Mechanical engineering topic list of research papers
-
Effect of Surface Roughness on the Squeeze Film Lubrication of Finite Poroelastic Partial Journal Bearings with Couple Stress Fluids: A Special Reference to Hip Joint Lubrication2014 / N. B. Naduvinamani, G. K. Savitramma
-
Stable Operation and Electricity Generating Characteristics of a Single-Cylinder Free Piston Engine Linear Generator: Simulation and Experiments2015 / Huihua Feng, Yu Song, Zhengxing Zuo, Jiao Shang, Yaodong Wang, et al.
-
Combined Effect of Two Approximations to Critical Parameters in the Spontaneous Combustion of Cellulosic Materials
Abstract In the theory of Frank-Kamenetskii, the values of the critical Frank-Kamenetskii parameter and critical dimensionless temperature were obtained at two approximations. As we care more about the spontaneous of organic materials,we want to...
2016 / Jun-wei Feng, Dong Liang, Quan-bing Luo -
Surface Water Source Heat Pump Air Conditioning System Simulation and Operation Performance Analysis
Abstract This paper established a heat pump system model containing heat pump unit model, AC load model and heat exchanger model utilizing the mass and energy balance and the structure's designing method. This paper also developed the surface water...
2015 / Nan Lv, Qing Zhang, Dongsheng Wu, Zhenqian Chen -
Effect of surface roughness using different adherend materials on the adhesive bond strength2015 / S. Budhe, A. Ghumatkar, N. Birajdar, M. D. Banea
-
Turbulent flow and heat transfer in eccentric annulus2009 / NIKOLAY NIKITIN, HENGLIANG WANG, SERGEI CHERNYSHENKO
-
An NTC Zone Compliant Knock Onset Prediction Model for Spark Ignition Engines
Abstract Pollutant emissions reduction and energy saving policies increased the production of Spark Ignition (SI) engines operated with gaseous fuels. Natural Gas (NG) and Liquefied Petroleum Gas (LPG), thanks to their low cost and low environmental ...
2015 / Emiliano Pipitone, Giuseppe Genchi, Stefano Beccari -
Development of a flattening system for sheet metal with free-form surface2016 / X. Liu, S. Li, X. Zheng, M. Lin
-
Genetic algorithm-based varying parameter linear quadratic regulator control for four-wheel independent steering vehicle2015 / L. Gao, L. Jin, F. Wang, Y. Zheng, K. Li
-
Computer-aided design and simulation of strip layout for progressive die planning using Petri nets2016 / H. M. A. Hussein, S. Kumar, E. S. Abouel Nasr
-
Finite difference method-based calculation of gravity deformation curve for the large-span beam of heavy-duty vertical lathe2016 / Z. Han, H. Wang, Z. Shao, H. Fu, H. Jiang, et al.
-
On shear sheltering and the structure of vortical modes in single- and two-fluid boundary layers2009 / TAMER A. ZAKI, SANDEEP SAHA
-
An Approximation to the Probability Normal Distribution and its Inverse
Abstract Mathematical functions are used to compute Normal probabilities, which absolute errors are small; however their large relative errors make them unsuitable to compute structural failure probabilities or to compute the menace curves of...
2015 / Alamilla-López Jorge Luis -
Implementation of knowledge-based engineering methodology in hydraulic generator design2015 / W. Guo, J. Wen, H. Shao, L. Wang
-
Extraction methods for uncertain inference rules by ant colony optimization2015 / Ling Chen, Yun Sun, Yuanguo Zhu
-
Optimal dynamic production and price for reliability-dependent imperfect production with inventory-level-dependent demand in uncertain environment2014 / Samar Hazari, Kalipada Maity, Jayanta Dey, Samarjit Kar
-
Definition of a CFD Methodology to Evaluate the Cylinder Temperature Distribution in Two-Stroke Air Cooled Engines
Abstract On the basis of the operating cooling fluid, internal combustion engine cooling systems can be classified in two macro areas: air-cooling system and liquid-cooling system. In four-stroke engines, liquid-cooling system is...
2015 / Federico Brusiani, Stefania Falfari, Claudio Forte, Giulio Cazzoli, Paolo Verziagi, et al. -
Local fractional variational iteration algorithm II for non-homogeneous model associated with the non-differentiable heat flow2015 / Y. Zhang, H. M. Srivastava, M.-C. Baleanu
-
An effective co-evolutionary quantum genetic algorithm for the no-wait flow shop scheduling problem2015 / G. Deng, M. Wei, Q. Su, M. Zhao
-
Mechanical and Microstructural Evaluation of DMAG Welding of Structural Steel2015 / T. Mert, N. Gultekin, A. Karaaslan