Mechanical engineering topic list of research papers
-
Inline Process Metrology System for the Control of Laser Surface Structuring Processes
Abstract Laser surface structuring is a rapidly developing manufacturing technology. This technology offers a high level of flexibility regarding the geometrical design and a wide range of machinable materials. However, current systems used for...
2012 / Robert Schmitt, Guilherme Mallmann, Kai Winands, Mario Pothen -
Modelling of the workpiece geometry effects on Ti–6Al–4V linear friction welds
Abstract Linear friction welding (LFW) is a solid-state joining process that is finding increasing interest from industry for the fabrication of titanium alloy (Ti–6Al–4V) preforms. Currently, the effects of the workpiece geometry on the thermal...
2015 / Anthony R. McAndrew, Paul A. Colegrove, Adrian C. Addison, Bertrand C.D. Flipo, Michael J. Russell, et al. -
Multi-objective optimization approach for cost management during product design at the conceptual phase2014 / K. G. Durga Prasad, K. Venkata Subbaiah, K. Narayana Rao
-
Numerical Research on The Nozzle Damping Effect by A Wave Attenuation Method
Abstract Nozzle damping is one of the most important factors in the suppression of combustion instability in solid rocket motors. For an engineering solid rocket motor that experiences combustion instability at the end of burning, a wave attenuation ...
2013 / Wan-xing Su, Ning-fei Wang, Jun-wei Li, Yan-dong Zhao, Mi Yan -
Analytical solution of fractional Navier–Stokes equation by using modified Laplace decomposition method
Abstract The aim of this article is to introduce a new analytical and approximate technique to obtain the solution of time-fractional Navier–Stokes equation in a tube. This proposed technique is the coupling of Adomian decomposition method (ADM) and ...
2014 / Sunil Kumar, Deepak Kumar, Saeid Abbasbandy, M.M. Rashidi -
Parametric analysis of wheel wear in high-speed vehicles2014 / Na Wu, Jing Zeng
-
Slug Flow-Heat Transfer in Parallel Plate Microchannel Including Slip Effects and Axial Conduction
Abstract In this paper the forced convection with slug flow model in parallel plate microchannel is studied. In the slug flow model, it is assumed that the velocity of the fluid is uniform across any cross-section perpendicular to the axis of the...
2013 / Mourad Mecili, El Hacene Mezaache -
Practical Implementation for the interval type-2 fuzzy PID controller using a low cost microcontroller
Abstract In this study, we propose an embedded real-time interval type-2 fuzzy proportional – integral – derivative (IT2F-PID) controller which is a parallel combination of the interval type-2 fuzzy proportional – integral (IT2F-PI) controller and...
2014 / Ahmad M. El-Nagar, Mohammad El-Bardini -
A spongy icing model for aircraft icing
Abstract Researches have indicated that impinging droplets can be entrapped as liquid in the ice matrix and the temperature of accreting ice surface is below the freezing point. When liquid entrapment by ice matrix happens, this kind of ice is...
2013 / Xin Li, Junqiang Bai, Jun Hua, Kun Wang, Yang Zhang -
Collision Avoidance of Cooperative Dual Redundant Manipulators
Abstract Dual redundant manipulators are extremely useful for tasks in dangerous or space environments, but efficient and real-time coordinated control is hard to achieve. Collision avoidance between two cooperative manipulators is vital to the...
2011 / Qiang ZHAN, Yan-hui HE, Ming CHEN -
Aerodynamic Design for Three- Dimensional Multi- lifting Surfaces at Transonic Flow
Abstract An aerodynamic design method and corresponding codes are developed for three dimensional multi-lifting surfaces at transonic flow. It is based on the “iterative residual correction” concept that is successfully used for transonic wing...
2011 / Qing-zhen YANG, Zhong-yin ZHANG, Streit Thomas, Wichmann Georg, Yong ZHENG -
Effect of Pilot Fuel Quantity on the Performance and Emission of a Dual Producer Gas–Diesel Engine
Abstract Quantity of pilot fuel is an important parameter for controlling the combustion process in a dual fuel engine. However, very few researches have investigated this effect in details in a dual producer gas-diesel engine. In this study, the...
2013 / Pisarn Sombatwong, Prachasanti Thaiyasuit, Kulachate Pianthong -
Second-law analysis of fluid flow over an isothermal moving wedge
Abstract In this study, entropy generation minimization (EGM) was employed to optimize fluid flow and heat transfer over a moving wedge. Governing partial differential equations including continuity, momentum and energy are reduced to ordinary ones...
2014 / F. Hedayati, A. Malvandi, D.D. Ganji -
Design Method of Equipment Optimization Development Based on Standardization Theory
Abstract The matters of equipment optimization development are usually discrete, fuzzy and non-quantitative. It is difficult directly to optimize the equipment development with a mathematical model. A set of methods for designing the equipment...
2013 / Lv-bo Mai -
Design and Realization of a Solar Adsorption Refrigeration Machine Powered by Solar Energy
Abstract This work aims to the experimental realization of a refrigerator prototype that uses an adsorption tube collector for cooling, in which solar energy can be directly absorbed. The development of a software giving an estimate of the activated ...
2014 / Mohand Berdja, Brahim Abbad, Ferhat Yahi, Fateh Bouzefour, Maamar Ouali -
The Method of Disturbances Analysis on the Hydromechanical Constant Speed Drive
Abstract Constant speed drive are stabilizing systems, and in such systems the reference signal is constant, and the main operating mode of these systems is aimed at eliminating or reducing errors caused by disturbances. In this work the author has...
2014 / Maxim Mikhaylov, Sergey Stazhkov, Vladimir Cvetkov -
Numerical simulation of a hydrocarbon fuelled valveless pulsejet
Abstract Jet propulsion technology has been limited to being identified largely with turbojets and turbo-machinery driven jet engines. Of late there has been a renewed interest in pulsejet technology and it has once again caught the imagination of...
2014 / Joseph Kalyan Raj Isac, Logu Mohanraj, Enumula Srikar Sai, Vijay Kumar Kannan -
Stress in the surface layer of objects burnished after milling2014 / Daniel Grochała, Stefan Berczyński, Zenon Grządziel
-
Multiscale Microstructures and Microstructural Effects on the Reliability of Microbumps in Three-Dimensional Integration2013 / Zhiheng Huang, Hua Xiong, Zhiyong Wu, Paul Conway, Frank Altmann
-
Who Sits Where? Infrastructure-Free In-Vehicle Cooperative Positioning via Smartphones2014 / Zongjian He, Jiannong Cao, Xuefeng Liu, Shaojie Tang