Materials engineering topic list of research papers
-
Developing and Research on Pulse Motion Controller Based on SCM
Abstract As being the core of the machinery and electronic, motion controller is used in industry production widely. In this paper, a motor motion controller based on 16 bits SCM (Single Chip Microcomputer) is designed. Combining peripheral timers,...
2011 / Ruili Chang, Jun Han -
Particle Formation of Lecithin Process with Particles from Gas-Saturated Solutions using Supercritical Carbon Dioxide
Abstract The particles from gas-saturated solutions process was performed to micronize lecithin isolated by ethanol from deoiled mackerel by Supercritical Carbon Dioxide (SC-CO2). The particle formation of lecithin with biodegradable polymer,...
2012 / Jun-Ho Yun, Seung-Mi Lee, Jung-Nam Park, Byung-Soo Chun -
EU-CargoXpress: Wind Propulsion Concept
Abstract The EU-CargoXpress project suggests the usage of sustainable energies to reduce the fuel consumption. The updated concept consists of hoisting the superstructure and using it as a sail together with the conventional propulsion. This paper...
2012 / Patricia Izaguirre-Alza, Luis Pérez-Rojas, Alberto Torres-Benayas, Francisco Pérez-Arribas -
Detection of O3 and NH3 using tin dioxide/carbon nanotubes based sensors: Influence of carbon nanotubes properties onto sensor s sensitivity
Abstract This study deals with the development of a hybrid SnO2/SWNTs based gas sensor for the detection of O3 and NH3. Experiments concerned the study of the correlation between the physico-chemical properties of carbon nanotubes and the sensor s...
2010 / B. Ghaddab, F. Berger, J.B. Sanchez, C. Mavon -
CAx Process Chain for Two Robots Based Incremental Sheet Metal Forming
Abstract Robot based incremental sheet metal forming, also called Roboforming, is a dieless incremental forming process. It is especially suitable for rapid prototyping and manufacture of small batch sizes with low costs. This paper introduces the...
2012 / H. Meier, J. Zhu, B. Buff, R. Laurischkat -
The Research on Shredding Models of Light Metal Scrap of End-of-life Vehicles and Household Appliances
Abstract The objective of the research is to find solutions to reuse of end-of-life vehicles and household appliances (ELV and ELHA). On the basis of the working principle of shredders, the experimental shredding installation for Light Metal Scrap...
2012 / Liu Jianxiong, Peng Juntao, Yang Bangcheng, Hou Jie -
An Integrated Scheme for Cyber-physical Building Energy Management System
Abstract Building energy management systems (BEMS) are gaining momentum as an alternative means to implement energy efficiency applications in large public buildings. A integration of Cyber-physical system and building energy management manifests an ...
2011 / Shaolin Wang, Guiqing Zhang, Bin Shen, Xiuying Xie -
Influence of the Coating Residual Stresses on the Tool Wear
Abstract The use of PVD (Physical Vapor Deposition) coatings is one of the most common methods to improve the performance of the cutting tools, reducing the wear under heavy loads and high temperatures. A key aspect to increase the tool life is the...
2011 / O. Gonzalo, O. Gonzalo, V. García Navas, B. Coto, I. Bengoetxea, et al. -
On study of steam bypass and pressure control system for Lungmen nuclear power plant
Abstract The investigation of steam bypass and pressure control system (SBPCS) is performed by RETRAN-3D code for Lungmen nuclear power plant. The purposes of this study are: 1) to demonstrate that the dynamic response of SBPCS is capable of...
2011 / Chiung-Wen Tsai, Chunkuan Shih, Jong-Rong Wang, Hao-Tzu Lin, Su-Chin Cheng, et al. -
Analytical and Experimental Determination of the Ra Surface Roughness during Turning
Abstract In this article an analytical equation for calculating the theoretical arithmetic mean surface roughness, Ra, in the case of turning using a tool with a circular nose radius is presented. The deviation that often occurs between the expected ...
2011 / J-E. Ståhl, F. Schultheiss, S. Hägglund -
Photos from SPC20092010 /
-
Characterisation and Mechanical Testing of Open Cell Al Foams Manufactured by Molten Metal Infiltration of Porous Salt Bead Preforms: Effect of Bead Size2012 / Appichart Jinnapat, Andrew Kennedy
-
How to Deploy the Moored Data Buoy with Small Vessel
Abstract With more and more data buoys are produced to study the oceans, how to deploy them in a convenient and economic way is very important. In the past, the deployment is often accomplished by large special vessel, which needs a lot of manpower...
2012 / Chen Yong-hua -
Chronology of Bioactive Glass Development and Clinical Applications2013 / Larry L. Hench
-
A Density Functional Theory Study on the Armchair (2,2) B-C-N Nanotubes with PBC Models
Abstract The ultra long tube models of single walled armchair (2,2) B-C-N nanotubes with different ratios of B, C and N atoms were studied with density functional theory of B3LYP/3-21G* and the periodic boundary conditions. The (2,2) B-C-N nanotubes ...
2013 / Yanli Wang, Kehe Su, Ying Huang -
Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys
Abstract The three-dimensional (3-D) architecture of rigid multiphase networks present in AlSi10Cu5Ni1 and AlSi10Cu5Ni2 piston alloys in as-cast condition and after 4h spheroidization treatment is characterized by synchrotron tomography in terms of...
2011 / Z. Asghar, G. Requena, E. Boller -
Energy-based numerical models for assessment of soil liquefaction
Abstract This study presents promising variants of genetic programming (GP), namely linear genetic programming (LGP) and multi expression programming (MEP) to evaluate the liquefaction resistance of sandy soils. Generalized LGP and MEP-based...
2011 / Amir Hossein Alavi, Amir Hossein Gandomi -
Real parameter optimization by an effective differential evolution algorithm
Abstract This paper introduces an Effective Differential Evolution (EDE) algorithm for solving real parameter optimization problems over continuous domain. The proposed algorithm proposes a new mutation rule based on the best and the worst...
2013 / Ali Wagdy Mohamed, Hegazy Zaher Sabry, Tareq Abd-Elaziz -
Novel flexible broadband microwave absorptive fabrics coated with graphite nanosheets/polyurethane nanocomposites
Abstract Graphite nanosheets (GNS) were prepared by surfactant assisted ultrasonication from expanded graphite (EG) and followed by coating onto vinylon fabrics with water-borne polyurethane (WPU). The morphology of GNS and GNS/polyurethane (PU)...
2012 / Miao-miao Yu, Shao-hua Chen, Zhe Zhou, Mei-fang Zhu -
Effects of pre-training injection of orexin A into dorsal raphe nucleus in passive avoidance acquisition on male rats
Abstract Endogenous orexins, especially orexin A, play an important role in spatial learning and memory. A recent study has shown the effect of orexinergic system in hippocampus on avoidance learning. Orexinergic receptors are distributed in dorsal...
2012 / Arghavan Shafiee Aghdam, Ensiyeh Piri, Abdolrahman Sarihi, Alireza Komaki, Siamak Shahidi, et al.