Materials engineering topic list of research papers
-
Wafer-Level Fabrication and Gas Sensing Properties of miniaturized gas sensors based on Inductively Coupled Plasma Deposited Tin Oxide Nanorods
Abstract SnO2 nanorods were successfully deposited on 3” Si/SiO2 wafers by inductively coupled plasma-enhanced chemical vapor deposition (PECVD) and a wafer-level patterning of nanorods layer for miniaturized solid state gas sensor fabrication were...
2009 / A. Forleo, L. Francioso, S. Capone, F. Casino, P. Siciliano, et al. -
Selective modified SnO2-based materials for gas sensors arrays
Abstract An enhancement of selectivity of semiconductor gas sensors, based on nanocrystalline SnO2 is reported. It is shown that modification of the surface of crystallites, forming thick films of conductive sensor materials, with catalytic clusters ...
2009 / V. Krivetsky, A. Ponzoni, E. Comini, M. Rumyantseva, A. Gaskov -
Fourth Workshop on Teaching Computational Science (WTCS 2010)
Abstract The Workshop on Teaching Computational Science (WTCS), taking place within the International Conference on Computational Science (ICCS), is a platform for discussing innovations in teaching computational science in its various aspects, e.g. ...
2010 / A. Tirado-Ramos, A.B. Shiflet -
Leaching Experiments on Aquifer Rocks of the Aquitaine Basin (France): Uranium Concentrations and Activity Ratios, Preliminary Results.
Abstract Long-term leaching experiments were done using aquifer rocks of the Aquitaine Basin, ranging in age from Santonian to upper Eocene. Leachates were sampled after one hour, one day, one week, and one month, and were analyzed for U...
2013 / Christophe Innocent, Eline Malcuit, Philippe Négrel, Emmanuelle Petelet-Giraud -
Fiber Bragg Grating Sensors for Harsh Environments2012 / Stephen J. Mihailov
-
Ab initio study of the structural and electronic properties of Nb2AlC
Abstract The structural and electronic properties of Nb2AlC have been studied using the ab initio pseudopotential approach based on density functional theory. The internal coordinates of Nb atom is determined to be (1/3, 2/3, 0.089). The equilibrium ...
2016 / Ai-Jiao Xu, Wen-Wu Zhong, Xin Zhang -
Controlled growth off ZnPc thin filmss for phootovoltaic appplications
Abstract The growth of ultra-high-vacuum evaporated ZnPc films was discussed in detail. The effects of growth rate and substrate temperature on the film morphology are investigated by atomic force microscopy. It is clear that growth conditions play...
2011 / Ying Zhou, Tetsuya Taima, Yosei Shibata, Tetsuhiko Miyadera, Toshihiro Yamanari, et al. -
Laser Additive Manufacturing of Modified Implant Surfaces with Osseointegrative Characteristics
Abstract Additive Manufacturing technology, such as Selective Laser Melting, allows fabrication of complex metal parts with freeform surfaces. Using biocompatible metal alloys, e.g. TiAl6V4, medical implants can be produced. To increase...
2011 / C. Emmelmann, P. Scheinemann, M. Munsch, V. Seyda -
μSR Study of Charge Carrier Diffusion in Regioregular Poly(3-Butylthiophene-2,5-Diyl)
Abstract Temperature-dependent of charge carrier diffusion in regioregular-poly(3-butylthiophene-2,5-diyl) (RR-P3BT) has been studied by Longitudinal Field (LF) muon-spin-relaxation (μSR) method for determining intrachain and interchain charge...
2012 / Risdiana, B. Adiperdana, L. Safriani, A. Bahtiar, Fitrilawati, et al. -
Graphene Grown on Sapphire Surface by Using SiC Buffer Layer with SSMBE
Abstract Graphene layer is successfully grown on insulated sapphire substrate through depositing a SiC buffer layer and annealing at high temperature with solid source molecular beam epitaxy (SSMBE). The structural properties of the epitaxial...
