Materials engineering topic list of research papers
-
Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling
Abstract The melt pool dynamics consideration in the numeric modeling of the Laser Material Deposition (LMD) process can be enormously difficult and expensive, especially if this calculation is not strictly necessary. The increased cost comes mainly ...
2017 / Jon Iñaki Arrizubieta, Aitzol Lamikiz, Fritz Klocke, Silvia Martínez, Kristian Arntz, et al. -
Failure Investigation: in Flight Loss of a Main Landing Gear Door of a Transport Aircraft
Abstract: An executive transport military aircraft experienced the loss of the left main landing gear door during a standard flight. In the aftermath of this serious occurrence, at the Chemistry Department of the Flight Test Center of the Italian...
2017 / G. Zucca, V. di Francesco, M. Bernabei, F. De Paolis -
Determination of Material Resistance Characteristics in Cutting
Abstract It is proposed in this paper to use the specific deformation work considering the correlation between the strain, the strain rate of the cutting material and the cutting temperature as a characteristic of material resistance to cutting in...
2017 / Valerii Kushner, Michael Storchak -
Procedure for Generating a Basis for PPC Systems to Schedule the Production Considering Energy Demand and Available Renewable Energy
Abstract Production planning and controlling (PPC) plays an important role in modern production enterprises. Current production management systems consider resources such as material, labour and production capacity and their respective costs, but...
2017 / Agnes Pechmann, Maximilian Zarte -
Production of porous Ni-Ti alloy and test of its biocompatibility under in-vivo conditions2011 / Ali Kaya Gur, Nuri Orhan, Emine Unsaldı, Ali Said Durmuş, Neriman Çolakoğlu
-
Abnormal gas-liquid-solid phase transition behaviour of water observed with in situ environmental SEM2017 / Xin Chen, Jiapei Shu, Qing Chen
-
Oriented Nucleation of both Ge-Fresnoite and Benitoite/BaGe4O9 during the Surface Crystallisation of Glass Studied by Electron Backscatter Diffraction2016 / Wolfgang Wisniewski, Marek Patschger, Steliana Murdzheva, Christian Thieme, Christian Rüssel
-
Effect of nonlinear and noncollinear transformation strain pathways in phase-field modeling of nucleation and growth during martensite transformation2017 / Pengyang Zhao, Chen Shen, Ju Li, Yunzhi Wang
-
Process Parameter Optimization for Hot Embossing Uniformly Textured UHMWPE Surfaces for Orthopedic Bearings
Abstract To improve wear properties and reduce friction in orthopedic bearings, UHMWPE surface texturing is a proposed approach to retain fluid, reduce stress in the polymer and promote lubrication in the joint. The objective of this study was to...
2017 / Christina Ippolito, Sufujiang Yu, Yong Jun Lai, Tim Bryant -
Surface effects on static bending of nanowires based on non-local elasticity theory
Abstract The surface elasticity and non-local elasticity effects on the elastic behavior of statically bent nanowires are investigated in the present investigation. Explicit solutions are presented to evaluate the surface stress and non-local...
2015 / Quan Wu, Alex A. Volinsky, Lijie Qiao, Yanjing Su -
Prediction and characterization of heat-affected zone formation in tin-bismuth alloys due to nickel-aluminum multilayer foil reaction2015 / R. J. Hooper, C. G. Davis, P. M. Johns, D. P. Adams, D. Hirschfeld, et al.
-
Investigation on magnesium degradation under flow versus static conditions using a novel impedance-driven flow apparatus
Abstract This article reports a novel impedance-driven flow apparatus and its applicability for studying magnesium degradation under flow versus static conditions. Magnesium has potential to be an effective biomaterial for use inside the human body...
2014 / Elbert David Mai, Huinan Liu -
Interaction model of steel ladle of continuous caster in steel works2016 / Bang Fu Huang, Zhi Wei Ma, Nai Yuan Tian, Zhe Shi, Xiao Lei Zhou, et al.
-
Photoluminescence and radioluminescence in Pr-doped lanthanum aluminoborate glasses
Abstract Photoluminescence (PL) and radioluminescence properties of Pr-doped lanthanum aluminoborate glasses with the composition xPr-20La2O3-30Al2O3-50B2O3 (0≤ x ≤1.0) were studied. In the PL spectra, the...
2017 / Shunichi Kaneko, Hirokazu Masai, Go Okada, Noriaki Kawaguchi, Takayuki Yanagida -
A full-scale hydrodynamic simulation of energetic component system
Abstract A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A series of small scale gap tests and detailed hydrodynamic simulations were...
2017 / Bohoon Kim, Seung-gyo Jang, Jack J. Yoh -
Theoretical and experimental investigation of surface acoustic wave propagation on a hollow spherical shell using laser ultrasound2016 / Xiaojun Ma, Xing Tang, Zongwei Wang, Dangzhong Gao, Yongjian Tang
-
Stacking-fault strengthening of biomedical Co–Cr–Mo alloy via multipass thermomechanical processing2017 / Kenta Yamanaka, Manami Mori, Shigeo Sato, Akihiko Chiba
-
Markov Chain Monte Carlo Simulation Methods for Structural Reliability Analysis
Abstract Two Markov chain Monte Carlo simulation methods for reliability estimation, subset simulation and the moving particles algorithm, are compared. To this end, both low-dimensional and high-dimensional test cases are considered. The...
2017 / Carsten Proppe -
Evolutionary frequency response function of linear systems subjected to earthquake accelerograms using the adaptive chirplet decomposition
Abstract In seismic engineering, in order to reproduce the typical characteristics of real earthquakes ground-motion time history, several approaches has been proposed in literature. In this study the adaptive chirplet signal decomposition is...
2017 / T. Alderucci, F. Giunta, G. Muscolino -
The dynamics of an infinite uniform Euler-Bernoulli beam on bilinear viscoelastic foundation under moving loads
Abstract The relation between the wheel load and the rail deflection takes a nonlinear shape which can be approximated as two piecewise linear functions (bilinear characteristic). The paper deals with the response of an infinite uniform...
2017 / Traian Mazilu