Materials engineering topic list of research papers
-
Are there reasons against open-ended research into solar radiation management? A model of intergenerational decision-making under uncertainty
Abstract Solar radiation management (SRM) has been proposed as a means of last resort against dangerous climate change. We propose a stylized model of intergenerational decision making on SRM research, greenhouse-gas abatement and SRM deployment,...
2017 / Martin F. Quaas, Johannes Quaas, Wilfried Rickels, Olivier Boucher -
Influence of Aluminium Alloy Anodizing and Casting Methods on Structure and Functional Properties2016 / J. Konieczny, K. Labisz, M. Polok-Rubiniec, A. Włodarczyk-Fligier
-
Micromagnetic simulation of the influence of grain boundary on cerium substituted Nd-Fe-B magnets2016 / D. Liu, T. Y. Zhao, R. Li, M. Zhang, R. X. Shang, et al.
-
Cloud Computing and Extreme Learning Machine for a Distributed Energy Consumption Forecasting in Equipment-Manufacturing Enterprises2017 / Rui-Dong Wang, Xue-Shan Sun, Xin Yang, Haiju Hu
-
"The origins of triboemission -- Correlating wear damage with electron emission"
Abstract Triboemission – i.e. the emission of photons, electrons and other charged particles that arise from a sliding contact – may play a key role in tribochemical processes, such as lubricant degradation. However, the mechanisms that give rise to ...
2017 / Alessandra Ciniero, Julian Le Rouzic, Iain Baikie, Tom Reddyhoff -
Chemical interaction between polymer and cement in polymer-cement concrete2016 / R. Wang, J. Li, T. Zhang, L. Czarnecki
-
Comparative Study of Trigger Configuration for Enhancement of Crashworthiness of Automobile Crash Box Subjected to Axial Impact Loading
Abstract An automobile crash box is a thin walled structure made of metal or composite material which is mounted on the front region of the vehicle. Its main purpose is to absorb the energy due to collision in the event of a crash. Crash boxes made...
2017 / N Nasir Hussain, Srinivasa Prakash Regalla, Yendluri V Daseswara Rao -
Silver ion-mediated killing of a food pathogen: Melting curve analysis data of silver resistance genes and growth curve data
Abstract Limited antibacterial activity of silver ions leached from silver-impregnated food contact materials could be due to: 1) the presence of silver resistance genes in tested bacteria; or 2) lack of susceptibility to silver ion-mediated killing ...
2017 / Kuppan Gokulan, Katherine Williams, Sangeeta Khare -
Modification of Cement Matrix Using Carbon Nanotube Dispersions and Nanosilica
Abstract Complex nanodispersed systems with multi-walled carbon nanotubes and nanodispersed silica have a significant impact on the processes of hydration, setting and hardening of construction composites with Portland cement binder predetermining...
2017 / G.I. Yakovlev, G. Skripkiunas, I.S. Polianskich, O. Lahayne, J. Eberhardsteiner, et al. -
The effect of loading direction and Sn alloying on the deformation modes of Zr: An in-situ neutron diffraction study
Abstract Deformation modes (slip and twining) in a strongly textured model hcp alloy system (Zr–Sn) have been investigated using in-situ neutron diffraction and deformation along with complementary electron microscopy. Analysis of the evolution of...
2015 / K.V. Mani Krishna, D.G. Leo Prakash, Gábor Timár, Arnas Fitzner, D. Srivastava, et al. -
A Resonant Pressure Sensor Capable of Temperature Compensation with Least Squares Support Vector Machine
Abstract Resonant pressure sensors are widely used in pressure monitoring due to high accuracies, long-term stabilities and quasi-digital outputs, which, however, suffers from the key issue of temperature drifts. This paper presents a resonant...
2017 / Lin Zhu, Bo Xie, Yonghao Xing, Deyong Chen, Junbo Wang, et al. -
Flexible Flow Sensors for Air Conditioning Systems Based on Printed Thermopiles
Abstract Air conditioning systems need permanent monitoring of the mass and energy flows in air ducts to assess their proper operation and detect and correct changes that may occur with time. This is a prerequisite for optimization in terms of...
2017 / H. Steiner, S. Cerimovic, T. Glatzl, F. Kohl, M. Schlauf, et al. -
Membrane-sealed Bioreactor for On-site Autonomous Detection of Fungi Spore Contamination in Archives
Abstract We present a miniaturized culture medium based bioreactor for monitoring airborne fungal spores. The bioreactor is sealed with an electrically actuated sacrificial membrane, which is opened at the desired time of measurement. An air...
2017 / P. Papireddy Vinayaka, S. van den Driesche, R. Blank, A. Chakraborty, R. Amin, et al. -
Nonlinear Fatigue Crack Growth Simulations using J -integral Decomposition and XFEM
Abstract In the present work, nonlinear fatigue crack growth analysis of an inclined edge crack is performed by extended finite element method (XFEM) [1]. The material behavior is assumed to be nonlinear, which is modelled by Ramberg-Osgood model...
2017 / Manish Kumar, A.S. Bhuwal, I.V. Singh, B.K. Mishra, S. Ahmad, et al. -
Evaluation of interfractional variation of the centroid position and volume of internal target volume during stereotactic body radiotherapy of lung cancer using cone-beam computed tomography2017 / Yanan Sun, Hong Ge, Siguo Cheng, Chengliang Yang, Qianqian Zhu, et al.
-
State of Spent Molding Sands in the Mold Large-Size Cast2016 / M. Łucarz
-
High P – T experiments and first principles calculations of the diffusion of Si and Cr in liquid iron
Abstract Chemical diffusion rates of Si and Cr in liquid iron have been measured over the P–T range of 1–18GPa and 1873–2428K. The experiments were performed using a multi-anvil apparatus with diffusion couples comprised of pure iron and iron alloy...
2017 / Esther S. Posner, David C. Rubie, Daniel J. Frost, Vojtěch Vlček, Gerd Steinle-Neumann -
Magnetization reversal processes of isotropic permanent magnets with various inter-grain exchange interactions2017 / Hiroshi Tsukahara, Kaoru Iwano, Chiharu Mitsumata, Tadashi Ishikawa, Kanta Ono
-
Morphology and surface topography of Ti6Al4V lattice structure fabricated by selective laser sintering2017 / J. Maszybrocka, A. Stwora, B. Gapiński, G. Skrabalak, M. Karolus
-
High-Z material erosion and its control in DIII-D carbon divertor
Abstract As High-Z materials will likely be used as plasma-facing components (PFCs) in future fusion devices, the erosion of high-Z materials is a key issue for high-power, long pulse operation. High-Z material erosion and redeposition have been...
2017 / R. Ding, D.L. Rudakov, P.C. Stangeby, W.R. Wampler, T. Abrams, et al.