Mechanical engineering topic list of research papers
-
A unified modeling and control design for precision transmission system with friction and backlash2016 / X. Bao, J. Mao, X. Luo
-
Deterministic and multi-scenario models for pallet allocation over a pallet pool in a city joint distribution system2016 / J. Wu, J. Ren, B. Liu, T. Lu
-
Effect of stagnation temperature on supersonic flow parameters application for air in nozzles2016 / T. Zebbiche, Z. Youbi
-
Numerical Investigation on the Benefits of Preheating for an Increased Thermal Radius of Influence During Steam Injection in Saturated Soil2016 / Kilian Weishaupt, Alexandre Bordenave, Olivier Atteia, Holger Class
-
Experimental test of static and dynamic characteristics of tilting-pad thrust bearings2015 / A. Guo, X. Wang, J. Jin, D. Y. Hua, Z. Hua
-
Benchmark solutions for two-dimensional fluid flow and heat transfer problems in irregular regions using multigrid method2015 / J. Li, B. Yu, M. Wang
-
Enhanced active dynamic balancing of the planar robots using a three-rotating-bar balancer2016 / K. Wang, K. Li, Q. Zhang, M. Luo, P. Chen
-
Suppression of panel flutter of near-space aircraft based on non-probabilistic reliability theory2016 / Y.-W. Zhang, G.-Q. Jiang, B. Fang
-
Diesel Engine Cycle Analysis of Two Different TBC Combustion Chamber
Abstract Efficient energy usage and energy conservation is the today's requirement for all researchers of IC engine. The usual method of producing heat from fuel is by the process of combustion, which is a chemical reaction between the fuel and...
2016 / D.C. Gosai, H.J. Nagarsheth -
Heat transfer characteristics of circular and elliptic cylinders in cross flow2015 / J. M. Park, O. J. Kim, S. J. Kim, Y.-C. Shin
-
CAD/CAM for Double Woven Fabric: Center Warp Stitching2014 / M. Alali, J.-Y. Drean
-
Study on the dynamic characteristics of a soft yoke mooring system for floating production storage and offloading based on field measurements2015 / Z. Fan, Q. Yue, X. Qi, Y. Wang
-
A fictitious domain method with the distributed Lagrange multiplier for incompressible viscous flow around moving particle2009 / Takuya Muroi, Mutsuto Kawahara
-
The Mechanism of Transforming the Movements of a Two-stroke-Engine Piston and the Operational Characteristics of its Elements of Strength
Abstract The article provides a new design of crankless piston heat car (engine), which runs a two-stroke cycle. It describes its operational principles and dwells upon the forces that affect the main elements of the mechanical transformation of the ...
2015 / Boris Sharoglazov, Aleksandr Gofman -
Determination of Tracking Errors with Respect to the Geometrical Errors based on Optimization Algorithm
Abstract Accurate dual-axis sun tracking is the key feature of a heliostat and is critical for the performance of a solar tower power plant. The primary tracking errors with respect to the geometrical errors could be theoretically determined from...
2014 / Feihu Sun, Zhifeng Wang, Minghuan Guo, Fengwu Bai, Zijian Xu -
Free vibration analysis of open circular cylindrical shells by the method of reverberation-ray matrix2016 / D. Tang, L. Sun, X. Yao, X. Yue
-
Global Motion Model for Stereovision-Based Motion Analysis2006 / Jia Wang, Zhencheng Hu, Keiichi Uchimura, Hanqing Lu
-
Research on Heat Recovery System of Turbine Exhaust Steam Using Absorption Heat Pump for Heating Supply Based on Heating Load Characteristics
Abstract In order to improve the energy utilization efficiency of thermal power plants and to solve the heating shortage problem in China, the absorption heat pump is usually employed to recover the heat of turbine exhaust steam for heating supply....
2015 / Jinshi Wang, Kai Xia, Weixiong Chen, Ming Liu, Datong Chong, et al. -
Optimization of transmission system design based on genetic algorithm2016 / X. Chen, X. Zhi, H. Song
-
A Cooperative Control Method for Fully Mechanized Mining Machines Based on Fuzzy Logic Theory and Neural Networks2015 / C. Tan, L. Si, X. Zhou, Z. Wang, K. Wang