Materials engineering topic list of research papers
-
Noninvasive cross-sectional observation of three-dimensional cell sheet-tissue-fabrication by optical coherence tomography
Abstract Cell sheet engineering allows investigators/clinicians to prepare cell-dense three-dimensional (3-D) tissues, and various clinical trials with these fabricated tissues have already been performed for regenerating damaged tissues. Cell...
2015 / Yuji Haraguchi, Tatsuya Shimizu, Kiminori Mizuuchi, Hiroto Kawata, Mari Kobayashi, et al. -
Tailoring of magnetic softness and GMI effect in Fe-rich thin magnetic wires2017 / V. Zhukova, P. Corte-León, M. Ipatov, A. Talaat, J. M. Blanco, et al.
-
Areva np’s enhanced accident tolerant fuel developments: focus on cr-coated m5 cladding
Abstract AREVA NP (Courbevoie, Paris, France) is actively developing several enhanced accident-tolerant fuels cladding concepts ranging from near-term evolutionary (Cr-coated zirconium alloy cladding) to long-term revolutionary (SiC/SiC composite...
2018 / Jeremy Bischoff, Christine Delafoy, Christine Vauglin, Pierre Barberis, Cédric Roubeyrie, et al. -
Compressed sensing electron tomography of needle-shaped biological specimens – Potential for improved reconstruction fidelity with reduced dose
Abstract Electron tomography is an invaluable method for 3D cellular imaging. The technique is, however, limited by the specimen geometry, with a loss of resolution due to a restricted tilt range, an increase in specimen thickness with tilt, and a...
2015 / Zineb Saghi, Giorgio Divitini, Benjamin Winter, Rowan Leary, Erdmann Spiecker, et al. -
Exploring the influence of loading geometry on the plastic flow properties of geological materials: Results from combined torsion + axial compression tests on calcite rocks
Abstract For technical reasons, virtually all plastic deformation experiments on geological materials have been performed in either pure shear or simple shear. These special case loading geometries are rather restrictive for those seeking insight...
2016 / S.J. Covey-Crump, W.F. Xiao, J. Mecklenburgh, E.H. Rutter, S.E. May -
Artificial neural network and regression modelling to study the effect of reinforcement and deformation on volumetric wear of red mud nano particle reinforced aluminium matrix composites synthesized by stir casting
Abstract Artificial neural network (ANN) approach was used for the prediction of effect of reinforcement and deformation on volumetric wear of red mud nano particle reinforced aluminium matrix composites synthesized by stir casting. Red mud obtained ...
2017 / Gampala Satyanarayana, Gurugubelli Swami Naidu, N. Hari Babu -
Investigating the effect of thermal gradients on stress in solid oxide fuel cell anodes using combined synchrotron radiation and thermal imaging
Abstract Thermal gradients can arise within solid oxide fuel cells (SOFCs) due to start-up and shut-down, non-uniform gas distribution, fast cycling and operation under internal reforming conditions. Here, the effects of operationally relevant...
2015 / James B. Robinson, Leon D. Brown, Rhodri Jervis, Oluwadamilola O. Taiwo, Thomas M.M. Heenan, et al. -
Towards large size substrates for III-V co-integration made by direct wafer bonding on Si2014 / N. Daix, E. Uccelli, L. Czornomaz, D. Caimi, C. Rossel, et al.
-
PRELIMINARY DESIGN OF A PRODUCTION AUTOMATION FRAMEWORK FOR A PYROPROCESSING FACILITY
Abstract Pyroprocessing technology has been regarded as a promising solution for recycling spent fuel in nuclear power plants. The Korea Atomic Energy Research Institute has been studying the current status of equipment and facilities for...
2017 / Moonsoo Shin, Dongseok Ryu, Jonghui Han, Kiho Kim, Young-Jun Son -
Correlating electroluminescence characterization and physics-based models of InGaN/GaN LEDs: Pitfalls and open issues2014 / Marco Calciati, Michele Goano, Francesco Bertazzi, Marco Vallone, Xiangyu Zhou, et al.
