Materials engineering topic list of research papers
-
A Coupled Eulerian Lagrangian Model to Predict Fundamental Process Variables and Wear Rate on Ferrite-pearlite Steels
Abstract A coupled Eulerian-Lagrangian Finite Element model of the orthogonal cutting process was developed to predict the influence that ferrite-pearlite steel variants have on fundamental process variables and tool wear. As a case study, this...
2017 / M. Saez-de-Buruaga, J.A. Esnaola, P. Aristimuno, D. Soler, T. Björk, et al. -
Self-biased microwave ferromagnetic performance of patterned Ni80Fe20 thin films2016 / Ru Yang, Xiaomin Liu, Honglei Du, Nian X. Sun, Hwaider Lin, et al.
-
A case study on failure of AISI 347H stabilized stainless steel pipe in a petrochemical plant
Abstract In this study failure of AISI 347 stabilized stainless steel pipe after 60,000 of working in a petrochemical plant was investigated. Result showed that the main cause of failure was thermal stress fatigue. Fatigue cracks were formed at the...
2017 / M. Ghalambaz, M. Abdollahi, A. Eslami, A. Bahrami -
Development board of the autonomous semi-passive RFID transponder2016 / P. Jankowski-Mihułowicz, M. Węglarski, G. Pitera, D. Kawalec, W. Lichoń
-
Recent advances in additive-enhanced magnesium hydride for hydrogen storage
Abstract The discovery of new hydrogen storage materials has greatly driven the entire hydrogen storage technology forward in the past decades. Magnesium hydride, which has a high hydrogen capacity and low cost, has been considered as one of the...
2017 / Ying Wang, Yijing Wang -
Robust tribo-mechanical and hot corrosion resistance of ultra-refractory Ta-Hf-C ternary alloy films2017 / Luis Yate, L. Emerson Coy, Willian Aperador
-
Application of Anisotropic Thin Plate Theory for Development of Displacements for Silicon <111> Crystals Plates in Cylindrical Systems2016 / A. Javidinejad
-
Dependence of Solidification for Bi2Te3−xSex Alloys on Their Liquid States2017 / Yuan Yu, Zhan Wu, Oana Cojocaru-Mirédin, Bin Zhu, Xiao-Yu Wang, et al.
-
Processing of Zn-3Mg alloy by equal channel angular pressing for biodegradable metal implants
Abstract Zn-based alloys have been studied as new biodegradable metals owing to its slower corrosion rate compared to Mg-based alloys and its high potential for mechanical properties improvement. The present work attempts to improve mainly the...
2017 / Murtala Sule Dambatta, Sudin Izman, Denni Kurniawan, Hendra Hermawan -
Microstructure Refinement in W-Y2O3 Alloy Fabricated by Wet Chemical Method with Surfactant Addition and Subsequent Spark Plasma Sintering2017 / Zhi Dong, Nan Liu, Zongqing Ma, Chenxi Liu, Qianying Guo, et al.
-
Effect of trace addition of al on microstructure, texture and tensile ductility of Mg-6Zn-0.5Er alloy
Abstract The effects of trace addition of Al on the microstructure and mechanical properties of the as-extruded Mg-6Zn-0.5Er alloy were investigated in the present investigation. The results showed that the trace addition of Al affected the...
2016 / Xiaobing Zheng, Wenbo Du, Ke Liu, Zhaohui Wang, Shubo Li -
Stellar variability from Dome A, Antarctica2017 / Lingzhi Wang, L.M. Macri, B. Ma, L.F. Wang, M.C.B. Ashley, et al.
-
MOEMS Vibration Sensor with Organic Semiconductor Readout
Abstract We present a first proof of principle of applying organic semiconductors as key components in micro-mechanical vibration sensors. The mechanical part of the MOEMS sensor readout is etched into the device layer of an SOI chip and consists of ...
2017 / A. Kainz, W. Hortschitz, H. Steiner, Yi-Hong Hong, Chao-Hsuan Chen, et al. -
Unsteady heat and mass transfer in gels, used as media for immobilizing micro bio-objects2017 / Boris Pokusaev, Andrey Vyazmin, Sergey Karlov, Dmitry Nekrasov, Dmitry Skladnev
-
Thermo-mechanical characterization of construction material lightened by olive pomace2017 / Drifa Belkharchouche, Abla Chaker
-
Host–guest recognition on photo-responsive cell surfaces directs cell–cell contacts
We developed an efficient cell surface engineering method based on lipid-insertion and host–guest recognition. With this methodology, we tailored cell membranes with β-cyclodextrin and subsequently manipulated cell behaviors through introducing photo-switchable...
2017 / Peng Shi, Enguo Ju, Jiasi Wang, Zhengqing Yan, Jinsong Ren, et al. -
Effective Young’s modulus of the artificial muscle twisted by fishing lines: Analysis and experiment2015 / Donghua Yue, Xingyi Zhang, Jun Zhou, You-He Zhou
-
Getting to grips with automated prepreg handling2017 / Andreas Björnsson, Marie Jonsson, Daniel Eklund, Jan Erik Lindbäck, Mats Björkman
-
Mask-Less Direct-Writing Deposition of Lead-Free Piezoelectric Films for Microsystems
Abstract Piezoelectric films fabricated with lead-free piezoelectric inks by means of a mask-less Direct-Writing (DW) technique are presented. A lead-free piezoelectric material, K0.5Na0.5NbO3-δ (KNN), has been produced via Solid State Reaction...
2017 / Marco Ferrari, Simone Dalola, Vittorio Ferrari, Giulio Cordaro, Cinzia Cristiani, et al. -
Investigation of Spectral Lines Broadening in Femtosecond Laser Plasma Generated on the Surface of the Barium Water Solutions
Abstract The spectral lines broadening in femtosecond laser plasma generated by the 45 fs Ti:Sa laser pulses on the surface of the water solutions of Ba is investigated. Under the experimental conditions, determined the temperature of femtosecond...
2017 / M.Yu. Babiy, S.S. Golik, A.A. Ilyin, Yu.S. Biryukova, T.M. Agapova, et al.