lu on China's Design and Innovation Policy2016 / Yongxiang Lu
-
Study on creep damage and life prediction of threaded connections at high temperature2016 / Q. Yu, H. Zhou