Mechanical engineering topic list of research papers
-
Some remarks on surface conditions of solid body plunging into water with particle method2014 / Masao Yokoyama, Yoshihiro Kubota, Kenji Kikuchi, Genki Yagawa, Osamu Mochizuki
-
Data analysis and visualization for the bridge deck inspection and evaluation robotic system2015 / Hung Manh La, Nenad Gucunski, Seong-Hoon Kee, Luan Van Nguyen
-
Development of magnetic navigation method based on distributed control system using magnetic and geometric landmarks2014 / Naoki Akai, Sam Ann Rahok, Kazumichi Inoue, Koichi Ozaki
-
Aeroelastic modeling and analysis of the wing/engine system of a large aircraft
Abstract An aeroelastic model of the wing/engine system of a large commercial aircraft is established. Taking into account the engine inertia force and thrust, static aeroelastic deformation of the wing structure and load distributions including...
2012 / Libo Wang, Zhiqiang Wan, Qiang Wu, Chao Yang -
Optimization and Numerical Simulation of Multi-layer Microchannel Heat Sink
Abstract The configuration sizes of multi-layer microchannel heat sink is optimized in order to enhance the performance of the high flux chip, which is 556W/cm2. Taking the thermal resistance and the pressure drop as goal functions, a...
2012 / Baodong Shao, Lifeng Wang, Heming Cheng, Jianyun Li -
Parameter equation study for screw centrifugal pump
Abstract Compared with the general centrifugal pump, the screw centrifugal pump has a spiral radial impeller and opening flow passage. The impeller inlet is a spiral blade and outlet of blade looks like to mixing-flow pump blade. Its special...
2012 / Xiaorui Cheng, Rennian Li -
Study of the Influences of Laser Parameters on Laser Assisted Machining Processes
Abstract Hybrid machining processes using additional energy sources such as laser assisted machining (LAM) have increased considerably during the last years. The benefits of LAM for reducing tool wear and cutting forces are well known, especially...
2013 / Flaviana Tagliaferri, Giacomo Leopardi, Ulrich Semmler, Michael Kuhl, Biagio Palumbo -
Effect of tip geometry and tip clearance on aerodynamic performance of a linear compressor cascade
Abstract The tip leakage flow between a blade and a casing wall has a strong impact on compressor pressure rise capability, efficiency, and stability. Consequently, there is a strong motivation to look for means to minimize its impact on...
2013 / Jingjun Zhong, Shaobing Han, Huawei Lu, Xiaoxu Kan -
Optimization of cutting conditions of YG15 on rough and finish cutting in WEDM based on statistical analyses2013 / Yu Huang, Wuyi Ming, Jianwen Guo, Zhen Zhang, Guangdou Liu, et al.
-
Potential of Large Output Power, High Thermal Efficiency, Near-zero NOx Emission, Supercharged, Lean-burn, Hydrogen-fuelled, Direct Injection Engines
Abstract Large output power, compactness and lightness in weight are indispensable for vehicular engines [1]., [2]. An experimental study for large output power, high thermal efficiency and near-zero emissions without any exhaust gas after-treatment ...
2012 / Kenji Nakagawa, Kimitaka Yamane, Tetsuya Ohira -
Uncertainty Estimation for Performance Evaluation of a Confocal Microscope as Metrology Equipment2013 / O. Guarneros, J. de Vicente, M. Maya, J. L. Ocaña, C. Molpeceres, et al.
-
Application of Synthetic Relative Measuring Method in On-Line Monitoring for Capacitive Equipment
Abstract On-line measurement for dielectric loss angle can effectively monitor the insulation condition of capacitive equipment in power system. Synthetic relative measuring method not only markedly overcomes the shortcomings of traditional absolute ...
2011 / Guo Qing, Qin Lijun, Hao Cuijuan, Wang Ying -
Size Reduction of an Engine Waste-Heat Driven Air- Conditioner for Passenger Cars and Light-Duty Trucks
Abstract An engine waste-heat driven adsorption air conditioning system is studied to provide cooling for vehicles to improve fuel economy.It is critical to reduce the size of the system in order to adopt the technology in the applications of...
2012 / Yongfang Zhong -
Experimental Investigation on Attenuation of Emission with Optimized LPG Jet Induction in a Dual Fuel Diesel Engine and Prediction by ANN Model
Abstract Environment pollution due to vehicles exhaust emission is still a severe crisis and an international concern has been raised for its control and diminution. Especially, man-kind is experiencing an epidemic of illnesses made worse by air...
2012 / C.J. Thomas Renald, P. Somasundaram -
A Modeling Approach of System Reliability Based on Statecharts
Abstract The paper puts forward a modeling approach of system reliability based on statecharts. Firstly, it analyzes the limitation of current reliability modeling approach, and introduces the elements and characters of statecharts. Then, it sets...
2012 / Jun-jie Liu, Xue-zhi Lv, Yong-li Yu, Hou Na -
Ultrasonic-Assisted Grinding of Ti6Al4V Alloy
Abstract In conventional grinding of hard to cut materials such as Ti6Al4V alloys, surface burning, redeposition and adhesion of chips to the grinding wheel and workpeice occur visibly unless it is carried out at low speeds and with high volume of...
2012 / Mohsen Ghahramani Nik, Mohammad R. Movahhedy, Javad Akbari -
A Review: Hybrid Locomotion of In-pipe Inspection Robot
Abstract In the past five years, researchers have improvised the existing in-pipe inspection robots by developing hybrid locomotion by combining two or more propulsion mechanism in achieving robust but yet flexible robot platform. In this paper,...
2012 / Nur Shahida Roslin, Adzly Anuar, Muhammad Fairuz Abdul Jalal, Khairul Salleh Mohamed Sahari -
HHT Time-Frequency Energy Spectrum Technique Used in Main Joints Condition Monitoring of QCC Track
Abstract According to the quayside container crane (QCC), when the trolley passes by the tracks, the vibration which has features including heavy-load, high-speed and huge-impact happens. The Time-Frequency Energy Spectrum Technique based on...
2012 / YIN Yinan, HU Xiong -
An Innovative Design to Improve Systematic Odometry Error in Non-holonomic Wheeled Mobile Robots
Abstract A major drawback with the popular differential drive wheeled mobile robot (WMR) when autonomously navigating on smooth indoor surfaces is its inability to continuously maintain straight-line trajectories. The inherent weakness of its...
2012 / Murelitharan Muniandy, Kanesan Muthusamy -
Gas/particle Interaction in Ultrasound Agitated Gas Flow
Abstract Acoustic waves imply specific force and stress distributions onto particles in a gaseous environment. In this paper time-dependent and time-averaged acoustic forces of resonant standing ultrasound waves on rigid particles and agglomerates...
2012 / Claas Knoop, Udo Fritsching