Materials engineering topic list of research papers
-
Transient response of elastic bodies connected by a thin stiff viscoelastic layer with evanescent mass
Abstract We extend the study [1] devoted to the dynamic response of a structure made up of two linearly elastic bodies connected by a thin soft adhesive layer made of a Kelvin–Voigt-type nonlinear viscoelastic material to the cases of stiff and very ...
2016 / Christian Licht, Somsak Orankitjaroen, Ahmed Ould Khaoua, Thibaut Weller -
Fast detection of blood gases by solution gated organic field effect transistors
Abstract We characterize the electrochemical stability of the organic semiconductor Dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene (DNTT) in aqueous solutions. Electrochemical stability of DNTT in solution is validated by cyclic voltammetry and...
2016 / Franz X. Werkmeister, Bert A. Nickel -
Vapor-deposited hydrogenated and oxygen-deficient molybdenum oxide thin films for application in organic optoelectronics
Abstract Vapor-deposited molybdenum oxide films are used as low resistance anode interfacial layers in applications such as organic light emitting diodes (OLEDs) and organic photovoltaics (OPVs). A versatile method for the vapor deposition of...
2013 / Maria Vasilopoulou, Ioannis Kostis, Antonios M. Douvas, Dimitra G. Georgiadou, Anastasia Soultati, et al. -
IEA SHC Task 42 / ECES Annex 29 – Working Group B: Applications of Compact Thermal Energy Storage
Abstract The IEA joint Task 42 / Annex 29 is aimed at developing compact thermal energy storage materials and systems. In Working Group B, experts are working on the development of compact thermal energy storage applications, in the areas cooling,...
2016 / Wim van Helden, Motoi Yamaha, Christoph Rathgeber, Andreas Hauer, Fredy Huaylla, et al. -
Evaluation of the mechanical performance of silicon carbide in TRISO fuel at high temperatures
Abstract The HTR design envisions fuel operating temperatures of up to 1000°C and in case of an accident even 1600°C are conceivable. To ensure safety in all conditions a thorough understanding of the impact of an extreme temperature environment is...
2016 / Nadia Rohbeck, Ping Xiao -
The 2016 oxide electronic materials and oxide interfaces roadmap2016 / M Lorenz, M S Ramachandra Rao, T Venkatesan, E Fortunato, P Barquinha, et al.
-
Effect of the Annealing Temperature on the Microstructure and Properties of Ausferritic Nodular Cast Iron2016 / G. Gumienny, L. Klimek, B. Kurowska
-
The investigation of influence of tool wear on ductile to brittle transition in single point diamond turning of silicon
Abstract Single point diamond turning (SPDT) of large functional surfaces on silicon remains a challenge owing to severe diamond tool wear. Recently, tremendous efforts have been made in understanding the machining mechanics, especially wear...
2016 / Amir Mir, Xichun Luo, Jining Sun -
Growth and oxidization stability of cubic Zr1−xGdxN solid solution thin films2015 / C. Höglund, B. Alling, J. Jensen, L. Hultman, J. Birch, et al.
-
Impact of doping on InAs/GaAs quantum-dot solar cells: A numerical study on photovoltaic and photoluminescence behavior
Abstract We investigate the effect of doping on quantum dot (QD) solar cells by analysing their behavior in terms of photovoltaic characteristic, external quantum efficiency, and photoluminescence (PL) at room temperature. The analysis addresses the ...
2016 / F. Cappelluti, M. Gioannini, A. Khalili -
Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials
Abstract A novel equiatomic TiNbTaZrMo high-entropy alloy (HEA) was developed as a new metallic biomaterial. The constituent elements of the HEA were biocomparable, and the HEA was designed based on parameters such as the mixing enthalpy (ΔH ...
2016 / Mitsuharu Todai, Takeshi Nagase, Takao Hori, Aira Matsugaki, Aiko Sekita, et al. -
Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: A quantitative study
Abstract The effect of prismatic plates on the mechanical behaviour at low and high temperature of a Mg-1 wt.% Mn- 1 wt%Nd alloy was determined. For this purpose, a weakly textured extruded bar, exhibiting similar values for the critical resolved...
2016 / P. Hidalgo-Manrique, J.D. Robson, M.T. Pérez-Prado -
Controlling the work hardening of martensite to increase the strength/ductility balance in quenched and partitioned steels
Abstract The role of retained austenite on tensile behavior in quenched and partitioned (Q&P) steels has been studied extensively, but the deformation behavior of martensite, which comprises the majority of Q&P microstructures, has received...
2016 / K.O. Findley, J. Hidalgo, R.M. Huizenga, M.J. Santofimia -
Role of the Continuous Casting Forms on the Shape of the Solidified Crust / Wpływ Geometrii Formy Na Kształt Frontu Krzepnięcia Przy Odlewaniu Ciągłym2016 / Z. Lipnicki, K. Pantoł
-
Effects of external stress on biodegradable orthopedic materials: A review
Abstract Biodegradable orthopedic materials (BOMs) are used in rehabilitation and reconstruction of fractured tissues. The response of BOMs to the combined action of physiological stress and corrosion is an important issue in vivo since...
2016 / Xuan Li, Chenglin Chu, Paul K. Chu -
Corona charging of polymers: recent advances on constant current charging2005 / José A. Giacometti, Sergei Fedosov, Mauro M. Costa
-
Co-seismic changes of Wenchuan Ms8.0 earthquake and six aftershocks recorded by four deformation instruments at Xuzhou seismostation
Abstract: Co-seismic changes of Wenchuan Ms8.0 earthquake and six strong aftershocks were recorded by 4 digital deformation instruments at Xuzhou seismostation at an epicentral distance of 1392 km. The result shows that the strain-step changes and...
2015 / Zheng Jiangrong, Wang Jun, Xu Ge, Jiang Haolin -
Generating tissue-engineered intestinal epithelium from cultured Lgr5 stem cells in vivo
Abstract Introduction Generating tissue-engineered small intestine (TESI) from mature intestinal cells has been established in a mouse model. The purpose of this study was to generate TESI from Lgr5 stem cells in vivo. ...
2016 / Zhassulan Baimakhanov, Yasuhiro Torashima, Akihiko Soyama, Yusuke Inoue, Yusuke Sakai, et al. -
Grain size and microhardness evolution during annealing of a magnesium alloy processed by high-pressure torsion
Abstract High-pressure torsion (HPT) was used to impose severe plastic deformation on a magnesium alloy AZ31. The material was processed for 0.5, 1, 2, 3, 5 and 7 turns at room temperature under a pressure of 6.0GPa. Samples were annealed for 1800s...
2014 / Livia Raquel C. Malheiros, Roberto Braga Figueiredo, Terence G. Langdon -
Recent discoveries concerning the tumor - mesenchymal stem cell interactions
Abstract Tumor microenvironment plays a crucial role in coordination with cancer cells in the establishment, growth and dissemination of the tumor. Among cells of the microenvironment, mesenchymal stem cells (MSCs) and their ability to evolve into...
2016 / Lazennec Gwendal, Lam Paula Y