Mechanical engineering topic list of research papers
-
Method of Humanity Design for Numerical Control Machine Tool
Abstract In view of the humanity design problem of the existing numerical control machine tool, the author states her own personal design idea. So the author makes an exploration on method of humanity design for components of numerical control...
2012 / Xiaowei Jiang, Xianchun Cheng -
Innovative model to priority distributed generation technology
Abstract Most important factor in life and existence of material is energy which called life essence. One of the vital energies in human life is Electricity that produces by distributed generation currently. Nowadays, the demand for consuming...
2012 / Nikzad Manteghi, Mohmmad Jafar Haddadpour Jahromi -
Testing and Analysis of Thermal Performance of Ground Source Heat Pump System
Abstract Combining testing data, analyses some main problems existed in the application of ground-source heat pump (GSHP) technique through testing and assessing on thermal performance of typical GSHP system in winter conditions. Presents some...
2012 / Qu Shilin, Ge Xu Liu Yimin, Yu Qian -
Numerical Research of Aerodynamic Characteristics of Combustion Chamber BKZ-75 Mining Thermal Power Station
Abstract There were researched processes of heat mass transfer by burning of pulverized coal on the sample of combustion chamber BKZ-75 of Shahtinsk TPS by using of 3D Modeling technologies on the basis of differential equation solution of turbulent ...
2012 / A.S. Askarova, S.A. Bolegenova, V. Yu. Maksimov, A. Bekmuhamet, Sh. S. Ospanova -
A Monocular Vision-based Specific Person Detection System for Mobile Robot Applications
Abstract The availability and low price of single camera makes them an attractive sensor to develop more sophisticated applications in the field of robotic system. Person detection and tracking systems are important capabilities for applications as...
2012 / Mohd Nazri Abu Bakar, Abdul Rahman Mohd. Saad -
New Structured Illumination Technique for the Inspection of High-Reflective Surfaces: Application for the Detection of Structural Defects without any Calibration Procedures2008 / Yannick Caulier, Klaus Spinnler, Salah Bourennane, Thomas Wittenberg
-
Large Eddy Simulation and PIV Measurements of Unsteady Premixed Flames Accelerated by Obstacles2009 / V. Di Sarli, A. Di Benedetto, G. Russo, S. Jarvis, E. J. Long, et al.
-
Study of Management Information System of Railway Permanent Way Safety Risks and Comprehensive Evaluation
Abstract The safety of railway permanent way is what the railway department highly concern about, railway permanent way department is one of the most important departments, it manages all railway infrastructure, railway infrastructure's good...
2011 / Chaolong Jia, Weixiang Xu, Hanning Wang -
Back-Stepping and Neural Network Control of a Mobile Robot for Curved Weld Seam Tracking
Abstract This paper proposes a back-stepping and neural network hybrid control method for mobile platform and slider of mobile robot used in shipbuilding welding. The kinematics model of the robot is built firstly, and then a motion controller is...
2011 / Gao Yanfeng, Zhang Hua, Ye Yanhui -
Comparative Evaluation of Various Strategies for Improving the Characteristics of Performance of a Pilot Ignited Natural Gas/Diesel Engine
Abstract Automotive engineers have proposed various solutions towards the simultaneous reduction of NO and soot emissions from direct injection compression ignition engines, one of which is the use of “natural gas/diesel dual-fuel engines”. Natural...
2012 / Roussos G. Papagiannakis, Dimitrios T. Hountalas -
Evaluating k–∈ with One–equation Turbulence Model
Abstract An extended version of the isotropic one–equation model is proposed to account for the dis- tinct effects of low-Reynolds number (LRN) and wall proximity. The turbulent kinetic energy k and the dissipation rate ∈ are evaluated using the...
2013 / M.M. Rahman, A. Meriläinen, A.K.M. Sadrul Islam, M.J. Lampinen -
Prospective science teachers’ understanding of sound
Abstract The goal of this study is to describe prospective science teachers’ (PST) conceptions about basic sound phenomena and concepts. The study was conducted on 56 PSTs. The questionnaire that is used as data collection instrument consists of 3...
2009 / Asuman Küçüközer -
A human robot interaction application for robotic education
Abstract The aim of the robotic education is to make the students know the elements of robot and to enhance their abilities on planning applications by using the robot applications and more for experiencing the existing mechanic construction. ...
2009 / Mehmet Tekerek -
Sustainability in bridge construction processes2009 / Pedro Pacheco, António P. Adão da Fonseca, André Resende, Rui Campos
-
Dynamical flow measurements in hydraulic systems using a polymer-based micro flow sensor
Abstract We present a dynamical flow sensor for the condition monitoring of hydraulic systems using a micro flow sensor from polymer. The micro flow sensor is based on the thermal anemometric principle. A thin Polyimide membrane is used as a support ...
2009 / Ralf Ahrens, Manfred Festa -
Design and analysis of spiral bevel gears with seventh-order function of transmission error
Abstract This paper proposes a new approach to design and implement a seventh-order polynomial function of transmission error (TE) for spiral bevel gears with an aim to reduce the running vibration and noise of gear drive and improve the loaded...
2013 / Jinzhan Su, Zongde Fang, Xiangwei Cai -
Cutting Forces Calculation and Experimental Measurement for 5-axis Ball End Milling
Abstract Calculation technique for cutting forces prediction in 5-axis ball end milling is worked out and realized as computational program. The curvilinear cutting edge is divided into small segments, and the path for each segment is defined. The...
2013 / S. Bolsunovsky, V. Vermel, G. Gubanov -
The Application of EASY5 Software to Simulate the Operating Characteristics of Parallel-Flow Condensing Unit
Abstract Microchannel heat exchanger has become a hot issue at present, while it is rarely used in the field of industrial cooling and air conditioning. This paper took the dynamic simulation of parallel-flow condensing unit as an example, mainly...
2011 / Yixiong Hu, Jing Su, Zicheng Yan -
Fatigue life of double row slewing ball bearing with irregular geometry
Abstract Standard procedure for bearing life calculation, as described in standard ISO281:2008, was developed for standard, rather small axial or thrust rolling bearings. Since the geometry and manufacturing procedures of large rolling slewing...
2010 / Rok Potočnik, Peter Göncz, Jože Flašker, Srečko Glodež -
Study on Vehicle Track Model in Road Curved Section Based on Vehicle Dynamic Characteristics2012 / Ren Yuan-Yuan, Zhao Hong-Wei, Li Xian-Sheng, Zheng Xue-Lian