Mechanical engineering topic list of research papers
-
Projector Calibration for Pattern Projection Systems
Abstract In this paper we proposed a method for geometric calibration of a projector. This method makes use of a calibrated camera to calibrate the projector. Since the projector works inversely with a camera i.e., it projects the image instead of...
2015 / I. Din, H. Anwar, I. Syed, H. Zafar, L. Hasan -
Effects of blade lean angle on a hydraulic retarder2016 / M. Chen, X. Guo, G. Tan, X. Pei, W. Zhang
-
Evaluation method of adhesive joint strength based on the normal-shear stress of adhesive interface and its application in engineering2015 / N. Jingxin, L. Yu, T. Shizhen, C. Liang, Y. Yakun
-
Effect of various W-beam guardrail post spacings and rail heights on safety performance2015 / T.-L. Teng, C.-C. Liang, T.-T. Tran
-
Matching Performance of Falling Film Generation Process
Abstract In this paper, the match properties have been discussed with a simplified heat and mass transfer model of generator. It is revealed that besides the heat and mass transfer coefficients, the inlet parameters (temperature, concentration, flow ...
2015 / Zheng Shuying, Xiaoyun Xie, Yi Jiang -
Analysis of process parameters in surface grinding using single objective Taguchi and multi-objective grey relational grade
Summary Close tolerance and good surface finish are achieved by means of grinding process. This study was carried out for multi-objective optimization of MQL grinding process parameters. Water based Al2O3 and CuO nanofluids of various concentrations ...
2016 / Prashant J. Patil, C.R. Patil -
Multiobjective Optimization of CRH3 EMU Wheel Profile2015 / F. Lin, X. Dong, Y. Wang, C. Ni
-
Co-operative ITS: ESD a Smartphone Based System for Sustainability and Transportation Safety
Abstract Co-operative Intelligent Transportation Systems (C-ITS) are emerging rapidly due to recent development in Global Navigation Satellite System GNSS systems and mobile internet. The main goal of these systems is to improve traffic conditions...
2016 / Vittorio Astarita, Demetrio Carmine Festa, Pasquale Giofrè, Giuseppe Guido, Domenico Walter Edvige Mongelli -
Thermal Performances of Heat Conducting Oil Steam Generator
Abstract Thermal performances of heat conducting oil steam generator in parabolic trough solar system are experimentally and numerically investigated. According to experimental results, the heat flux density of steam generator mostly increases with...
2015 / Yibo Yuan, Jing Ding, Jianfeng Lu, Jianping Yang -
An Architecture for Predicting Two-dimensional Traffic Collision Considering Shape
Abstract In this decade, the improvement of vehicular network gave impetus to vehicle collision warning systems (CWS), which serve to curb the wounded and fatalities in crashes. Many position-based CWS and corresponding collision avoidance...
2016 / Fei Teng, Jianqun Wang -
A Mechanistic Cutting Force Model for New Barrel End Mills
Abstract The complexity and increasing demand of turbomachinery components manufactured for the aerospace sector has led these parts to become reference of the research and development of 5-axis machining. We can highlight as key components the...
2015 / E. Artetxe, G. Urbikain, A. Lamikiz, L.N. López-de-Lacalle, R. González, et al. -
Mathematical Description of Unilateral Constraints for Discrete Mechanical Systems
Abstract The paper deals with mathematical description of unilateral constraints imposed on displacements and velocities. Discrete mechanical system are analyzed. Mathematical description of the problem concerning the interaction between material...
2015 / Wiesław Grzesikiewicz, Artur Zbiciak -
Generation of Complex Surfaces by Superimposed Multi-dimensional Motion in Electrochemical Machining
Abstract In electrochemical machining the shape of the machined surface corresponds to the shape of the cathode and the applied electrical charge. In order to increase the flexibility of electrochemical machining for the generation of complicated...
2016 / Andreas Schubert, Matthias Hackert-Oschätzchen, André Martin, Sebastian Winkler, Danny Kuhn, et al. -
Arbitrary vehicle steering characteristics with changing ratio rack and pinion transmission2015 / A. G. Bendefy, A. Piros, P. Horak
-
The influence of hollow billet thickness in rotary compression2015 / Janusz Tomczak, Zbigniew Pater, Tomasz Bulzak
-
Design and analysis of diaphragms in dynamic microphones2015 / Z.-G. Huang, S.-J. Shiu
-
Effect of tapered roller bearing supports on the dynamic behaviour of hypoid gear pair differentials2015 / M. Mohammadpour, P. M. Johns-Rahnejat, S. Theodossiades, H. Rahnejat
-
An Improved General Motor Car-Following Model considering the Lateral Impact2015 / P. Tao, H. Hu, Z. Gao, Z. Li, X. Song, et al.
-
Computer-aided diagnosis of abnormal breasts in mammogram images by weighted-type fractional Fourier transform2016 / Y.-D. Zhang, S.-H. Wang, G. Liu, J. Yang
-
SIMULATION OF POWDER SINTERING USING A DISCRETE ELEMENT MODEL2014 / Jerzy Rojek, Szymon Nosewicz, Katarzyna Pietrzak, Marcin Chmielewski