Materials engineering topic list of research papers
-
Quantitative full-field strain measurements by SAOED (SrAl2O4:Eu2+,Dy3+) mechanoluminescent materials2016 / Ali Imani Azad, Mohammad Reza Rahimi, Gun Jin Yun
-
Adhesively-bonded GFRP-glass sandwich components for structurally efficient glazing applications
Abstract Composite sandwich structures made of thick glass face sheets adhesively-bonded to glass fibre-reinforced polymer (GFRP) core profiles have the potential to outperform existing non-composite glazing configurations but their feasibility has...
2016 / Carlos Pascual, Jacopo Montali, Mauro Overend -
Analytical Model of the Anisotropic Dimensional Change on Sintering of Ferrous PM Parts2016 / I. Cristofolini, N. Corsentino, M. Larsson, A. Molinari
-
Natural Magnetite for thermal energy storage: Excellent thermophysical properties, reversible latent heat transition and controlled thermal conductivity
Abstract Thermal energy storage (TES) has gained growing interest in the area of renewable energy due to its great potential for increasing the efficiency of concentrated solar power (CSP) plants. One of the central issues is the development of a...
2016 / Yaroslav Grosu, Abdessamad Faik, Iñigo Ortega-Fernández, Bruno D'Aguanno -
The microstructure of non-polar a-plane (11 2¯0) InGaN quantum wells2016 / James T. Griffiths, Fabrice Oehler, Fengzai Tang, Siyuan Zhang, Wai Yuen Fu, et al.
-
Bioleaching of nickel by Aspergillus humicola SKP102 isolated from Indian lateritic overburden
Abstract The lateritic deposits spread over the Eastern Ghats of Sukinda Valley, Odisha, India, produce a huge amount of overburden annually as a byproduct of chromite mining. This chromite mining overburden contains nickel, the only source of the...
2016 / Suchhanda Ghosh, A.K. Paul -
Creating a patient carried Men1 gene point mutation on wild type iPSCs locus mediated by CRISPR/Cas9 and ssODN
Abstract A patient specific point mutation (c.1288G>T) of Men1 gene was introduced into wide type iPSC line with CRISPR/Cas9 and single-stranded donor oligonucleotides carrying the mutation. The mutated iPSC line has a heterozygous c.1288G>T...
2016 / Dongsheng Guo, Haikun Liu, Ge Gao, Yanli Liu, Yuanqi Zhuang, et al. -
Effect of neutron irradiation on the microstructure of tungsten
Abstract Two grades of pure tungsten, single and polycrystalline, were irradiated for 282 days in the HFR reactor, Petten, at 900 °C to an average damage level of 1.6dpa. Each grade of tungsten was investigated using the transmission electron...
2016 / M. Klimenkov, U. Jäntsch, M. Rieth, H.C. Schneider, D.E.J. Armstrong, et al. -
Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields
Abstract Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their...
2016 / Jing Yan -
Optimizing the Configuration of a Compact Thermal Facade Module for Solar Renovation Concept in Buildings
Abstract Solar concepts show potentially an improved cost-performance (energy) ratio when applied as the integrated parts of building renovations. This paper reported a compact solar thermal facade (STF) module with the internally extruded flow...
2016 / Jingchun Shen, Xingxing Zhang, Tong Yang, Llewellyn Tang, Hiroyuki Shinohara, et al. -
Development of high-strength, low-cost wrought Mg–2.0mass% Zn alloy with high Mn content
Abstract Mg–Zn–Mn-based alloys have received considerable attention because of their high creep resistance, strength, and good corrosion resistance. The alloying element Mn in Mg–Zn-based alloys is commonly less than 1wt%. In the present study, the...
2016 / Fusheng. Pan, Jianjun Mao, Gen Zhang, Aitao Tang, Jia She -
Micromachined Gas Sensors Based on Au-functionalized SnO2 Nanorods Directly Integrated without Catalyst Seeds via AA-CVD
Abstract Tin oxide nanorods functionalized with Au nanoparticles are vapour synthesised at relatively lower temperatures than previously reported and without the need of catalyst seeds using co-deposition method via aerosol-assisted chemical vapour...
