Mechanical engineering topic list of research papers
-
Development and Verification of the Tire/Road Friction Estimation Algorithm for Antilock Braking System2014 / Jian Zhao, Jin Zhang, Bing Zhu
-
Reliability design optimization of composite structures based on PSO together with FEA
Abstract The present work aims to develop a method for reliability-based optimum design of composite structures. A procedure combining particle swarm optimization (PSO) and finite element analysis (FEA) has been proposed. Numerical examples for the...
2013 / Jianqiao Chen, Yuanfu Tang, Rui Ge, Qunli An, Xiwei Guo -
A solving method for nonlinear equations in the flow field
Abstract In this paper, according to the mathematical model of the hydraulic step system in the flow field, the second-order nonlinear differential equations describing the step body movement are linearized by the local segmenting method, and then...
2012 / Chengli Zhang, Yun Zeng -
Simulation on Mine Water-inrush Characteristics of Cross Roadway Based on CFX
Abstract Mine water-inrush obeys Navier-Stokes’ turbulence flow in roadway. By tracking free surface of the air-water interface, the process of water flowing can be displayed. Transient simulations of mine water-inrush in 25s are performed...
2011 / Wang Qin, Ye Yicheng, Jiang Ying -
Finite element formulation for the free vibration analysis of embedded double-walled carbon nanotubes based on nonlocal Timoshenko beam theory2013 / Milad Hemmatnezhad, Reza Ansari
-
Multiaxis interferometric displacement measurement for local probe microscopy2011 / Josef Lazar, Jan Hrabina, Mojmír Šerý, Petr Klapetek, Ondřej Číp
-
Second Law Analysis of a non-Newtonian Laminar Falling Liquid Film Along an Inclined Heated Plate2008 / Rama Subba Reddy Gorla, David M. Pratt
-
Research on Reusable Design Information of Shoes Based on CBR
Abstract A way of reusing and retrieving design information of shoes using case based reasoning (CBR) in area of knowledge based engineering was presented, and a new system for reusing design information had been created. The system and CBR...
2012 / SHI Li-xia, PENG Wen-li, ZHANG Wen-ni -
Hydrogen Oxygen Steam Generator Integrating with Renewable Energy Resource for Electricity Generation
Abstract Renewable hydrogen energy system produces oxygen as by product from water electrolysis process, the produced oxygen is vented out to the surrounding and not utilized. Hydrogen combustion with a stoichiometric ratio of pure oxygen produces...
2012 / Saif A. Alabbadi -
Modelling and control optimization of a solar desiccant and evaporative cooling system using an electrical heat pump
Abstract The aim of this work is the control optimization of a new solar assisted air-conditioning concept which combines a desiccant and evaporative cooling (DEC) system with an electrical heat pump. The DEC air handling unit configuration had to...
2012 / Marcello Aprile, Rossano Scoccia, Mario Motta -
Fault Diagnosis of Gas Turbine based on Fuzzy Matrix and the Principle of Maximum Membership Degree
Abstract This paper presents the method of building gas turbine fault diagnosis fuzzy mathematical model and establishes fuzzy diagnosis matrix R between fault causations and symptoms. Using fuzzy matrix and the principle of maximum membership...
2012 / Xiong-fei Zhao, Yong-bao Liu, Xing He -
Simulation and Experimental Studies on Perfect Tracking Optimal Control of an Electrohydraulic Actuator System2012 / R. Ghazali, Y. M. Sam, M. F. Rahmat, Zulfatman, A. W. I. M. Hashim
-
Experimental study on green electrical discharge machining in tap water of Ti–6Al–4V and parameters optimization2013 / L. Tang, Y. T. Du
-
Based on the Fuzzy Set-valued Statistics and the Fuzzy Mathematics Theory in Air Traffic Control System Safety Appraisal Application
Abstract Elaborated carries on the safety evaluation to the air traffic control system the important meaning .First, the person-equipment- environment- management system management model takes the instruction based on the systems engineering theory, ...
2012 / Zhang Zhaoning, Meng Na, Zhou Peng -
Vibration Assisted EDM of Small-hole Using Voice Coil Motor
Abstract A vibration platform for small-hole EDM based on voice coil motor was developed. The vibration platform is capable of avoiding the easy loss of vibration energy and the heat effect in ultrasonic vibration. The dynamic performance of the...
2012 / Yi Jiang, Wansheng Zhao, Xuecheng Xi, Xiaoming Kang, Lin Gu -
Factors of unpredictable shots concerning new soccer balls
Abstract The configuration of new soccer balls has closely approached a perfect round shape by not only reducing the number of panels but also by eliminating roughness of the panel joints by utilizing thermal bonding process recently. Therefore, in...
2012 / Shinichiro Ito, Masaharu Kamata, Takeshi Asai, Kazuya Seo -
A Numerical Analysis of the Temperature Distributions in Face Sealing Rings
Abstract Simulation tests were conducted to establish the influence of the operational parameters on the distributions of temperature in the sealing rings and the fluid film. A mathematical model was developed for a non-contacting face seal. It...
2012 / Sławomir Błasiak, Czesław Kundera, Jerzy Bochnia -
Aerodynamic drag measurement of American footballs
Abstract The flight trajectory of an American football largely depends on its aerodynamic characteristics. Despite the popularity of the game, it appears that little information on the aerodynamic force experienced by an American football,...
2012 / Firoz Alam, Sean Smith, Harun Chowdhury, Hazim Moria -
Machining of Difficult-to-Cut-Alloys Using Rotary Turning Tools
Abstract The importance and use of high temperature metals, such as titanium and nickel alloys, in aerospace industries have been continuously increasing due to their high strength-to-weight properties. These superior mechanical properties, however, ...
2013 / Utku Olgun, Erhan Budak -
Key Technologies of EV Motor Drive System Design
Abstract For pure Electric Vehicle (EV), motor is the one and only power source. Comparing with industry motor, the motor drive system in EV has several challenges, such as dynamic running with unpredicted drive cycle, high torque/power density to...
2011 / Cai Chi-lan, Wang Xiao-gang, Bai Yue-wei, Xia Yan-chun, Liu Kai