Materials engineering topic list of research papers
-
Evolution of Mechanical Anisotropy in Nano-scale Metallic-glass thin Films Under Indentation
Abstract The mechanical behavior of Cu-Zr-Al metallic-glass thin films under indentation was studied with the molecular dynamics simulation methodology to investigate changes of microstructures through degrees of elastic anisotropy. In this work,...
2014 / Yun-Che Wang, Chun-Yi Wu -
Nanostructured laminar tungsten alloy with improved ductility by surface mechanical attrition treatment2017 / Hong-Yan Guo, Min Xia, Lap-Chung Chan, Kun Wang, Xiao-Xin Zhang, et al.
-
The role of particle ripening on the creep acceleration of Nimonic 263 superalloy2014 / Giuliano Angella, Riccardo Donnini, Dario Ripamonti, Maurizio Maldini
-
Effect of Aging Temperature on Corrosion Behavior of Sintered 17-4 PH Stainless Steel in Dilute Sulfuric Acid Solution2017 / Aneta Szewczyk-Nykiel, Jan Kazior
-
Performance evaluation of a magnetic field measurement NDE technique using a model assisted Probability of Detection framework
Abstract Receiver Operating Characteristics (ROC) are a powerful tool used to evaluate the performance of NDE methods; however, the need to manufacture and scan many test pieces with realistic defects means that they are expensive and time-consuming ...
2017 / Rollo Jarvis, Peter Cawley, Peter B. Nagy -
Effects of Potassium and Manganese Promoters on Nitrogen-Doped Carbon Nanotube-Supported Iron Catalysts for CO 2 Hydrogenation
Abstract Nitrogen-doped carbon nanotubes (NCNTs) were used as a support for iron (Fe) nanoparticles applied in carbon dioxide (CO2) hydrogenation at 633K and 25 bar (1 bar = 105 Pa). The Fe/NCNT catalyst promoted with both potassium (K) and...
2017 / Praewpilin Kangvansura, Ly May Chew, Chanapa Kongmark, Phatchada Santawaja, Holger Ruland, et al. -
Internal friction behaviors of Ni-Mn-In magnetic shape memory alloy with two-step structural transformation
Abstract The internal friction (IF) behaviors of dual-phase Ni52Mn32In16 alloy with two-step structural transformation were investigated by dynamic mechanical analyzer. The IF peak for the martensite transformation (MT) is an asymmetric shoulder...
2017 / Zhen-ni Zhou, Liang Yang, Jun-ge Wang, Tianfan Jin, Yujin Huang, et al. -
Issue Information2016 /
-
Nanoscale spheroidized cementite induced ultrahigh strength-ductility combination in innovatively processed ultrafine-grained low alloy medium-carbon steel2017 / N. Jia, Y. F. Shen, J. W. Liang, X. W. Feng, H. B. Wang, et al.
-
Non-destructive detection of cross-sectional strain and defect structure in an individual Ag five-fold twinned nanowire by 3D electron diffraction mapping2017 / Xin Fu, Jun Yuan
-
Surfactant-less Sol-Gel Technique for the Synthesis of Mg-ZnO Nanoparticle2017 / Wafaa A. Kadhim, Mohd Hasbi Bin Ab. Rahim
-
Measurement of Silver Nanolayer Absorption by the Body in an in Vivo Model of Inflammatory Gastrointestinal Diseases2016 / Krzysztof Siczek, Wojciech Pawlak, Hubert Zatorski, Jakub Fichna
-
Voltage transients in thin-film InSb Hall sensor
Abstract The work is reached to study temperature transients in thin-film Hall sensors. We experimentally study InSb thin-film Hall sensor. We find transients of voltage with amplitude about 10 ...
2017 / Alexey Bardin, Vyacheslav Ignatjev, Andrey Orlov, Sergey Perchenko -
Combination of gravity concentration variables to increase the productivity of the Brucutu mineral processing plant
Abstract The jigging process is one of the oldest ways used to concentrate ores in the world, suitable for small and medium-sized employability, and is composed of a pre-concentration step as a way to reduce costs. Within this perspective, a test...
2017 / Fábio de São José, Hemerson Oliveira Barcelos, Carlos Alberto Pereira -
Optimisation of blade type spreaders for powder bed preparation in Additive Manufacturing using DEM simulations
Abstract Powders used in the Particle Bed Fusion process are spread onto compact layers and are then fused to generate a layer of the final part. This process is repeated layer-upon-layer to form the final product. It has recently been demonstrated...
2017 / S. Haeri -
Effect Of Drill String Rotation On The Dynamic Response Of Drilling Risers2015 / I.E. Major, A. Big-Alabo, S. Odi-Owei
-
Influence of Processing Parameters and Different Content of Tib2 Ceramics on the Properties of Composites Sintered by High Pressure -High Temperature (HP-HT) Method2014 / I. Sulima, L. Jaworska, P. Figiel
-
Research Update: Synthesis of sub-15-nm diameter silver nanowires through a water-based hydrothermal method: Fabrication of low-haze 2D conductive films2017 / Hae-Won Jang, Yong-Hoe Kim, Ki-Wook Lee, Yoon-Mi Kim, Jin-Yeol Kim
-
Physical, thermal, and mechanical properties of polypropylene composites filled with rattan nanoparticles
Abstract Natural fillers are recognized as the materials that feature a poor fiber/matrix interaction. As a result, their composites behaviors are directly compromised. Existing evidence has exhibited that nanoparticle fillers can be employed as an...
2017 / Siti Nikmatin, Achmad Syafiuddin, Ahmad Beng Hong Kueh, Akhiruddin Maddu -
Carbon Capture Powered by Solar Energy
Abstract The urgent implementation of emissions control measures is inhibited in part by the expense of carbon capture technology. A large part of the cost of amine based approaches is in the heat regeneration of the absorbent. An alternative way to ...
2017 / Robert Bennett, Sarah Clifford, Kenrick Anderson, Graeme Puxty