Materials engineering topic list of research papers
-
Aspects and Impacts of Ship Recycling in Bangladesh
Abstract In this paper, overall ship recycling process in Bangladesh has been investigated and a comparison has been shown between Bangladesh and Rest of World on ship recycling activities. Furthermore the economic and environmental impact due to...
2017 / Sohanur Rahman -
Preparation of silicon carbide/carbon fiber composites through high-temperature spark plasma sintering
Abstract This study discusses the potentials of spark plasma sintering (SPS) integrated with high temperature process that can enable sintering of SiC/Cf composites without any sintering aids. The random distribution of carbon fibers was obtained...
2017 / Ehsan Ghasali, Masoud Alizadeh, Amir Hossein Pakseresht, Touradj Ebadzadeh -
Morphology transition of the primary silicon particles in a hypereutectic A390 alloy in high pressure die casting2017 / J. Wang, Z. Guo, J. L. Song, W. X. Hu, J. C. Li, et al.
-
Crystal structure of 9-ethyl-3-[(E)-2-(thiophen-2-yl)vinyl]-9H-carbazole, C20H17NS2014 / Guohui Zhang, Yunlong Deng, Duxia Cao, Zhiqiang Liu
-
An Analysis of Microstructure and Mechanical Properties on Friction Stir Welded Joint of Dissimilar 304 Stainless Steel and Commercially Pure Aluminium2017 / M. Balamagendiravarman, S. Kundu, S. Chatterjee
-
Incorporation of the Pore Size Variation to Modeling of the Elastic Behavior of Metallic Open-Cell Foams2017 / K. Ćwieka, T. Wejrzanowski, K. J. Kurzydłowski
-
Optimization of the Q-P Process Parameters for Low Alloyed Steels with 0.2% C2014 / H. Jirková, L. Kučerová, D. Aišman, B. Mašek
-
Mathematical Modelling Stress Distribution in a Metallic Plate with an Asymmetrical Notch2016 / Sergey Konovalov, Irina Komissarova, Dmitry Kosinov, Xizhang Chen, Victor Gromov
-
XRD and EBSD Measurements of Directional Solidification Fe-C Eutectic Alloy2016 / M. Trepczyńska-Łent
-
Role of hydrogen carrier gas on the growth of few layer hexagonal boron nitrides by metal-organic chemical vapor deposition2017 / Dong Yeong Kim, Nam Han, Hokyeong Jeong, Jaewon Kim, Sunyong Hwang, et al.
-
Surface Generation Modelling for Micro end Milling Considering the Minimum Chip Thickness and Tool Runout
Abstract Surface roughness is considered as one of the significant factors on the quality and functionality of micro components. Considering that in micro milling feed per tooth and uncut chip thickness are very small compared to those in...
2017 / Wanqun Chen, Dehong Huo, Xiangyu Teng, Yazhou Sun -
Nonwovens from Recycled Carbon Fibres – Comparison of Processing Technologies
Abstract The presented study addresses the production of semi-finished products based on recycled carbon fibres (rCF). Influences of different parameters are investigated on both process routes – the dry laying and the wet laying process. Two...
2017 / Jakob Wölling, Maren Schmieg, Frank Manis, Klaus Drechsler -
Power Generation from Low Grade Heat Using Trilateral Flash Cycle
Abstract Though the world is suffering from energy crisis, a large amount of low grade heat (temperature lower than 100̊C) is being wasted for the lack of availability of cost effective technology. Recovery of waste heat is drawing the attention of...
2017 / Md Arbab Iqbal, Mahdi Ahmadi, Farah Melhem, Sohel Rana, Aliakbar Akbarzadeh, et al. -
Bond between TRM versus FRP composites and concrete at high temperatures
Abstract The use of fibre reinforced polymers (FRP) as a means of external reinforcement for strengthening the existing reinforced concrete (RC) structures nowadays is the most common technique. However, the use of epoxy resins limits the...
2017 / Saad M. Raoof, Dionysios A. Bournas -
Investigation of the External Pressure Coefficients on the Facade of the Triangular High-Rise Structure with Curved Corners
Abstract The paper deals with the analysis of external pressure coefficients on the facade of high-rise building structure. The structure has shape of a triangle with curved corners. Analysis was performed mainly as an experimental study carried out ...
2017 / Norbert Jendzelovsky, Roland Antal, Lenka Konecna -
Joining of hybrid AA6063-6SiC p -3Gr p composite and AISI 1030 steel by friction welding
Abstract Joining of metals and aluminium hybrid metal matrix composites has significant applications in aviation, ship building and automotive industries. In the present work, investigation is carried out on Friction Welding of AISI 1030 steel and...
2017 / N. Rajesh Jesudoss Hynes, M. Vivek Prabhu, P. Nagaraj -
Vibration Attenuation at Rail Joints through under Sleeper Pads
Abstract Modern railway tracks require electrification to power the trains and signaling systems to detect near real-time location of trains on railway networks. Such systems require the rail to carry and return the residual electricity back to...
2017 / Sakdirat Kaewunruen, Akira Aikawa, Alex M. Remennikov -
Model of the Evolution of Deformation Defects and Irreversible Strain at Thermal Cycling of Stressed TiNi Alloy Specimen2015 / Aleksandr E. Volkov, Fedor S. Belyaev, Margarita E. Evard, Natalia A. Volkova
-
Mechanical analysis of surface-coated zircaloy cladding
Abstract A structural model for stress distributions of coated Zircaloy subjected to realistic incore pressure difference, thermal expansion, irradiation-induced axial growth, and creep has been developed in this study. In normal operation, the...
2017 / Youho Lee, Jeong Ik Lee, Hee Cheon NO -
Mechanical Fracture Properties of Alkali-Activated Slag with Graphite Filler
Abstract Alkali-activated slag is a building material considered as alternative to ordinary Portland cement based materials. Addition of graphite powder increases its electric conductivity, hence, introducing new functionality to building materials...
2017 / Pavel Rovnaník, Hana Šimonová, Libor Topolář, Zbyněk Keršner