Materials engineering topic list of research papers
-
X-ray computed tomography of polymer composites
Abstract The use of X-ray computed tomography (CT), exploiting both synchrotron and laboratory sources, has grown significantly over the last decade, driven primarily by improvements in spatial resolution, reduction in acquisition time and the...
2017 / S.C. Garcea, Y. Wang, P.J. Withers -
Formation of microstructure and properties of Cu-3Ti alloy in thermal and thermomechanical processes2017 / A. Szkliniarz
-
Mixed phase Ge2Sb2Te5 thin films with temperature independent resistivity2013 / S. Privitera, C. Garozzo, A. Alberti, L. Perniola, B. De Salvo
-
Investigation of Ni-and Ti-content influence on microstructure and phase transformation behavior of NiTi SMA alloyed with Ag2015 / Gilberto Álvares da Silva, Jorge Otubo
-
Phosphorylation and acetylation modifications of FOXO3a: Independently or synergistically? (Review)2017 / Xianwang Wang, Shujuan Hu, Lei Liu
-
Review of high and ultrahigh performance cementitious composites incorporating various combinations of fibers and ultrafines
Abstract The outcomes of the research in modern cementitious composites have paved the way for their wide use in construction industry. The introduction of short, discontinuous and randomly distributed fibers to these composites has altered their...
2017 / M.I. Khan, Y.M. Abbas, G. Fares -
Controllable crystal growth and fast reversible crystallization-to-amorphization in Sb2Te-TiO2 films2017 / Guoxiang Wang, Chao Li, Daotian Shi, Qiuhua Nie, Hui Wang, et al.
-
Measurements of Surface Texture Parameters After Ultrasonic Assisted and Conventional Grinding of ZrO 2 Based Ceramic Material Characterized by Different States of Sintering
Abstract The article presents the results of measurements of surface texture parameters after ultrasonic assisted grinding (UAG) and conventional grinding (CG) of ZrO2 based ceramic material. The machined samples are characterized by different...
2017 / Roman Wdowik, Janusz Porzycki, Marek Magdziak -
Updates on the development of nanostructured transition metal nitrides for electrochemical energy storage and water splitting
There are wide interests in developing high-performance electrode materials for electrochemical energy storage and conversion devices. Among them, transition metal nitrides (TMNs) are suitable for a wide range of devices because they have better electrical...
2017 / Muhammad-Sadeeq Balogun, Yongchao Huang, Weitao Qiu, Hao Yang, Hongbing Ji, et al. -
Ether gas-sensor based on Au nanoparticles-decorated ZnO microstructures
Abstract An ether gas-sensor was fabricated based on gold nanoparticles (Au-NPs) decorated zinc oxide microstructures (ZnO-MS). Scanning electron microscope (SEM) and high-resolution transmission electron microscope (HRTEM) measurements were...
2017 / Roberto López, Enrique Vigueras-Santiago, Alfredo Rafael Vilchis-Nestor, Victor Hugo Castrejón-Sánchez, Marco A. Camacho-López, et al. -
Failure of 321 stainless steel heater tube in heavy crude oil
Abstract Failure investigation was done on a 321 stainless steel charge heater tube which failed in a refinery unit processing heavy crude oil. Crude oil was the charge in the radiant and convection sections; while saturated stripping steam is...
2017 / H.M. Shalaby, K. Ravindranath, N. Tanoli, B. Al-Wakaa -
Process and Techno-economic Analysis of Bio-jet Fuel-range Hydrocarbon Production from Lignocellulosic Biomass Via Aqueous Phase Deconstruction and Catalytic Conversion
Abstract The integrated 1000 tonne/a-scale bio-jet fuel-range hydrocarbon (C8-C15) synthesis system via aqueous phase deconstruction and catalytic conversion process was analyzed for its techno-economics of biomass residue utilization. The operation ...
2017 / Yuping Li, Lungang Chen, Xinghua Zhang, Qi Zhang, Tiejun Wang, et al. -
Dynamic Modeling of CO 2 Transcritical Power Cycle for Waste Heat Recovery of Gasoline Engines
Abstract Waste heat recovery by means of a CO2 transcritical power cycle (CTPC) is capable of dealing with high-temperature heat sources and achieving miniaturization, which has become attractive in thermal management of engines. In current work, a...
2017 / Xiaoya Li, Gequn Shu, Hua Tian, Lingfeng Shi, Xuan Wang -
Manufacturing Task Description for Robotic Welding and Automatic Feature Recognition on Product CAD Models
Abstract In this paper, a novel approach for an ontological representation of continuous-path manufacturing tasks is presented on the example of robotic fillet welding. The representation specifies manufacturing information and product related...
2017 / Alexander Kuss, Thomas Dietz, Konstantin Ksensow, Alexander Verl -
Component Mode Synthesis Approach for Micro End Mill Dynamics Considering Machine Tool Compliance
Abstract Chatter in machining can be avoided by machining at stable process parameters obtained from the stability lobe diagram. The accuracy of the stability lobe diagram depends on the accurate determination of micro-endmill dynamics. It is not...
2017 / Kundan K. Singh, V. Kartik, Ramesh Singh -
Strain-induced reactivation of corrosion pits in austenitic stainless steel
Abstract The reactivation of a corrosion pit under the synergetic effect of strain and electro-chemical polarisation has been observed in a type 304L stainless steel using X-ray computed tomography. The pit reactivation process was associated with...
2017 / F.A. Almuaili, S.A. McDonald, P.J. Withers, A.B. Cook, D.L. Engelberg -
Gradient crystalline structure induced by ultrasonic impacting and rolling and its effect on fatigue behavior of TC11 titanium alloy
Abstract Gradient crystalline structure in surface layer of TC11 titanium alloy was obtained through ultrasonic impacting and rolling process. Microstructure, work hardening state, residual stress distribution, and surface roughness in modified...
2017 / Xiaohui Zhao, Guilian Xue, Yu Liu -
An experimental investigation to assess the potential of using MgSO 4 impregnation and Mg 2+ ion exchange to enhance the performance of 13X molecular sieves for interseasonal domestic thermochemical energy storage
Abstract The need to develop renewable heat sources for domestic space heating is a well known problem, for solar thermal systems mismatch between generation and load is a major issue, and thermochemical interseasonal heat storage offers a solution...
2017 / Daniel Mahon, Gianfranco Claudio, Philip C. Eames -
Thermographic investigation of surface temperature of the evaporating liquid layer under the action of gas flow2016 / Aleksei Kreta, Yuriy Lyulin
-
The Tragedy of the Unexamined Cat: Why K–12 and University Education Are Still in the Dark Ages and How Citizen Science Allows for a Renaissance2016 / Robert R. Dunn, Caren B. Cooper, Darlene Cavelier, Julie Urban