Mechanical engineering topic list of research papers
-
Driver Behavior on Combination of Vertical and Horizontal Curves of Mountainous Freeways2014 / Tao Chen, Miao Zhang, Lang Wei
-
Energy Flow Chart-Based Energy Efficiency Analysis of a Range-Extended Electric Bus2014 / Xiaogang Wu, Chen Hu, Jingfu Chen
-
Sensitivity Analysis of Deviation Source for Fast Assembly Precision Optimization2014 / Jianjun Tang, Xitian Tian, Junhao Geng
-
Robust Switching Control Strategy for a Transmission System with Unknown Backlash2014 / Qiang Ling, Zhe Yan, Honghai Shen, Jiquan Li, Yongyang Wang
-
Optimization of Natural Frequencies and Sound Power of Beams Using Functionally Graded Material2014 / Nabeel T. Alshabatat, Koorosh Naghshineh
-
Optimal Operation Method for Microgrid with Wind/PV/Diesel Generator/Battery and Desalination2014 / Qingfeng Tang, Nian Liu, Jianhua Zhang
-
Investigation of Elastic Energy on Single Crystal GaN Nanobeams with Different Span2014 / Shang-Chao Hung, Cheng-Fu Yang, Yi-Cheng Hsu
-
Sintering Behavior and Mechanical Properties of Biphasic Calcium Phosphate Ceramics2014 / Mehmet Yetmez
-
Modelling of shear localization in solids by means of energy relaxation2014 / Tuyet B Trinh, Klaus Hackl
-
A survey on motion prediction and risk assessment for intelligent vehicles2014 / Stéphanie Lefèvre, Dizan Vasquez, Christian Laugier
-
Remote control system of disaster response robot with passive sub-crawlers considering falling down avoidance2014 / Soichiro Suzuki, Satoshi Hasegawa, Masayuki Okugawa
-
Usability of arc types in industrial welding2014 / Paul Kah, Hamidreza Latifi, Raimo Suoranta, Jukka Martikainen, Markku Pirinen
-
Design of Low-Noise Centrifugal Fan for Motorized Spindle Cooling System
Abstract The mechanism of the effect of speed variance in impeller inlet on aerodynamic noise is analyzed in this paper. The fine structure of speed flow field in the blade channel is shown by the means of numeric simulation. The blade profile is...
2011 / Shenbo Yu, Jun Li -
The Application of Image Processing Technology On Brick-carved Image Recognition
Abstract Computers can not determine the exact size of the edge simply according to a bitmap image of the brick-carved to be processed, making it difficult to set up a three-dimensional digital model. To solve this problem, we proposed to process...
2011 / Cui-ming Li, Ping Yang, Qi-chao Wang, Shu-zhen Zhang -
Marangoni Convection during Free Electron Laser Nitriding of Titanium2009 / Daniel Höche, Sven Müller, Gerd Rapin, Michelle Shinn, Elvira Remdt, et al.
-
Performance analysis and working fluid selection for geothermal energy-powered organic Rankine-vapor compression air conditioning2013 / Xianbiao Bu, Lingbao Wang, Huashan Li
-
Analysis of the Performance of a GAX Hybrid (Solar - LPG) Absorption Refrigeration System Operating with Temperatures from Solar Heating Sources
Abstract This paper presents the analysis of the experimental tests performed with an absorption refrigeration advanced Solar-GAX system, designed for 10.5kW (3 Ton) of cooling using ammonia-water mixture. The system designed for operation at heat...
2012 / Mario A. Barrera, Roberto Best, Victor H. Gómez, Octavio García- Valladares, Nicolaz Velázquez, et al. -
Finite Element-based Modeling of Machining-induced Residual Stresses in Ti-6Al-4V under Finish Turning Conditions
Abstract Residual stresses (RS) imparted during the finishing stages of machining constitute an essential measure of surface integrity and an acceptance criterion for the safety of critical aerospace parts. To build a predictive tool for...
2013 / E. Abboud, B. Shi, H. Attia, V. Thomson, Y. Mebrahtu -
An energy concept for macroscopic traffic flow modelling2012 / Abdelaziz Nakrachi, Said Hayat, Dumitru Popescu
-
Feedback control for form-drag reduction on a bluff body with a blunt trailing edge2012 / Jeremy A. Dahan, A. S. Morgans, S. Lardeau