Materials engineering topic list of research papers
-
Development of a Probabilistic Safety Assessment Framework for an Interim Dry Storage Facility Subjected to an Aircraft Crash Using Best-Estimate Structural Analysis
Abstract Using a probabilistic safety assessment, a risk evaluation framework for an aircraft crash into an interim spent fuel storage facility is presented. Damage evaluation of a detailed generic cask model in a simplified building structure under ...
2017 / Belal Almomani, Dongchan Jang, Sanghoon Lee, Hyun Gook Kang -
Analysis of polytype stability in PVT grown silicon carbide single crystal using competitive lattice model Monte Carlo simulations2014 / Hui-Jun Guo, Wei Huang, Xi Liu, Pan Gao, Shi-Yi Zhuo, et al.
-
Review of Superfinishing by the Magnetic Abrasive Finishing Process2017 / Lida Heng, Yon Jig Kim, Sang Don Mun
-
Magnetostructural transition in Fe5SiB2 observed with neutron diffraction
Abstract The crystal and magnetic structure of Fe5SiB2 has been studied by a combination of X-ray and neutron diffraction. Also, the magnetocrystalline anisotropy energy constant has been estimated from magnetisation measurements. High quality...
2015 / Johan Cedervall, Sofia Kontos, Thomas C. Hansen, Olivier Balmes, Francisco Javier Martinez-Casado, et al. -
The determination of values of the specific heat capacity of the selected thermal insulation materials used in track bed structure2017 / Peter Dobeš, Libor Ižvolt, Martin Mečár, Jana Malachová
-
Pulse drive: A new power-transmission principle for a compact, high-efficiency, infinitely variable transmission
Abstract In this paper, a new transmission principle, named “pulse drive,” is proposed for potentially realizing a highly compact, high-efficiency, infinitely variable transmission, such as that used in switching electrical power supply systems, by...
2017 / Eiji Tsuchiya, Eiji Shamoto -
Picosecond laser cutting and drilling of thin flex glass
Abstract We investigate the feasibility of cutting and drilling thin flex glass (TFG) substrates using a picosecond laser operating at wavelengths of 1030nm, 515nm and 343nm. 50μm and 100μm thick AF32®Eco Thin Glass (Schott AG) sheets are used. The...
2015 / Krystian L. Wlodarczyk, Adam Brunton, Phil Rumsby, Duncan P. Hand -
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys2017 / Stéphane Gorsse, Christopher Hutchinson, Mohamed Gouné, Rajarshi Banerjee
-
Novel hydrophobic associated polymer based nano-silica composite with core–shell structure for intelligent drilling fluid under ultra-high temperature and ultra-high pressure
Abstract Micro-nano-based drilling fluid has attracted a strong interest due to its attractive properties, and micro-nano composite materials have great potential for developing intelligent drilling fluid. In this study a novel hydrophobic...
2015 / Hui Mao, Zhengsong Qiu, Zhonghou Shen, Weian Huang, Hanyi Zhong, et al. -
Analysis of Potential for CCS in Indonesia
Abstract Understanding the interrelations between energy resources, environmental aspects and economic issues is very fundamental in developing appropriate decisions and policies for achieving energy sustainability. This study aims to develop energy ...
2017 / Arif Darmawan, Agus Sugiyono, Jianguo Liang, Koji Tokimatsu, Akinobu Murata -
Cell adhesion on NiTi thin film sputter-deposited meshes2015 / K. Loger, A. Engel, J. Haupt, Q. Li, R. Lima de Miranda, et al.
-
Accelerated estimation of corrosion rate in supercritical and ultra-supercritical water2017 / David Rodriguez, Dev Chidambaram
-
Mathematical model to investigate the influence of circulation systems on the firing of ceramics
Abstract Relatively large amounts of exhaust gas at low temperature level, especially from the cooling of the ware, leave the tunnel kiln and cause significant heat losses. This gas is normally used for drying purposes, but some studies recommend...
2017 / Tino Redemann, Eckehard Specht -
Implementation of multiaxial high cycle fatigue criterion in finite element analysis2016 / Quoc Huy Vu, Dinh Quy Vu
-
Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting
Abstract Direct solar-to-hydrogen conversion via water splitting was demonstrated in an integrated photovoltaic–electrochemical (PV–EC) device using a hydrogenated amorphous silicon thin film tandem junction (a-Si:H/a-Si:H) solar cell as...
2015 / Félix Urbain, Vladimir Smirnov, Jan-Philipp Becker, Uwe Rau, Jürgen Ziegler, et al. -
Data on metagenomic profiles of activated sludge from a full-scale wastewater treatment plant
Abstract The data in this article mainly present the sequences of activated sludge from a full-scale municipal wastewater treatment plant (WWTP) carrying out simultaneous nitrogen and phosphorous removal in Beijing, China. Data include the...
2017 / Jianhua Guo, Bing-Jie Ni, Xiaoyu Han, Xueming Chen, Philip Bond, et al. -
Intermetallic compounds in 3D integrated circuits technology: a brief review2017 / Syahira Annuar, Reza Mahmoodian, Mohd Hamdi, King-Ning Tu
-
Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation2015 / Hee-Jong Choi, Ho-Hwan Chun, Il-Ryong Park, Jin Kim
-
Pressure-induced amorphization of a dense coordination polymer and its impact on proton conductivity2014 / Daiki Umeyama, Satoshi Horike, Cedric Tassel, Hiroshi Kageyama, Yuji Higo, et al.
-
Commercializing Electrospun Scaffolds for Pluripotent Stem Cell-based Tissue Engineering Applications2017 / Nima Khadem Mohtaram, Vahid Karamzadeh, Yousef Shafieyan, Stephanie M. Willerth