Materials engineering topic list of research papers
-
Effect of Turning Parameters on Roundness and Hardness of Stainless Steel: SUS 303
Abstract Stainless steel JIS:SUS 303 is widely used for automotive part. This part is mostly manufactured by turning operation. However, turning parameters could be affected to roundness and hardness of workpieces. The purpose of this research was...
2013 / Komson Jirapattarasilp, Choobunyen Kuptanawin -
Refractive Index Sensitivity of a Polymer-Clad Silica Optical Fiber Structure Effectively Tuned by Plasma Deposited Diamond-Like Carbon Nano-Coating
Abstract Fabrication procedure and refractive index (RI) sensitivity of a diamond-like carbon (DLC) nano-coated optical fiber sensing structure is presented. The overlays were deposited by Radio Frequency Plasma Assisted Chemical Vapor Deposition...
2012 / Mateusz Śmietana, Frederic Akoa Oyono, Jacek Grabarczyk, Jan Szmidt -
Integrated On-chip Photodetection of Intracellular Calcium in Response to the Activation of G-protein Coupled Receptors
Abstract Microfabricated amorphous silicon photodiodes have been used to monitor the increase of fluorescence in living cells following calcium release into the cytosol in response to G-protein coupled receptors (GPCR) activation. A signal...
2012 / S.A.M. Martins, G. Moulas, J.R.C. Trabuco, G.A. Monteiro, V. Chu, et al. -
Effect of Excited Duration on Cutting Characteristics of Polycarbonate Sheet Subjected to Center-Bevelled Blade Indentation Excited by Ultrasonic Wave
Abstract This paper describes the cutting process of a 0.5mm thickness polycarbonate (PC) worksheet stacked on another 0.5mm thickness PC underlay by an adhesive tape layer. As the first investigation, the cutting line force of the two-line blade...
2013 / S. Nagasawa, Y. Komiyama, Y. Fukuzawa -
Learning from nature: constructing high performance graphene-based nanocomposites
After billions of years of evolution, natural materials, such as bamboo, bone, and nacre, show unique mechanical properties, due to their intrinsic hierarchical micro/nanoscale architecture and abundant interfacial interactions. This relationship between...
2016 / Shanshan Gong, Hong Ni, Lei Jiang, Qunfeng Cheng -
Data of the interacting protein networks and nucleotide metabolism pathways related to NDK and NT5
Abstract The data presented in this article are related to the research article entitled “Antibacterial mechanism of daptomycin antibiotic against Staphylococcus aureus based on a quantitative bacterial proteome analysis” (Ma et al., 2016) [1]....
2016 / Dan Zhang, Wen Ma, Yu He, Gu He, Peng Zhang, et al. -
Discharge current modes of high power impulse magnetron sputtering2015 / Zhongzhen Wu, Shu Xiao, Zhengyong Ma, Suihan Cui, Shunping Ji, et al.
-
A quantum dot asymmetric self-gated nanowire FET for high sensitive detection2015 / Zhangchun Shi, Xiaohong Yang, Chenglei Nie, Weihong Yin, Qin Han, et al.
-
Dataset of botulinum toxin A influence on interleukins under neuropathy
Abstract Our data show that botulinum toxin A (BoNT/A) didn’t influence motor functions in naïve and CCI-exposed rats, but diminished the neuropathic pain-related behavior. The results indicate that BoNT/A administration diminished the spinal Iba-1...
2016 / Magdalena Zychowska, Ewelina Rojewska, Wioletta Makuch, Siro Luvisetto, Flaminia Pavone, et al. -
Matching the Characteristics of Low Wind Speed Turbines with Candidate Wind Regimes
Abstract The steady growth of the wind power sector, along with various techno-economic and social constraints, has eventually reduced the availability of sites with high wind energy potential. Hence, the future of wind power developments would...
2016 / Sathyajith Mathew, Chee Ming Lim, Mohammed Iskandar Petra, Geeta Susan Philip, Maziyyah Noorfathin, et al. -
Composites of Aluminium Alloy Matrix Reinforced by a Steel Mesh
Abstract Composites with an aluminium and aluminium alloy matrix are lightweight engineering materials for applications in aircraft, defence and automotive industries. On aluminium alloy and aluminium matrices composites with a steel mesh were hot...
2015 / S. Szczepanik -
Stress-anneal-induced magnetic anisotropy in highly textured Fe-Ga and Fe-Al magnetostrictive strips for bending-mode vibrational energy harvesters2016 / Jung Jin Park, Suok-Min Na, Ganesh Raghunath, Alison B. Flatau
-
Tunable and white light emitting AlPO4 mesoporous glass by design of inorganic/organic luminescent species2015 / Jin He, Yan Wang, Rihong Li, Xinqiang Yuan, Shiqing Xu, et al.
-
Coriolis effect on responses of rotating thin piezoelectric hollow cylinder
Abstract Coriolis effect is considered in the analysis of a rotating piezoelectric hollow cylinder. An inhomogeneous Bessel equation governing the radial mechanical displacement is derived, which can be approximated as an Euler type differential...
2016 / Wenyao Liu, Weiqiu Chen -
Fourth-order strain-gradient phase mixture model for nanocrystalline fcc materials2016 / Benjamin Klusemann, Swantje Bargmann, Yuri Estrin
-
Research Update: Diode performance of the Pt/Al2O3/two-dimensional electron gas/SrTiO3 structure and its time-dependent resistance evolution2016 / Taehwan Moon, Hae Jun Jung, Yu Jin Kim, Min Hyuk Park, Han Joon Kim, et al.
-
Enhanced thermoelectric properties of n-type NbCoSn half-Heusler by improving phase purity2016 / Ran He, Lihong Huang, Yumei Wang, Georgy Samsonidze, Boris Kozinsky, et al.
-
Atmospheric pressure microplasmas in ZnO nanoforests under high voltage stress2015 / Nafisa Noor, Venkata Manthina, Kadir Cil, Lhacene Adnane, Alexander G. Agrios, et al.
-
Reduced order modeling strategies for computational multiscale fracture
Abstract The paper proposes some new computational strategies for affordably solving multiscale fracture problems through a FE2 approach. To take into account the mechanical effects induced by fracture at the microstructure level the Representative...
2016 / J. Oliver, M. Caicedo, A.E. Huespe, J.A. Hernández, E. Roubin -
Bioactive polymeric scaffolds for tissue engineering
Abstract A variety of engineered scaffolds have been created for tissue engineering using polymers, ceramics and their composites. Biomimicry has been adopted for majority of the three-dimensional (3D) scaffold design both in terms of...
2016 / Scott Stratton, Namdev B. Shelke, Kazunori Hoshino, Swetha Rudraiah, Sangamesh G. Kumbar