Mechanical engineering topic list of research papers
-
Thermal performance of the chilled water spirally coiled finned tube in cross flow for air conditioning applications
Abstract The thermal performance of spirally coiled finned tube in cross flow was investigated experimentally. The effects of curvature ratio, flow direction, fin pitch and flow rate of chilled water and air on thermal characteristics of spirally...
2012 / Abdalla Gomaa, Wael I.A. Aly, Ashraf Mimi Elsaid, Eldesuki I. Eid -
The Research on Fuzzy PID Control of the Permanent Magnet Linear Synchronous Motor
Abstract Based on analyzing mathematical mode of the permanent magnet linear synchronous motor (PMLSM), three-closed-loop control system is presented in this paper. Combined the advantages of traditional PID control algorithm and fuzzy control...
2012 / Ying Wu, Hang Jiang, Min Zou -
Early disparity estimation skipping for multi-view video coding2012 / Jungdong Seo, Kwanhoon Sohn
-
Influence of Steam Recovery and Consumption on Energy Consumption per Ton of Steel
Abstract Steam recovery and consumption contributes greatly to energy consumption per ton of steel. It is studied in this paper that the relationship between energy consumption per ton of steel and steam recovery & consumption, including main...
2012 / Guangyu Ma, Jiuju Cai, Lihong Zhang, Wenqiang Sun -
Scheme Design and Analysis of Variable Condition of Evaporative Condenser for Steam Condensing of Steam Feeding Water Pump for 1000MW Air-cooled Unit
Abstract Evaporative condenser for steam condensing of mini-turbine of steam feeding water pump for 1000 MW air-cooled unit is designed. Variable working condition is analyzed based on the reverse flow between steam and air. The results show that...
2012 / Gaosheng Wei, Jingqiu Ren, Wenpeng Hong -
Experimental Study on Tilted Planetary Motion Drilling for CFRP
Abstract The study deals with a proposal and experimental study on the tilted planetary motion drilling for CFRP. The authors have modified cutting mechanism principle of the orbital drilling, which named as the tilted planetary motion drilling. Its ...
2012 / Hidetake Tanaka, Kazuki Ohta, Ryo Takizawa, Kazuhisa Yanagi -
3D Circular Interpolation Motion Equivalent to Cone-Frustum Cutting in Five-Axis Machining Centers and its Sensitivity Analysis
Abstract The present paper describes a testing method for five-axis machining centers using three-dimensional circular interpolation movement equivalent to cone-frustum cutting. In the present paper, the test conditions, such as the half apex angle...
2012 / Noriyuki Kato, Ryuta Sato, Masaomi Tsutsumi -
The Research and Practice of Ecological Safety Evaluation Methods(I) Evaluation Index and Model
Abstract According to the ecological security system being fuzzy, we make use of AHP to determine the weight of evaluation index on the basis of the relevant historical data and unique geographical climate characteristics of the petrochemical area....
2012 / Li Hongwei, Lv Mou, Ye Song -
Automatic generation of equations of motion for multibody system in discrete event simulation framework
Abstract In this paper, the development of a simulation program that can automatically generate equations of motion for mutibody systems in the discrete event simulation framework is presented. The need to analyze the dynamic response of mechanical...
2012 / Namkug Ku, Ara Jo, Sol Ha, Myung-Il Rho, Kyu-Yeul Lee -
The Research of Cooling Load and Cooling Capacity Calculation Methods of Spinning Workshop
Abstract This article takes a spinning workshop of Xi’an region in summer as an example, calculated and contrasted each part cooling load of spinning workshop by using cooling load coefficient method and steady calculation method, it comes to a...
2012 / Yan Suqian, Liu Jiaping, Ge Xiangrong, Huang Xiang -
Geometry Design of a Mixed Flow Pump Using Experimental Results of on Internal Impeller Flow
Abstract A subject of this paper is a numerical solution of a mixed -flow pump geometry with respect to a distribution of a static pressure in the channel of the pump. The distributions of pressure and velocity fields were obtained through...
2012 / Michal Varchola, Peter Hlbocan -
Vehicle Path Tracking Using Future Prediction Steering Control
Abstract Trajectory tracking is one of the important aspect in autonomous vehicle. Therefore, this paper proposed a stable tracking control for autonomous vehicle. An approach that consists of steering wheel control and lateral control is...
2012 / Muhammad Aizzat Zakaria, Hairi Zamzuri, Saiful Amri Mazlan, Sheikh Muhammad Hafiz Fahami Zainal -
From superhydrophobicity to icephobicity: forces and interaction analysis2013 / Vahid Hejazi, Konstantin Sobolev, Michael Nosonovsky
-
Computer Aided Education in Random Filed Engineering by Application of Mathematical Tool
Abstract MATLAB is a power tool in mathematical filed, and has been widely applied in education engineering. In the present paper, MATLAB is used to describe algorithms for the generation of pseudorandom numbers with both uniform and normal...
2012 / Jianwei Yu, Yuhong Yang -
A Detection Method of Traffic Parameters Based on EPI
Abstract It is a key segment of the traffic management system about detecting traffic parameters. With the continuous development of computer vision, the video traffic detection method is paid more and more attention. For comprehensive utilization...
2012 / T.M. Deng, B. Li -
Use of land’s cooperative object to estimate UAV’s pose for autonomous landing
Abstract The research of unmanned aerial vehicles’ (UAVs’) autonomy navigation and landing guidance with computer vision has important significance. However, because of the image blurring, the position of the cooperative points cannot be obtained...
2013 / Guili Xu, Xiaopeng Qi, Qinghua Zeng, Yupeng Tian, Ruipeng Guo, et al. -
Modeling Maintenance Effect with Failure-Counting
Abstract The assessment and modeling of the maintenance effect is an active research topic. In this paper, we proposed a failure- counting-based maintenance effect assessment model (abbreviated as FCME). Specifically speaking, this model assumes...
2013 / Yu Zhou, Gang Kou, Daji Ergu -
Multidimensional Modeling of Direct Injection Diesel Engine with Split Multiple Stage Fuel Injections
Abstract In the present study, an attempt has been made to predict the influence of split multiple stage fuel injection on a DI diesel engine performance and emission characteristics. The predictions have been made for both conventional continuous...
2013 / Subhash Deo Hiwase, S. Moorthy, Hari Prasad, Mahendra Dumpa, Rajesh M. Metkar -
Optimization and Design of LCD Diffuser Plate with Micro-Semisphere Structure
Abstract The diffuser plate is the key component of the direct type LED backlight module. The optimization and design of the micro-structures on the surface of the diffuser plate are the critical factors in manufacturing diffuser plate of good...
2011 / Liu Mingyan, Wu Daming, Zhang Yajun, Zhuang Jian -
Non-Traditional Cell Geometry for Improved Copper Plating Uniformity2016 / Holly Garich, Sirivatch Shimpalee, Visarn Lilavivat, Stephen Snyder, E. J. Taylor