Mechanical engineering topic list of research papers
-
Assessment of firefighters-rescuers' work severity in relation with interaction between physical and mental load2010 / Ženija Roja, Valdis Kaļķis, Henrijs Kaļķis, Ilmārs Pencis
-
Remanufacturing-Oriented Geometric Modelling for the Damaged Region of Components
Abstract The accurate additive manufacturing technology provides an effective and efficient means for remanufacturing or repairing high value and damaged engineering components. Important work to implement this technology is to construct the...
2015 / Yingzhong Zhang, Zhenyan Yang, Guangzhi He, Yun Qin, Hong-chao Zhang -
Sound Insulation of Building Elements at Low Frequency: A Modal Approach
Abstract In typical laboratory volumes (50-80 m3) and at low frequencies (50-100 Hz), the acoustic field is non-diffuse due to the presence of source and receiving room modes. Under such conditions, standard sound insulation measurements and...
2015 / Andrea Prato, Alessandro Schiavi -
Finding the best combination of numerical schemes for 2-D SPH simulation of wedge water entry for a wide range of deadrise angles2015 / Mohammad Farsi, Parviz Ghadimi
-
Understanding Space Launch Vehicle Complexity: A Case Study in Combustion Instabilities
Abstract In rocket engine failures of F-1 and Titan-II, chamber combustion instabilities (CI) caused damage, reflecting behavioral complexities at the component level. Combustion chamber walls with embedded acoustic nodes self-excited by the heat...
2015 / Ronald H. Freeman -
Support of Engineering Changes in Manufacturing Systems by Production Planning and Control Methods
Abstract Due to changing customer demand and development of new technologies, manufacturing companies have to implement engineering changes in manufacturing systems. Planning and control of these engineering changes is a key task for the company...
2016 / Daniel Cichos, Jan C. Aurich -
MPSO-Based Model of Train Operation Adjustment
Abstract Scheduling trains in a railway network is a fundamental operational problem in the railway industry. This paper sets up multi-objective optimal model of train operation adjustment, whose optimization objective is to reduce the train delay...
2016 / Lanxia Zhang, Yong Qin, Xuelei Meng, Li Wang, Tao Zhu -
Robot-based System for Handling of Aircraft Shell Parts
Abstract The described system is a cost-effective approach for handling pliable aircraft shell parts. The objective is the preparation for assembly to larger sections. In contrast to a conventional gripper the developed tool is characterized by the...
2014 / Kim Schwake, Jens Wulfsberg -
A Cloud-based Approach for Maintenance of Machine Tools and Equipment Based on Shop-floor Monitoring
Abstract Maintenance and its cost continue, over the years, to draw the attention of production management since the unplanned failures decrease the reliability of the system and also the return of investments. Advanced maintenance techniques that...
2016 / Dimitris Mourtzis, Ekaterini Vlachou, Nikolaos Milas, Nikitas Xanthopoulos -
Dependence of the boiler flue gas losses on humidity of wood biomass2016 / Ladislav Dzurenda, Adrián Banski
-
The Influence of LPG Fuelling on Diesel Engine Cycle Variability
Abstract Liquid Petroleum Gas physic-chemical properties lead to specific aspects of the in-cylinder combustion and mechanical running of diesel engines. Comparative to the classic diesel engine, the cycle variability coefficients (COV) are...
2016 / Alexandru Cernat, Constantin Pana, Niculae Negurescu, Cristian Nutu -
Experimental Investigation of Gravity Heat Pipe Exchanger Applied in Communication Base Station
Abstract This paper proposes a gravity heat pipe exchanger used for cooling the communication base station to replace the air conditioning in winter and transition seasons. Tests were made on the gravity heat pipe exchanger of DHHP 3000 produced by...
2015 / Lianying Zhang, Yuanyuan Liu, Xing Liu, Xiangzhao Meng, Xuan Guo, et al. -
Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling2015 / Joko Sedyono, Homayoun Hadavinia, Demetrios Venetsanos, Denis R. Marchant
-
Using spindle noise to monitor tool wear in a turning process2016 / N. Seemuang, T. McLeay, T. Slatter
-
Development of an integrated engine-hydro-mechanical transmission control algorithm for a tractor2015 / S. Ahn, J. Choi, S. Kim, J. Lee, C. Choi, et al.
-
Method of Structural Design of Heavy Machine Tools
Abstract This paper presents a method of arrangement the frames of heavy lathes with dispersed forces along the coordinate axes of the loads that act on the machine while it is running. Mathematical models of large bearing systems, taking into...
2016 / Viktor Kovalov, Yana Antonenko, Predrag Dašić -
Numerical analysis for supercavitating flows around axisymmetric cavitators2015 / Young Kyun Kwack, Sung Ho Ko
-
Study on Energy Management Strategies for Series-parallel Plug-in Hybrid Electric Buses
Abstract The power flow between the power sources and the performance of plug-in-hybrid electric vehicles (PHEV) significantly in fuel economy are mainly determined by energy management strategy. To research the energy management of the PHEV, the...
2015 / Jiankun Peng, Hongwen He, Rui Xiong -
Sliding Mode Control for Four Wheels Electric Vehicle Drive
Abstract In this research a novel control schema of four wheels drive (4WD) propulsion system control is presented. The present paper introduces novel studies of sliding mode control applied on four independent wheels electric vehicle systems. The...
2016 / Abdelfatah Nasri, Brahim Gasbaoui, Ben Mohammed Fayssal -
Critical Shear Buckling Load of Tapered Plate with Circular Opening
Abstract The elastic shear buckling behavior of tapered plates with circular opening under shear stress has been studied numerically. Also, different aspect ratios and tapering ratios are studied numerically. Several values of circular opening...
2015 / Bassem L. Gendy