Mechanical engineering topic list of research papers
-
Optical path difference behind of spectacular game of light
Abstract This work reports, in a general frame concerning the scientific explanations of wonderful effects from the daily life, on the physical basis behind the colorful images observed at the surface of various transparent films. Accordingly, a...
2011 / C. Kuncser, A. Kuncser, S. Antohe -
Multi-Objective Aerodynamic Optimization Design Method of Compressor Rotor Based on Isight
Abstract In order to achieving the multi-objective optimization of the compressor rotor blade, a hybrid optimization design algorithm was proposed. The algorithm included three parts: the design of experiment technology was applied to reduce the...
2011 / Wei Wang, Rong Mo, Yan Zhang -
Gear Shifting Behavior Model for Ecodriving Simulations Based on Experimental Data
Abstract Ecodriving is known as a way to quickly and efficiently reduce fuel consumption for the concerned ecodriven vehicle. However, the impact of ecodriving on a whole road network at a large scale is unknown. In order to perform studies in a...
2012 / Olivier Orfila, Guillaume Saint Pierre, Cindie Andrieu -
Passing Maneuver: Models, Surveys and Simulation
Abstract Head-on collisions cause more serious consequences of some types of accidents. These collisions are often due to an error of passing maneuver, on two-lane highways. The latest Italian official statistics for the year 2010 (ACI, 2011b)...
2012 / Francesco Saverio Capaldo, Luigi Risoli -
A Four-Quadrant PVDF Transducer for Surface Acoustic Wave Detection2012 / Zimo Lu, Dante J. Dorantes-Gonzalez, Kun Chen, Fei Yang, Baoyin Jin, et al.
-
Panel/full-span free-wake coupled method for unsteady aerodynamics of helicopter rotor blade
Abstract A full-span free-wake method is coupled with an unsteady panel method to accurately predict the unsteady aerodynamics of helicopter rotor blades in hover and forward flight. The unsteady potential-based panel method is used to consider...
2013 / Jianfeng Tan, Haowen Wang -
Study on Suitability and Safety of Parallel Flow Heat Exchanger in Dry Condition
Abstract Stating heat transfer and fluid flow characteristics of parallel flow heat exchanger used as evaporator, analyzing its difference of working in dry condition and the existing problems. Then compare with conventional finned-tube heat...
2013 / Li Zhou, Qing-qing Pei -
Performance assessment of simple and modified cycle turboshaft gas turbines
Abstract This paper focuses on investigations encompassing comparative assessment of gas turbine cycle options. More specifically, investigation was carried out of technical performance of turboshaft engine cycles based on existing simple cycle (SC) ...
2013 / Barinyima Nkoi, Pericles Pilidis, Theoklis Nikolaidis -
State-Space Model of a Mechanical System in MATLAB/Simulink
Abstract This paper describes solution of the equations of motion of the mechanical system by using State-Space blocks in MATLAB/Simulink. It deals with the mechanical system with two degrees of freedom. State-Space block solution is compared with...
2012 / Peter Sivák, Darina Hroncová -
Research of Experimental Simulation on Aerodynamic Character for Typed Iced Conductor
Abstract The dynamics force of iced-conductor is the driving force of conductor galloping; its variation is depended on the aerodynamic character of iced conductor. The aerodynamic character of iced conductor is the key factor of galloping of...
2012 / Li Xinmin, Zhu Kuanjun, Liu Bin -
Study on the fuzzy analytic hierarchy integrated evaluation method of Eco-Industrial Parks
Abstract With an escalating conflict between economic growth and environment, eco-industrial parks’ evaluation gradually becomes a hot topic in the academic field. On the basis of previous research, this article built up the evaluation index system...
2011 / Zhang Hui -
From neural network to neuro-fuzzy modeling: Applications to the carbon dioxide capture process
Abstract Research on improving efficiency of the amine-based post combustion carbon dioxide (CO2) capture process has been ongoing during the past decade. A good understanding of the intricate relationships among parameters involved in the CO2...
2011 / Qing Zhou, Yuxiang Wu, Christine W. Chan, Paitoon Tontiwachwuthikul -
Temperature Field Analysis for PZT Pyroelectric Cells for Thermal Energy Harvesting2011 / Chun-Ching Hsiao, Jing-Chih Ciou, An-Shen Siao, Chi-Yuan Lee
-
Analysis of the Air Flow Generated by an Air-Assisted Sprayer Equipped with Two Axial Fans Using a 3D Sonic Anemometer2012 / F. Javier García-Ramos, Mariano Vidal, Antonio Boné, Hugo Malón, Javier Aguirre
-
Technical Barriers and Development of Cu Wirebonding in Nanoelectronics Device Packaging2012 / C. L. Gan, E. K. Ng, B. L. Chan, U. Hashim, F. C. Classe
-
Prediction of Microporosity in Complex Thin-Wall Castings with the Dimensionless Niyama Criterion2013 / Maodong Kang, Haiyan Gao, Jun Wang, Lishibao Ling, Baode Sun
-
Multidiscipline Topology Optimization of Stiffened Plate/Shell Structures Inspired by Growth Mechanisms of Leaf Veins in Nature2013 / Baotong Li, Jun Hong, Suna Yan, Zhifeng Liu
-
Guided Wave and Damage Detection in Composite Laminates Using Different Fiber Optic Sensors2009 / Fucai Li, Hideaki Murayama, Kazuro Kageyama, Takehiro Shirai
-
UCAV Path Planning by Fitness-Scaling Adaptive Chaotic Particle Swarm Optimization2013 / Yudong Zhang, Lenan Wu, Shuihua Wang
-
Real-Time Curvature Defect Detection on Outer Surfaces Using Best-Fit Polynomial Interpolation2012 / Ehsan Golkar, Anton Prabuwono, Ahmed Patel