Mechanical engineering topic list of research papers
-
Influence of apparent wave velocity on seismic performance of a super-long-span triple-tower suspension bridge2015 / H. Wang, J. Li, T. Tao, C. Wang, A. Li
-
Simulation and analysis of road construction traffic flow in urban road networks2015 / J. Shi, Y. Hu, S. Li, Z. Li, X. Zhang, et al.
-
Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves
Abstract Leakage due to wear is one of the main failure modes of aero-hydraulic spool valves. This paper established a practical coupling wear model for aero-hydraulic spool valves based on dynamic system modelling theory. Firstly, the experiment...
2016 / Chen Yunxia, Gong Wenjun, Kang Rui -
Integrated dynamics modeling for supercavitating vehicle systems2015 / Seonhong Kim, Nakwan Kim
-
Analysis and design of permanent magnet biased magnetic bearing based on hybrid factor2016 / J. Sun, G. Bai, Y. Le, C. Peng
-
An integrated study of the workspace and singularity for a Schönflies parallel manipulator
Abstract This paper presents a simple and systematic approach to formulate the inverse position problem of a Schönflies parallel manipulator. As a result, the inverse position problem is solved in closed form and leads directly to the automatic...
2016 / J. Jesús Cervantes-Sánchez, José María Rico-Martínez, Víctor Hugo Pérez-Muñoz -
Ergonomic Design of the Vehicle Motion in an Automated Driving Car
Abstract This article presents a concept for the design of an automated driving system that uses the driver's motion perception to feed back the automation system's state and intention. The motivation for this approach is to keep the driver in the...
2015 / Alexander Lange, Martin Albert, Karl-Heinz Siedersberger, Klaus Bengler -
Numerical simulation of temperature field and thermal stress field in the new type of ladle with the nanometer adiabatic material2015 / G. Li, J. Liu, G. Jiang, H. Liu
-
Flow Field Design in Electrochemical Machining of Diffuser
Abstract The diffuser which is usually made from hard-to-machine nickel-based and titanium-based alloys is a key component in the aero engine. In the electrochemical machining, the electrolyte flow mode has great effect on the machining stability...
2016 / Dong Zhu, Zhouzhi Gu, Tingyu Xue, Di Zhu -
Iterative learning control of high-acceleration positioning table via sensitivity identification2016 / J. Cui, Z. Chu, D. Wang
-
Autonomous gliding entry guidance with geographic constraints
Abstract This paper presents a novel three-dimensional autonomous entry guidance for relatively high lift-to-drag ratio vehicles satisfying geographic constraints and other path constraints. The guidance is composed of onboard trajectory planning...
2015 / Jie Guo, Xuzhong Wu, Shengjing Tang -
Exergy Analysis of the Coal Gasification Process in Ex-Situ Conditions
Abstract In this article the possibilities of implementing exergy analysis of coal gasification processes in ex-situ conditions was presented. The analysis was performed in order to detect the sources of exergy loss. The experimental results of the...
2015 / Tomasz Janoszek -
Derailment risk and dynamics of railway vehicles in curved tracks: Analysis of the effect of failed fasteners2016 / Silvia Morales-Ivorra, Julia Irene Real, César Hernández, Laura Montalbán
-
Influence of the Longitudinal and Lateral Suspension Damping on the Vibration Behaviour in the Railway Vehicles2015 / Mădălina Dumitriu
-
Numerical Study of Compressor Fouling Mechanism Based on Eulerian–Eulerian Approach
Abstract The paper describes a fluid dynamic numerical model to study the fouling mechanism for turbomachines (such as large gas turbines and small turbochargers). For this purpose, the gas-particle behaviour over a compressor blade is modelled...
2015 / Keyvan Shaabani Lakeh, Alberto Martinelli, Augusto De La Torre, Gianluca Montenegro, Angelo Onorati -
Classification of Urban Emergency Based on Fuzzy Analytic Hierarchy Process
Abstract Classification of emergency is the important premise of making pre-plan, and basis of allocation supplies and rescuers scientifically, as well as the key technology of emergency management. The previous studies of emergency grading...
2016 / Yaqin He, Shengpin Du -
A numerical parametric study on hydrofoil interaction in tandem2015 / Omer Kemal
-
Determination of Longitudinal Forces in the Cars Automatic Couplers at Train Electrodynamic Braking
Abstract During the research an analysis of forces which arise at the car automatic couplers in the course of electrodynamic braking of a train moving on the given railway profile has been performed. As the initial data dependences of the train...
2016 / Iryna Varazhun, Alexandr Shimanovsky, Aliaksandar Zavarotny -
Traffic density determination and its applications using smartphone
Abstract Smartphone is progressively becoming a dominant platform for many transportation applications. This paper introduces a new application for using smartphones to measure traffic density and speed. The proposed system consists of two...
2016 / Al-Sayed Ahmed Al-Sobky, Ragab M. Mousa -
Prototyping of Acceleration Sensor by Using Lathe-type Electro-chemical Discharge Machine
Abstract This paper deals with an application to fine part fabrication by electro-chemical discharge machining (ECDM) with a lathe type machine. In the fine part ECDM, a tool electrode was held with a 2-axis force sensor or a rigid support. Because...
2016 / Katsushi Furutani, Shunsuke Kojima