2017 / S. Vallejos, S. Selina, F.E. Annanouch, I. Gràcia, E. Llobet, et al. -
Application of Synchrotron Radiation for In Situ XRD Investigation of Zirconium Hydrides Formation at Gas-phase Hydrogenation
Abstract The zirconium alloy (Zr1%Nb) samples with a micron-thick nickel layer were investigated for hydrogen sorption ability. Hydrogenation was carried out by gas phase method at temperatures of 350, 450 and 550° C. Hydrogen pressure in chamber...
2016 / Maxim S. Syrtanov, Viktor N. Kudiiarov, Egor B. Kashkarov, Alexander N. Shmakov, Zakhar S. Vinokurov, et al. -
Data files for ab initio calculations of the lattice parameter and elastic stiffness coefficients of bcc Fe with solutes
Abstract We present computed datasets on changes in the lattice parameter and elastic stiffness coefficients of bcc Fe due to substitutional Al, B, Cu, Mn, and Si solutes, and octahedral interstitial C and N solutes. The data is calculated using the ...
2016 / Michael R. Fellinger, Louis G. Hector Jr., Dallas R. Trinkle -
Cytopathic Effects of X-ray Irradiation and MnO Nanoparticles on Human Glioblastoma (U87)
Abstract Glioblastoma is a leader among the most malignant brain tumors with the average lifespan of patients around 9-12 months. For prevention and treatment of neuropathology, a variety of therapeutic and surgical approaches are being developed...
2016 / K.E. Kuper, E.L. Zavjalov, I.A. Razumov, A.V. Romaschenko, A.S. Stupak, et al. -
Interaction of Nitric Acid and Zn Intermetallides of Fe, Cr, Ni Obtained after Stripping Zn from EP823 Steel Solutions in Zinc
Abstract Two samples of the steel EP823 solution in zinc were prepared. The samples were undergone to zinc vacuum distillation. X-ray analysis showed that the residue particles have a different structure and ratio of elements, depending on zinc...
2016 / K.N. Dvoeglazov, A.Yu. Shadrin, M.A. Kuzin, E.Yu. Pavlyukevich, A.O. Makarov -
Recent advancements of high efficient donor–acceptor type blue small molecule applied for OLEDs
Although the organic light-emitting devices (OLEDs) encompassing TVs, smartphones, and wearable devices, etc. already have been commercialized, there is still room to pursue material improvements in efficiency and cost-effectiveness. Organic light-emitting...
2017 / Yunchuan Li, Ji-Yan Liu, Yuan-Di Zhao, Yuan-Cheng Cao -
Investigations for the substantiation of high-temperature nuclear power generation technology using fast sodium-cooled reactor for hydrogen production and other innovative applications (Part 1)
Abstract Neutronics and thermal physics studies of BN-VT reactor installation with 600-MW thermal power demonstrated the possibility in principle to achieve the required parameters of high-temperature fast reactor for production of large quantities...
2016 / S.G. Kalyakin, F.A. Kozlov, A.P. Sorokin, G.P. Bogoslovskaya, A.P. Ivanov, et al. -
Laser diode area melting for high speed additive manufacturing of metallic components
Abstract Additive manufacturing processes have been developed to a stage where they can now be routinely used to manufacture net-shape high-value components. Selective Laser Melting (SLM) comprises of either a single or multiple deflected high...
2017 / Miguel Zavala-Arredondo, Nicholas Boone, Jon Willmott, David T.D. Childs, Pavlo Ivanov, et al. -
Synchrotron Radiation Methods for Registration of Particles Ejected from Free Surface of Shock-loaded Metals
Abstract The jet structure from metal surface initiated by shock wave was investigated by small angle X-ray scattering (SAXS) technique for the first time. In these experiments used synchrotron radiation from the colliders VEPP-4. The beamlines 0-b...
2016 / K.A. Ten, E.R. Pruuel, A.O. Kashkarov, I.A. Rubtsov, A.V. Kosov, et al.