Mechanical engineering topic list of research papers
-
Influence of anti-dive and anti-squat geometry in combined vehicle bounce and pitch dynamics2005 / M Azman, H Rahnejat, P D King, T J Gordon
-
Bone Remodelling Model Incorporating Both Shape and Internal Structure Changes by Three Different Reconstruction Mechanisms. A Lumbar Spine Case2016 / Paweł Wymysłowski, Tomasz Zagrajek
-
Nonequilibrium Thermal Dynamic Modeling of Porous Medium Vacuum Drying Process2012 / Zhijun Zhang, Ninghua Kong
-
Effectiveness of Minimizing Cutting Fluid Use when Turning Difficult-to-cut Alloys
Abstract The environmental impact of lubricants is a key issue towards sustainable manufacturing. Even if dry cutting can be identified as the ultimate goal to achieve, lubrication is still a hardly surmountable industrial standard when machining...
2015 / Paolo C. Priarone, Matteo Robiglio, Luca Settineri, Vincenzo Tebaldo -
Gas Mixtures for Welding with Micro-Jet Cooling2015 / T. Węgrzyn
-
Numerical study of wave transmission over double submerged breakwaters using non-hydrostatic wave model
Summary In the present work, a non-hydrostatic wave model SWASH (an acronym of Simulating WAves till SHore) is used to simulate the wave transmission over double trapezoidal submerged breakwaters. The numerical results were compared with the results ...
2015 / Bingchen Liang, Guoxiang Wu, Fushun Liu, Hairong Fan, Huajun Li -
Distance Measurement for the Indoor WSN Nodes Using WTR Method2014 / Zheng Zhang, Junxiao Zhu, Jiabiao Ruan, Gangbing Song
-
An experimental study on premixed charge compression ignition-direct ignition engine fueled with ethanol and gasohol
Abstract This paper investigates the combustion, performance and emission characteristics of a partial Premixed Charge Compression Ignition-Direct Injection (PCCI-DI) Engine with premixed fuels ethanol and gasohol (90% gasoline and 10% ethanol by...
2015 / S. Saravanan, K. Pitchandi, G. Suresh -
Freeway Travel Speed Calculation Model Based on ETC Transaction Data2014 / Jiancheng Weng, Rongliang Yuan, Ru Wang, Chang Wang
-
Development and Approbation of Methods and Technical Solutions of Reduction of Vibration of Power Plants and Joining Mechanical Systems
Abstract Power plants of different kinds are widely used in modern machinery, energetic, chemical industry, other branches, in transport and domestic conditions. Vibration and related with it mechanical noise of power plants and joining mechanical...
2015 / Andrey V. Vasilyev -
3D visualization of two-phase flow in the micro-tube by a simple but effective method2009 / X Fu, P Zhang, H Hu, C J Huang, Y Huang, et al.
-
A new model for Thomson-type actuator including the pressure buffer2015 / Y. Wu, M. Li, M. Rong, Y. Wu, F. Yang, et al.
-
Non-Contact Translation-Rotation Sensor Using Combined Effects of Magnetostriction and Piezoelectricity2012 / Bintang Yang, Qingwei Liu, Ting Zhang, Yudong Cao, Zhiqiang Feng, et al.
-
Experimental investigations on the power extraction of a turbine driven by a pulse detonation combustor
Abstract In order to grasp the interaction mechanism between the pulse detonation combustor (PDC) and the turbine, the experimental work in this paper investigates the key factors on the power extraction of a turbocharger turbine driven by a PDC. A...
2013 / Xiaofeng Li, Longxi Zheng, Hua Qiu, Jingbin Chen -
Numerical analysis of evaporation in microchannel under capillary pumping2015 / Jarosław Karwacki, Helena Nowakowska, Marcin Lackowski, Dariusz Butrymowicz
-
CFD Analysis of Thin Film Lubricated Journal Bearing
Abstract The three dimensional CFD analysis were investigated regarding the performance characteristics of a thin film lubricated journal bearing. In the existing literature, several numerical analyses had been reported. Most of these analyses used...
2014 / B. Manshoor, M. Jaat, Zaman Izzuddin, Khalid Amir -
Satellite Constellation Configuration Design with Rapid Performance Calculation and Ordinal Optimization
Abstract Satellite constellation configuration design is a complicated and time-consuming simulation optimization problem. In this paper, a new method called the rapid method for satellite constellation performance calculation is developed by the...
2011 / Hongzheng CUI, Chao HAN -
Thermodynamic consistency of the pseudopotential lattice Boltzmann model for simulating liquid–vapor flows
Abstract In this paper, the effects of the equation of state on the thermodynamic consistency and the interface thickness are examined in the pseudopotential lattice Boltzmann modeling of liquid–vapor flows. It is shown that, with the increase of...
2014 / Q. Li, K.H. Luo -
Rear-end and Lane-changing Collisions Avoidance Theoretical Models of the Multi-lane Freeway in Disaster Weather
Abstract Rear-end collisions and lane-changing collisions are two most common types of automobile collision in multi-lane freeway traffic conditions, and they are dangerous in disaster weather. Car-following behavior, which describes the behavior of ...
2013 / Haifeng Wan, Zhen Liu, Haocheng Wang -
Vibration Analysis of Elastically Restrained Laminated Composite Sound Radiation Plates Via a Finite Element Approach
Abstract The vibration characteristics (natural frequencies and vibration shapes) of elastically restrained laminated composite plates used for sound radiation are studied via both theoretical and experimental approaches. The laminated composite...
2014 / C.H. Jiang, T.Y. Kam