Materials engineering topic list of research papers
-
Features of SRP Tapes against CFRP Composites Used for Strengthening of Concrete Structures
Abstract SRP (Steel Reinforced Polymer) tapes used as a reinforcement of externally bonded composite strengthening are representing a relatively new material, competitive to popular organic fibers. SRP tapes are based on ultra-high strength steel...
2017 / Rafał Krzywoń, Marcin Górski, Szymon Dawczyński -
Heat Transfer Lab Kit using Temperature Sensor based Arduino TM for Educational Purpose
Abstract Nowadays, an integration of the sensor-based technology to learning science is required in order to improve the quality of science teaching especially for the better physical measurement quality. The utilization of sensor technology...
2017 / Eka Cahya Prima, Saeful Karim, Setiya Utari, Rahmat Ramdani, Eneng Riska Rahayu Putri, et al. -
Mechanism of Serrated Chip Formation in Cutting Process Using Digital Image Correlation Technique
Abstract Serrated chip, one of the major chip types in cutting process influences the quality of machined surface. However, the dynamic evolution of the serrated chip can hardly been quantitatively investigated, especially the fields of strain and...
2017 / Wen-Jie Xu, Xiao-Ming Zhang, Jürgen Leopold, Han Ding -
Economic assessment of different operational reactor cycle structures in a pulsed DEMO-like power plant
Abstract The operative cycle of a pulsed fusion power plant is composed by a sequence of phases whose duration cannot be arbitrarily chosen due to both technical and physical constraints. A pulsed DEMO-like power plant is modeled with the FRESCO...
2017 / Chiara Bustreo, Daniele Maggio, Fulvio Auriemma, Giuseppe Zollino -
PEMFC Two-Dimensional Modelling of Reactant Species Transport Through Membrane - GDL System
Abstract A proton exchange membrane (PEM) fuel cell has many distinctive features, like quick start-up, high power density, zero emissions and system robustness, which makes it an attractive alternative clean energy source. Comsol Multiphysics, a...
2017 / Viorel Ionescu -
Semi-Solid Joining of Aluminium and Carbon Fabric
Abstract In the context of today's lightweight design, an innovative joining technique was developed at the Institute for Metal Forming Technology/Stuttgart for combining aluminium sheets and carbon fabrics. Two aluminium sheets with a carbon fabric ...
2017 / Lukas Marx, Mathias Liewald -
Hybrid fluorescent layer emitting polarized light2017 / Mohammad Mohammadimasoudi, Jeroen Beeckman, Zeger Hens, Kristiaan Neyts
-
Placing of the Onboard Equipment of Space Vehicles Taking the Influence of External Factors into Account
Abstract In the design process, when placing the on-board equipment of a spacecraft in the compartments of a minimum volume, along with the design and technological constraints the possible impact of the space environment must be taken into account. ...
2017 / A.I. Shulepov -
Blank size dependence of microstructure in radial-axial ring rolling of TA15 titanium alloy by macro-micro FE simulation2015 / Lianggang Guo, Shuai Zhu, He Yang
-
Applications and Comparison of Continuous Wavelet Transforms on Analysis of A-wave Impulse Noise2016 / Jun Qin, Pengfei Sun
-
Microstructural origins of high strength and high ductility in an AlCoCrFeNi 2.1 eutectic high-entropy alloy
Abstract Recent studies indicate that eutectic high-entropy alloys can simultaneously possess high strength and high ductility, which have potential applications in industrial fields. Nevertheless, microstructural origins of the excellent...
2017 / Xuzhou Gao, Yiping Lu, Bo Zhang, Ningning Liang, Guanzhong Wu, et al. -
Structural, Mechanical and Thermodynamic Properties under Pressure Effect of Rubidium Telluride: First Principle Calculations2017 / K. Bidai, M. Ameri, I. Ameri, D. Bensaid, A. Slamani, et al.
-
Influence of rare-earth additives (La, Sm and Dy) on the microstructure and dielectric properties of doped BaTiO3 ceramics2010 / Vesna Paunovic, Lj. Zivkovic
-
A procedure to estimate the dynamic damped behavior of fiber reinforced composite beams submitted to flexural vibrations2005 / Volnei Tita, Jonas de Carvalho, João Lirani
-
Modeling of a Dielectric Elastomer Bender Actuator2014 / Paul White, Stella Latscha, Mark Yim
-
Synthesis and Piezoelectric Properties of Pb<sub>0.98</sub>Sm<sub>0.02</sub>[(Zr<sub>y</sub>,Ti<sub>1–y</sub>)<sub>0.98</sub>(Fe<sub>1/2</sub><sup>3+</sup>,Nb<sub>1/2</sub><sup>5+</sup>)<sub>0.02</sub>]O<sub>3</sub> Ceramics2012 / Fares Kahoul, Louanes Hamzioui, Nora Abdessalem, Ahmed Boutarfaia
-
An adaptive relay node selection algorithm based on opportunity2017 / Baoju Zhang, Cuiping Zhang, Jiasong Mu, Wei Wang, Jiazu Xie
-
Numerical model of the nanoindentation test based on the digital material representation of the Ti/TiN multilayers2015 / Konrad Perzyński, Radosław Wiatr, Łukasz Madej
-
The Concept of Slag Decopperisation in the Flash Furnace Process by Use of Complex Reagents2015 / A.W. Bydałek, A. Bydałek, W. Wołczyński, S. Biernat
-
Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser2008 / Milton Sergio Fernandes de Lima, Flávia Aline Goia, Rudimar Riva, Ana Maria do Espírito Santo