Materials engineering topic list of research papers
-
Preparation of the multifunctional antireflective films from a templating composite silica sol with entwining structures
Abstract Antireflective (AR) films were prepared by the sol–gel method and dip-coating process by using tetraethylorthosilicate (TEOS) as silica precursor. Silica nanoparticle (SiO2-NP) sol was first synthesized via classical Stöber method, and then ...
2013 / Xiaoshan Meng, Yan Wang, Hongning Wang, Jing Zhong, Ruoyu Chen -
Effect of aluminum-foam heat sink on inclined hot surface temperature in the case of free convection heat transfer
Abstract The need to more powerful electronic chips cause more heat generation as a consequence. So it leads to apply metal foam heat sink as a powerful cooling methods. The objective of this paper is to experimentally investigate the effect of...
2017 / M. Paknezhad, A.M. Rashidi, T. Yousefi, Z. Saghir -
Effect of the sulfur and fluorine concentration on physical properties of CdS films grown by chemical bath deposition
Abstract Undoped and F-doped CdS thin films were grown on glass slides by chemical bath deposition using thiourea, cadmium acetate and ammonium fluoride as sulfur, cadmium, and fluorine sources, respectively. Undoped CdS films were deposited varying ...
2017 / K.E. Nieto-Zepeda, A. Guillén-Cervantes, K. Rodríguez-Rosales, J. Santos-Cruz, D. Santos-Cruz, et al. -
Monitoring of Transport Tunnel Deformation at the Construction Stage
Abstract The analysis of normative documents related to geodetic support of transport tunnel construction showed that for now there are no integral monitoring methods providing surface tunnel structure observation. Therefore, the authors...
2017 / M.Y. Bryn, D.A. Afonin, N.N. Bogomolova, A.A. Nikitchin -
Microstructure of Cast High-Manganese Steel Containing Titanium2016 / G. Tęcza, A. Garbacz-Klempka
-
Simulated Vibrational Analysis of Internally Fixated Femur to Monitor Healing at various Fracture Angles
Abstract Finite element analysis has been performed to investigate the feasibility of using modal analysis to determine whether an internally fixated femur is healing. Two types of fixation are investigated, an intramedullary nail(IM) and a plate...
2017 / W.K. Chiu, W.H. Ong, M. Russ, M. Fitzgerald -
High performance photolithographically-patterned polymer thin-film transistors gated with an ionic liquid/poly(ionic liquid) blend ion gel2017 / Q. Thiburce, L. Porcarelli, D. Mecerreyes, A. J. Campbell
-
Micro-seeding and soft template effects on the control of polymorph and morphology of HMX micro particles in solvent-antisolvent process
Abstract A seeding strategy was developed in the preparation of cyclotetramethylenetetranitramine (HMX) explosive micro-particles by solvent-antisolvent method, to control their polymorphs from dangerous gamma (γ) type to the desired and standard...
2017 / Sajjad Damiri, Shahriar Namvar, Hadi Panahi -
Ferromagnetism in proton irradiated 4H-SiC single crystal2015 / Ren-Wei Zhou, Xue-Chao Liu, Hua-Jie Wang, Wei-Bin Chen, Fei Li, et al.
-
Direct influence of recovery behaviour on mechanical properties in oxygen-free copper processed using different SPD techniques: HPT and ECAP
Abstract Oxygen-free copper of 99.95wt.% purity was severely deformed at room temperature by two modes of severe plastic deformation, equal-channel angular pressing (ECAP) and high-pressure torsion (HPT). ECAP was performed using 4, 16 and 24...
2017 / Meshal Y. Alawadhi, Shima Sabbaghianrad, Yi Huang, Terence. G. Langdon -
Ferroelectric polarization induces electronic nonlinearity in ion-doped conducting polymers2017 / Simone Fabiano, Negar Sani, Jun Kawahara, Loïg Kergoat, Josefin Nissa, et al.
-
Vibration-based Structural Health Assessment of a Wind Turbine Tower Using a Wind Turbine Model
Abstract Wind turbine towers play an important role in supporting the energy-generating components such as blades, hubs, and nacelles and in resisting wind loads generated by the blades. Therefore, it is essential to secure the structural safety and ...
2017 / Wonsul Kim, Jin-Hak Yi, Jeong-Tae Kim, Jae-Hyung Park -
Giant linear strain gradient with extremely low elastic energy in a perovskite nanostructure array2017 / Y. L. Tang, Y. L. Zhu, Y. Liu, Y. J. Wang, X. L. Ma
-
Stiff, light, strong and ductile: nano-structured High Modulus Steel2017 / H. Springer, C. Baron, A. Szczepaniak, V. Uhlenwinkel, D. Raabe
-
Lead-free piezoelectric KNN-BZ-BNT films with a vertical morphotropic phase boundary2015 / Wen Chen, Jinyan Zhao, Lingyan Wang, Wei Ren, Ming Liu
-
Remote Instrumental Monitoring of Interchamber Pillar Stability
Abstract In the exploitation of water-soluble ore deposits, of particular importance is the preservation of the impermeability of the waterproofing layers. This is achieved by using a heading-and-stall method with a rigid pillar which excludes sharp ...
2017 / A. Evseev, A. Baryakh, P. Butirin -
Tool Deflection Control by a Sensory Spindle Slide for Milling Machine Tools
Abstract A conventional spindle slide of a milling center is enhanced to a force “feeling” component for process monitoring and control tasks. The feeling ability is realized by integrating strain gauges in notches machined into the structure. This...
2017 / Berend Denkena, Dominik Dahlmann, Haythem Boujnah -
Analysis of shearing deformation in rolling-spinning forming of Ti-6Al-2Zr-1Mo-1V tubes2015 / Jing Guo, Mei Zhan, He Yang
-
A3 Method as a Powerful Tool for Searching and Implementing Green Innovations in an Industrial Company Transport
Abstract The A3 method is a systematic problem solving and continuous improvement approach, which was first employed at the company Toyota. The paper presents possibilities of using the method for searching and effective implementing green...
2017 / Radim Lenort, David Staš, David Holman, Pavel Wicher -
Coherent diffraction microscopy at SPring-8: instrumentation, data acquisition and data analysis2011 / Rui Xu, Sara Salha, Kevin S. Raines, Huaidong Jiang, Chien-Chun Chen, et al.