Mechanical engineering topic list of research papers
-
A methodology for improving road safety by novel infrastructural and invehicle technology combinations2012 / Marion Wiethoff, Karel Brookhuis, Dick de Waard, Vincent Marchau, Leonie Walta, et al.
-
Experimental Study on Indoor Air Temperature Distribution of Gravity Air-Conditioning for Cooling
Abstract It is important to analyze the indoor temperature field for Gravity air-conditioning, which is a new technology. This paper investigates the vertical and horizontal temperature distribution by experiment. The result shows that in working...
2012 / Cuimin Li, Jianing Zhao -
The Reliability Consideration of Coal Mine Safety Production Monitoring System Network
Abstract This paper introduces membership cloud function and membership cloud generator, then establishes membership cloud function model which is fit for mine. With the application of the model through simulation, the reliability of ring network,...
2012 / Jikun Guo, Yongyan Zhang -
Cutting Tool Geometry for Plunge Milling–Process Optimization for a Stainless Steel
Abstract Roughing strategies are gaining commercial relevance driven by increasing number of components in the energy sector. However, machining strategies which provide high material removal rates at large tool aspect ratios are still not...
2012 / Martin Witty, Thomas Bergs, Alexander Schäfer, Gustavo Cabral -
Modeling Techniques for the Prediction of Workpiece Deflections in NC Milling
Abstract Due to the characteristics of the milling process, modeling workpiece dynamics during the machining of freeform surfaces is a challenge: The relative movement between the milling tool and the workpiece leads to a variation of the excitation ...
2012 / P. Kersting, D. Biermann -
If motion sounds: Movement sonification based on inertial sensor data
Abstract Within last years, movement sonification turned out to be an appropriate support for motor perception and motor control that can display physical motion in a very rich and direct way. But how should movement sonification be configured to...
2012 / Heike Brock, Gerd Schmitz, Jan Baumann, Alfred O. Effenberg -
Study of Waste Heat Recovery From Steam Turbine Xhaust for Vapour Absorption System in Sugar Industry
Abstract Most of the energies are utilized by the industries, due to depletion of fossile fuels and increasing the fuel price to utilize the maximum available energy from the waste heat source. The study is conducted in the turbine exhaust of the...
2012 / K. Balaji, R. Ramkumar -
Review of Aeroelasticity Testing Technology
Abstract Aeroelasticity is the study of the mutual interaction that takes place among the inertial, elastic and aerodynamic forces acting on the structural members exposed to an airstream and the influence of this study on the design. This review...
2012 / M. Sundresan, D. Raja Joseph, R. Karthick, J.C. Sherlin Shibi Joe -
Design of Mobile Phone Networks and Map-matching Navigation System
Abstract Mobile phone location technique is emerged with the development of mobile communication system, and it is a new location technique. Its strong points include low costs and operation costs, easily to carry over, simple system maintenance,...
2012 / Jijing Wanga -
Thermal-structural response and low-cycle fatigue damage of channel wall nozzle
Abstract To investigate the thermo-mechanical response of channel wall nozzle under cyclic working loads, the finite volume fluid-thermal coupling calculation method and the finite element thermal-structural coupling analysis technique are applied....
2013 / Cheng Cheng, Yibai Wang, Yu Liu, Dawei Liu, Xingyu Lu -
Isogeometric design of elastic arches for maximum fundamental frequency2010 / Attila P. Nagy, Mostafa M. Abdalla, Zafer Gürdal
-
Effectiveness Assessment of Pipe Systems by Means of Transient Test-based Techniques
Abstract In this paper, the reliability of transient test-based techniques for detecting pipe system anomalies is shown by means of numerical and experimental tests – both in laboratory and real pipe systems – with particular regard to the case of a ...
2013 / B. Brunone, M. Ferrante, S. Meniconi, C. Massari -
Simulative Parameterization of Dead Time Variable Rotation Speed Behavior to Improve Process Stability in High Performance Cutting
Abstract A common method to improve process stability in machining operations with geometrically defined cutting edges is the variation of dead time behavior of tooth engagement, which is the most responsible influence on regenerative force...
2012 / C. Brecher, R. Hermes, A. Epple, S. Bäumler -
A full scale bicycle aerodynamics testing methodology
Abstract Aerodynamically efficient sport equipment/accessories and athlete's body postures are considered to be the fundamental aspect to achieving better outcomes. Like any other speed sports, the aerodynamic optimization is essential in cycling. A ...
2011 / Harun Chowdhury, Firoz Alam, David Mainwaring -
Simulation-Driven Validation of Advanced Driving-Assistance Systems
Abstract Advanced driving-assistance systems (ADAS) have recently received an increasing attention from the car industry. ADAS development represents a considerable effort to obtain efficient and reliable systems. Driving several million kilometers...
2012 / Assia Belbachir, Jean-Christophe Smal, Jean-Marc Blosseville, Dominique Gruyer -
Driving Support for City Vehicles
Abstract Moving inside a congested traffic is a very stressful scenario for the driver. The paper will address the possible support the vehicle could offer to the driver in such a scenario. These advanced city vehicles introduces driver assistance...
2012 / Gianfranco Burzio, Maurizio Miglietta -
A methodology for the sizing and positioning of emergency exits in tunnels
Abstract The reference law for the construction of new tunnels belonging to the Trans-European Road Network currently calls for the implementation of emergency exits when the expected traffic in the tunnel is larger than 2000 vehicles/hour per lane...
2011 / Sergio d’Elia, Salvatore De Marco, Domenico W.E. Mongelli -
Numerical Investigation of Aerodynamic Parameter's Effects on Heat Transfer Characteristic of Scale like Platelet Inner Duct
Abstract Cooling effectiveness distribution of metal wall surface of scalelike platelet inner duct is studied in this paper by numerical investigation. By changing some parameters like main flow Reynolds number, blowing ration and so on, cooling...
2012 / Hepeng Yuan, Liming He, Jinlua Yu, Tao Jin -
An Empirical Study of the Effects of Road Tunnel on Driving Performance
Abstract This study focused on driving inside road tunnel and is aimed to establish how drivers behave inside tunnel as well as approaching it and exiting from it. The paper analyses the effects of tunnel on drivers performance using driving...
2012 / Alessandro Calvi, Maria Rosaria De Blasiis, Claudia Guattari -
A systematic molecular circuit design method for gene networks under biochemical time delays and molecular noises2009 / Bor-Sen Chen, Yu-Te Chang