Mechanical engineering topic list of research papers
-
Flue Gas Concentrations and Efficiencies of a Coal-fired Oxyfuel Power Plant with Circulating Fluidised Bed Combustion
Abstract In contrast to an Oxyfuel process with pulverised coal (PC) firing, possible advantages of a circulating fluidised bed combustion (CFBC) are the in-furnace sulphur dioxide removal no additional sulphur dioxide removal downstream the steam...
2013 / Matthias Weng, Claas Günther, Alfons Kather -
Pre-lift Valve Actuation Strategy for the Performance Improvement of a DISI VVA Turbocharged Engine
Abstract Modern internal combustion engines (ICEs) are becoming more and more complex in order to achieve not only better power and torque performance, but also to respect the pollutant emissions and the fuel consumption (CO2) limits. ...
2014 / Bozza Fabio, De Bellis Vincenzo, De Masi Valentino, Gimelli Alfredo, Muccillo Massimiliano -
Influence of Outdoor Air Conditions on the Air Source Heat Pumps Performance
Abstract The purpose of the present work is the investigation of the effect of the outdoor air temperature and relative humidity on the performance of an air heat pump, when the reverse-cycle defrosting is considered. The frost formation process has ...
2014 / Pamela Vocale, Gian Luca Morini, Marco Spiga -
Experimental Study of the Injection System for CO2 Geologic Storage Demonstration
Abstract The worldwide issue of greenhouse gas reduction has recently drawn great attention to carbon capture and storage (CCS). Almost CCS studies have been focused in the capture technology of carbon dioxide and the geological investigation for...
2013 / Seok Ho Yoon, Kong Hoon Lee, Jungho Lee, Young Kim, Byoung-Woo Yum -
Modeling and Simulation of Series DC Motors in Electric Car
Abstract The objective of this paper is assessing use of series DC motor in electric car with its rotation speed controller, and evaluating its performances when different running cases of electric car with different loads. The...
2014 / Zeina Bitar, Samih Al Jabi, Imad Khamis -
Numerical investigation of floating breakwater movement using SPH method2015 / A. Najafi-Jilani, A. Rezaie-Mazyak
-
On board LNG reliquefaction technology: a comparative study2014 / J. Romero Gómez, M. Romero Gómez, R. Ferreiro Garcia, A. De Miguel Catoira
-
Multiagent-Based Distributed Load Shedding for Islanded Microgrids2014 / Xi Wu, Ping Jiang, Jing Lu
-
A Table-Shaped Tactile Sensor for Detecting Triaxial Force on the Basis of Strain Distribution2013 / Jeong Lee, Min-Gyu Kim, Mitsuhiro Shikida, Kazuo Sato
-
Regression Models Using Fully Discharged Voltage and Internal Resistance for State of Health Estimation of Lithium-Ion Batteries2015 / Kuo-Hsin Tseng, Jin-Wei Liang, Wunching Chang, Shyh-Chin Huang
-
Preliminary Design and Simulation of a Turbo Expander for Small Rated Power Organic Rankine Cycle (ORC)2014 / Roberto Capata, Gustavo Hernandez
-
Flow dynamics in low aspect ratio dump combustor
Abstract This paper reports an experimental investigation of the flow field inside a low aspect ratio dump combustor. The length of the combustor studied was less than the reattachment length for the separated flow. The exit of the combustor is...
2015 / N.P. Yadav, Abhijit Kushari -
Numerical Research on Segmented Flexible Airfoils Considering Fluid-structure Interaction
Abstract This paper investigated four kinds of segmented flexible airfoils with membrane material on the upper surface and rigid structure on the lower surface. Fluid-structure interaction method was adopted in the numerical simulation for the...
2015 / Dong Hefeng, Wang Chenxi, Li Shaobin, Song Xi Zhen -
Vertical force acting on partly submerged spindly cylinders2014 / Xinbin Zhang, Jihong Yan, Jie Zhao, Yanan Wang, Qinmin Pan
-
Real-Time Energy Management for Diesel Heavy Duty Hybrid Electric Vehicles2014 / Dezong Zhao, Richard Stobart, Guangyu Dong, Edward Winward
-
Optimal Selection Method of Process Patents for Technology Transfer Using Fuzzy Linguistic Computing2014 / Gangfeng Wang, Xitian Tian, Junhao Geng
-
Surrogate-based Airfoil Design with Space Mapping and Adjoint Sensitivity
Abstract This paper presents a space mapping algorithm for airfoil shape optimization enhanced with adjoint sensitivities. The surrogate-based algorithm utilizes low-cost derivative information obtained through adjoint sensitivities to improve the...
2015 / Yonatan A. Tesfahunegn, Slawomir Koziel, Leifur Leifsson, Adrian Bekasiewicz -
Application of an Instrumental and Computational Approach for Improving the Vibration Behavior of Structural Panels Using a Lightweight Multilayer Composite2014 / Alberto Sánchez, Manuel García, Miguel Sebastián, Ana Camacho
-
Convex Optimization for the Energy Management of Hybrid Electric Vehicles Considering Engine Start and Gearshift Costs2014 / Tobias Nüesch, Philipp Elbert, Michael Flankl, Christopher Onder, Lino Guzzella
-
Efficient Processing of Continuous Skyline Query over Smarter Traffic Data Stream for Cloud Computing2013 / Wang Hanning, Xu Weixiang, Jiulin Yang, Lili Wei, Jia Chaolong