Materials engineering topic list of research papers
-
In situ bending of an Au nanowire monitored by micro Laue diffraction2015 / Cédric Leclere, Thomas W. Cornelius, Zhe Ren, Anton Davydok, Jean-Sébastien Micha, et al.
-
Emergent wave phenomena in coupled elastic bars: from extreme attenuation to realization of elastodynamic switches2017 / Qianli Chen, Ahmed Elbanna
-
Graphical Method of Reversible Circuits Synthesis2017 / Andrzej Skorupski
-
Research of Interaction Between Zn Based Solders and Cu, Al Substrates2014 / Michal Prach, Igor Kostolný, Roman Koleňák
-
Fabrication and characterization of laminated Ti-(TiB+La2O3)/Ti composite
Abstract The incorporation of ceramic particulate reinforcements into titanium alloys can improve the specific strength and specific stiffness, while inevitably reduce the plasticity and ductility. In this study, in situ synthesized multilayer...
2015 / Yuanfei Han, Hongqiang Duan, Weijie Lu, Liqiang Wang, Di Zhang -
Municipal Plastic Waste Composition Study at Transfer Station of Bangkok and Possibility of its Energy Recovery by Pyrolysis
Abstract The pyrolysis of waste plastic was performed based on the characterization of municipal plastic waste (MPW) from one of Bangkok city's waste transfer station. Results showed that heating value of oil product (49, 47, 43, and 42 MJ/kg, from...
2017 / Chinnathan Areeprasert, Jarudej Asingsamanunt, Supachot Srisawat, Jeerattikul Kaharn, Bundit Inseemeesak, et al. -
Ti-5Al-5Mo-5V-3Cr and similar Mo equivalent alloys: First principles calculations and experimental investigations
Abstract This paper reports the stability of Ti-5Al-5Mo-5V-3Cr and similar Mo equivalent alloys using first principles calculations. The lattice constant and modulus values are calculated using X-ray diffraction and ultrasonic techniques,...
2017 / Premkumar Manda, Ashish Pathak, A. Mukhopadhyay, Uday Chakkingal, A.K. Singh -
Circuits for the Charge Push-through Electronics: Power Efficient Signal Processing Inside the Artificial Cochlear Implant
Abstract This work deals with the new technique called Charge Push-Through technology which is more energy efficient than the currently used approaches. The new energy efficient design regarding utilization of emerging technology such as Energy...
2017 / Jaromir Zak, Jaromir Hubalek, Jan Prasek, Jan Pekarek, Vojtech Svatos, et al. -
Investigation on edge joints of Inconel 625 sheets processed with laser welding
Abstract Laser welding of Inconel 625 edge joint beads in square groove configuration was investigated. The use of different weld geometries in new aerospace solutions explains research on edge joints. A structured plan was carried out in order to...
2017 / F. Caiazzo, V. Alfieri, F. Cardaropoli, V. Sergi -
Exchange bias in Ba0.4Sr0.6TiO3/La0.7Sr0.3MnO3 heterostructures2017 / Srinivasa Rao Singamaneni, John T. Prater, Jagdish Narayan
-
Microstructural evolution in a new Fe based ODS alloy processed by mechanical alloying
Abstract Oxide dispersion strengthened (ODS) ferritic steels containing a high density of nanoscale clusters are produced by mechanical milling show excellent properties such as good irradiation swelling resistance and high-temperature creep...
2016 / Haijian Xu, Zheng Lu, Dongmei Wang, Chunming Liu -
Power analysis data set for 4-Bit MOCLA adder
Abstract In order to reduce the silicon area of the chip and optimize the power of arithmetic circuits, this paper proposes a low power carry look-ahead BCD (Binary Coded Decimal) adder which uses a four bit MOCLA (Multiplexer and Or gate based...
2017 / K. Nehru -
Design and Development of Robotic System for Visual Inspection of Boiler Tube Inner Surface
Abstract In general, inspection routine at power plant industry can be significantly improved by implementing integrated inspection system of which offer various advantages in term of ease of use, reliability, safety, cost and efficiency. Our...
2017 / Muhammad Fairuz Abdul Jalal, Khairul Salleh Mohamed Sahari, Mohd Azwan Aziz, Kamal Yunos, Adzly Anuar, et al. -
Ion Selective Potentiometric Sensor Based on Single Crystalline KTiOPO 4 for Determination of K + -ions
Abstract New improved K + –selective electrode based completely on solid single crystal KTP with nano-capillary conductivity is developed. The crystal KTP grown ...
2017 / A.V. Kopytin, K.E. German, K.Yu. Zhizhin, A.F. Zhukov, E.G. Ilyin, et al. -
The research of constructing dynamic cognition model based on brain network
Abstract Estimating the functional interactions and connections between brain regions to corresponding process in cognitive, behavioral and psychiatric domains is a central pursuit for understanding the human connectome. Few studies have examined...
2017 / Fang Chunying, Li Haifeng, Ma Lin -
A Plastic Strain and Stress Analysis of Bending and Torsion Fatigue Specimens in the Low-cycle Fatigue Region Using the Finite Element Methods
Abstract The assessment of a reliable S-N curve requires an accurate determination of stresses involved. If the stress state is complicated like in a plastic field of deformation the stress for a neck specimen may not always be calculated using...
2017 / Peter Kopas, Milan Saga, Vladislav Baniari, Milan Vasko, Marian Handrik -
Thermo-mechanical Analysis of Uncooled La 0.67 Sr 0.33 MnO 3 Microbolometer Made on Circular SOI Membrane
Abstract We report on thermal analysis of uncooled antenna-coupled La0.67Sr0.33MnO3 microbolometer made on circular SOI membrane with no limitation in its active area (circular membrane with diameter up to 2 500 μm). A simple method how to...
2017 / T. Lalinský, G. Vanko, J. Dzuba, V. Kutiš, G. Gálik, et al. -
Developing Biometric Passive Recognition Sensor Applicable to Wearable Devices: Part I - A Novel Structural Design for Achieving Three Dimensional Images
Abstract This paper presents a novel structural design of a biometric recognition sensor based on wrist vein, comprised by an array of NIR light source, a charge-coupled device (CCD) and a circle frame for a moving camera, to obtain the 3D vein...
2017 / Wenlou Yuan, Yuanhang Xu, Huan Liu, Dong F. Wang -
Focus on overview of innovative materials for energy2017 / Fabien Grasset, Laurent Pic
-
Peculiar electronic, strong in-plane and out-of-plane second harmonic generation and piezoelectric properties of atom-thick α-M2X3 (M = Ga, In; X = S, Se): role of spontaneous electric dipole orientations2017 / Lei Hu, Xuri Huang