-
EFFECT OF A SURFACE OXIDE-DISPERSION-STRENGTHENED LAYER ON MECHANICAL STRENGTH OF ZIRCALOY-4 TUBES
Abstract An oxide-dispersion-strengthened (ODS) layer was formed on Zircaloy-4 tubes by a laser beam scanning process to increase mechanical strength. Laser beam was used to scan the yttrium oxide (Y2O3)–coated Zircaloy-4 tube to induce the...
2017 / Yang-Il Jung, Dong-Jun Park, Jung-Hwan Park, Hyun-Gil Kim, Jae-Ho Yang, et al. -
Potential for energy savings by heat recovery in an integrated steel supply chain
Abstract Heat recovery plays an important role in energy saving in the supply chain of steel products. Almost all high temperature outputs in the steel industry have their thermal energy exchanged to preheat inputs to the process. Despite the...
2016 / Martin McBrien, André Cabrera Serrenho, Julian M. Allwood -
Investigation of the elastic/crystallographic anisotropy of welds for improved ultrasonic inspections
Abstract Ultrasonic inspection is an effective way of ensuring the initial and continued integrity of welded joints non-destructively. The accuracy of the technique can be compromised due to spatial variations in the anisotropy of the material...
2014 / A.F. Mark, Z. Fan, F. Azough, M.J.S. Lowe, P.J. Withers -
Reduction of the interfacial trap density of indium-oxide thin film transistors by incorporation of hafnium and annealing process2015 / Meng-Fang Lin, Xu Gao, Nobuhiko Mitoma, Takio Kizu, Wei Ou-Yang, et al.
-
Radiation hardness of a 180nm SOI monolithic active pixel sensor
Abstract The use of Silicon-on-Insulator (SOI) technology as a particle detector in a high radiation environment is, at present, limited mostly by radiation effects on the transistor characteristics, back gate effect, and mutual coupling between the ...
2015 / S. Fernandez-Perez, M. Backhaus, H. Pernegger, T. Hemperek, T. Kishishita, et al. -
Comparative measurement of the breakup length of liquid jets in airblast atomisers using optical connectivity, electrical connectivity and shadowgraphy
Abstract A comparative examination of the optical connectivity, electrical connectivity and shadowgraphy techniques for the measurement of the break-up length of atomising liquid jets from a co-axial airblast atomiser is presented. The atomiser was...
2016 / Georgios Charalampous, Constantinos Hadjiyiannis, Yannis Hardalupas -
Development of planar pixel modules for the ATLAS high luminosity LHC tracker upgrade
Abstract The high-luminosity LHC will present significant challenges for tracking systems. ATLAS is preparing to upgrade the entire tracking system, which will include a significantly larger pixel detector. This paper reports on the development of...
2014 / P.P. Allport, J. Ashby, R.L. Bates, A. Blue, S. Burdin, et al. -
Quasi-static tensile behavior of large-diameter thin-walled Ti–6Al–4V tubes at elevated temperature
Abstract As promising light-weight and high-performance structure components, large-diameter thin-walled (LDTW) Ti–6Al–4V titanium alloy (TC4) bent tubes are needed most urgently in many industries such as aviation and aerospace. Warm bending may be ...
2015 / Zhijun Tao, He Yang, Heng Li, Xiaoguang Fan -
Preparation, microstructure and degradation performance of biomedical magnesium alloy fine wires
Abstract With the development of new biodegradable Mg alloy implant devices, the potential applications of biomedical Mg alloy fine wires are realized and explored gradually. In this study, we prepared three kinds of Mg alloy fine wires containing...
2014 / Jing Bai, Lingling Yin, Ye Lu, Yiwei Gan, Feng Xue, et al. -
Thickness dependent effects of solubility and surface phenomena on the hydrogen transport properties of sputtered Pd77%Ag23% thin film membranes
Abstract The hydrogen solubility and permeation in Pd77%Ag23% membranes have been determined as a function of temperature and membrane thickness. Unexpectedly, the solubility of hydrogen is found to systematically increase as the membrane thickness...
2014 / Nicla Vicinanza, Ingeborg-Helene Svenum, Live Nova Næss, Thijs A. Peters, Rune Bredesen, et al.