Mechanical engineering topic list of research papers
-
Numerical Investigation on a Prototype Centrifugal Pump Subjected to Fluctuating Rotational Speed2014 / Yu-Liang Zhang, Jun-Jian Xiao, Yan-Jun Zhao, Ying-Yu Ji
-
A Case-Based Reasoning Method for Remanufacturing Process Planning2014 / Fan Zhou, Zhigang Jiang, Hua Zhang, Yan Wang
-
A Data-Driven Control Design Approach for Freeway Traffic Ramp Metering with Virtual Reference Feedback Tuning2014 / Shangtai Jin, Zhongsheng Hou, Ronghu Chi, Jiangen Hao
-
Design Mode Analysis of Pareto Solution Set for Decision-Making Support2014 / Satoru Hiwa, Tomoyuki Hiroyasu, Mitsunori Miki
-
Pore Scale Thermal Hydraulics Investigations of Molten Salt Cooled Pebble Bed High Temperature Reactor with BCC and FCC Configurations2014 / Shixiong Song, Xiangzhou Cai, Yafen Liu, Quan Wei, Wei Guo
-
The Resistance of Ship Web Girders in Collision and Grounding2014 / Zhenguo Gao, Song Yang, Zhiqiang Hu
-
Direct Numerical Simulation and Large Eddy Simulation on a Turbulent Wall-Bounded Flow Using Lattice Boltzmann Method and Multiple GPUs2014 / Xian Wang, Yanqin Shangguan, Naoyuki Onodera, Hiromichi Kobayashi, Takayuki Aoki
-
Aircraft Maintenance Decision System Based on Real-time Condition Monitoring
Abstract Aiming at the problem that an aircraft has the capability of real-time condition monitoring but maintenance technicians carry out the maintenance action after equipment malfunction existing aircraft maintenance decision system based on...
2012 / Dehuang Chen, Xiaowei Wang, Jing Zhao -
Modeling and numerical simulation of an Integrated Solar Combined Cycle System in Algeria
Abstract Solar energy from a parabolic trough solar field can be integrated to a combined cycle in several ways to decrease the already low emissions. This is accomplished in an integrated solar-combined cycle system (ISCCS). The trough parabolic...
2012 / Halima Derbal-Mokrane, Sofiane Bouaichaoui, Najla El Gharbi, Mayouf Belhamel, Ahmed Benzaoui -
Nonlinear Dynamic Compensation Research on Temperature Measurement System in Coal Mine Movable Refuge Chamber
Abstract Environmental temperature measurement is a very important issue of environmental control system in coal mine movable refuge chamber. This paper proposes a kind of dynamic compensation method for the temperature sensors by using extended...
2011 / Shuncai Yao, Rule Gao -
Team design communication patterns in e-learning design and development2013 / Chrysi Rapanta, Marcelo Maina, Nicole Lotz, Alberto Bacchelli
-
A Novel Scheme for DVL-Aided SINS In-Motion Alignment Using UKF Techniques2013 / Wanli Li, Jinling Wang, Liangqing Lu, Wenqi Wu
-
Analysis of the Accuracy and Robustness of the Leap Motion Controller2013 / Frank Weichert, Daniel Bachmann, Bartholomäus Rudak, Denis Fisseler
-
Tribological Properties of Ultrasonic Vibration Assisted Milling Aluminium Alloy Surfaces
Abstract Kinematics analysis of tool-tip in milling process with ultrasonic vibration in feed direction was conducted. Ultrasonic vibration assisted milling (UVAM) aluminium alloy experiments were designed to investigate the morphologies of machined ...
2013 / D. Xing, J. Zhang, X. Shen, Y. Zhao, T. Wang -
Gravity compensation in accelerometer measurements for robot navigation on inclined surfaces
Abstract Accelerometers are used in most robot navigation systems as sensors for robot speed and localization. Normally, these accelerometers sense the body acceleration, which is integrated to determine the robot velocity, and cumulatively the...
2011 / Jonathan R. Nistler, Majura F. Selekwa -
Selection of working area for industrial engineering students
Abstract Selection of working area is one of the most important turning points in the human life. The main purpose of the selection of working area is planning a happy and successful future. There are many factors that interact with one another in...
2012 / Babak Daneshvar Rouyendegh, Gulin Feryal Can -
Positive and Negative Effects on Energy Consumption by Inter–heating of Stripper in Co2 Capture Plant
Abstract The effect of heat distribution or inter-heating on the total energy requirement for CO2 stripping is investigated. Here we look at retrofit design of an existing column. It means the height and diameter of the stripper is given. The...
2012 / Mehdi Karimi, Magne Hillestad, Hallvard F. Svendsen -
Study on multiphase flow field of gas transportation in drivage face
Abstract Based on theories of multiphase fluid mechanics, the gas transportation and concentration distribution in drivage face were studied in this paper. According to gas transportation characteristics in drivage working face, reasonable...
2009 / Guo Chu-wen, Wu Nan-nan, Xia Shuang -
Modeling and Distributed Implementation of Synchronization and Coordination in Multi-Robot Systems
Abstract This paper deals with control system design and implementation problems encountered in multiple robot systems. A systematic method of constructing hierarchical net models is described for their direct implementation such that the net is...
2012 / Gen’ichi Yasuda -
Balancing With the Presence of a Rub
Abstract During commissioning of a cogeneration plant the air cooled generator can not be run up to synchronization speed because of high 1X vibration during startup. Several attempts were done by the commissioning team to balance the rotor but...
2012 / Nicolas Peton