2012 / J. Tang, C.Y. Kang, L.M. Li, H.B. Pan, W.S. Yan, et al. -
Application of AVO Inversion to the Forecast of Coalbed Methane Area
Abstract Based on the different elastic parameters and AVO attributes of the different types of coal, seismic attributes can be inversed and geological basis for the delineation of coal bed methane enriched area can be provided by the appropriate...
2011 / Yuan Wang, Ruofei Cui, Shaoqing Zhang, Fangyao Dai, Wenhui Jia -
Network relationship analysis of urban energy metabolic system
Abstract Analysis of the function of urban energy metabolic system is an important research subject under the policy of energy saving. We developed an ecological network model for the system, and used Beijing city as an example of how this approach...
2010 / Yan Zhang, Jinyun Zhang, Zhifeng Yang -
Research on Three Resistant Plants Remediating Atropine Contaminated Soil
Abstract This article examines the preliminary laboratory research on remediate atrazine contaminated soil and explores the degradation effect of resistant plants on atrazine contaminated soil, using sorghum hybird sudangrass, ryegrass and...
2012 / Yuexuan Ma, Ying Zhang, Juan Du, Qingyuan Zhang, Shijie Ge -
Determination of Electro Discharge Machining Parameters in AISI202 Stainless Steel Using Grey Relational Analysis
Abstract Unconventional machining processes are used only when no other traditional machining process can meet the necessary requirements efficiently and economically. Determinations of machining parameters are essential for the effective...
2012 / T. M. Chenthil Jegan, M. Dev Anand, D. Ravindran -
Fuzzy-PID Controller for Semi-Active Vibration Control Using Magnetorheological Fluid Damper
Abstract Magnetorheological (MR) dampers are considered as excellent prospect to the vibration control in automotive engineering. To overcome the effect from road disturbances many control algorithms have been developed and opted to control the...
2012 / Banna Kasemi, Asan G.A. Muthalif, M. Mahbubur Rashid, Sharmila Fathima -
Bio-Inspired Approach for Energy Utilization in Wireless Sensor Networks
Abstract A wireless sensor network is a system of spatially distributed sensor nodes to collect important information about the target environment. A major challenge in wireless sensor network is it operates in an unattended environment, with...
2012 / M.A. Bharathi, M. Mallikarjuna, B.P. VijayaKumar -
Techniques for Processing Metal Matrix Composite; A Survey
Abstract In this paper the recent progress in the art of processing of metal matrix composite is reviewed. The discussion is based on manufacturing technologies involved, current and future products for advanced metal matrix and comparison of metal...
2012 / R. Anish, G.Robert Singh, M. Sivapragash -
Development of a three-load component instrumented stem for road cycling
Abstract The aim of this research was to develop an instrumented road bike stem to enable in situ measurements of static and dynamic loads transmitted through the stem-handlebar connection. Our stem is instrumented with twelve strain gauges and...
2012 / Jean-Marc Drouet, Yvan Champoux -
The Use of the Multi-Functional Heat Generating Unit-Homogenizer in Food Processing Industry
Abstract In the article the authors discuss the possibility of using a rotor-dynamic homogenizers to improve technology for processing milk by the intensification of the process of homogenization. They give an informative overview of design patterns ...
2012 / A.A. Papchenko, S.F. Kovalev, M.S. Ovcharenko -
Mathematical Modeling, Equivalent Circuit Analysis and Genetic Algorithm Optimization of an N-sided Regular Polygon Split Ring Resonator (NRPSRR)
Abstract In this paper, a mathematical model is proposed to estimate the resonant frequency of a N-sided Regular Polygon Split Ring Resonator (NRPSRR), which is extended to the Circular Split Ring Resonator (CSRR) for N tending to infinity. The...
2012 / Sumanta Bose, M. Ramaraj, S. Raghavan, Swadhyaya Kumar