Materials engineering topic list of research papers
-
SEU Tolerance Design And Implementation of A Space High Reliability Microprocessor
Abstract This paper focuses on study of a space high reliability microprocessor which is designed for space platforms, such as on-board computer systems. Space radiation environment is a special factor that should be considered when we design space...
2011 / Bao Bin, Wan Min, Wang YunLong -
2D Cantilever Array with Fixed Geometries and Varying Spring Constants for Life Science Applications
Abstract We present 2D cantilever arrays for parallel AFM and their fabrication process using a silicon nitride cantilever with molded tip as the base element of the array. They are designed either for (i) force indentation onto living cells and...
2012 / Frédéric Loizeau, Terunobu Akiyama, Sebastian Gautsch, André Meister, Peter Vettiger, et al. -
Measurements of electromechanical properties of electrostrictive polymer actuators
Abstract The electrostrictive input to the deformation of an actuator containing electrostrictive PVDF-TrFE-CFE polymer films was analyzed in view of actuator design optimization. For separating the contribution to actuation from electrostatic and...
2012 / Christian Schirrmann, Florenta Costache -
Development of Novel LOVE Wave Biosensor for Simultaneous Detection of Multi-Analyte
Abstract In this paper, a novel 208MHz LOVE wave biosensor with one reference element and three sensing elements was developed in a single sensor. PMMA was chosen for the waveguide layer because it can be easily produced using a spin-coating...
2012 / Haekwan Oh, Yeolho Lee, Soosuk Lee, Sang Sik Yang, Keekeun Lee -
Novel Printed Nanostructured Gas Sensors
Abstract There is a need for low-cost mass-production circuits on various substrates, possibly performing some simple functions as switches, antennas, displays, and sensors. Also in the field of gas sensors widely used in several applications there...
2012 / J. Kukkola, E. Jansson, A. Popov, J. Lappalainen, J. Mäklin, et al. -
Particle Swarm Optimization Algorithm Based on Semantic Relations and Its Engineering Applications
Abstract Particle swarm optimization algorithm (PSO) is a good method to solve complex multi-stage decision problems. But this algorithm is easy to fall into the local minimum points and has slow convergence speed, According to the semantic...
2012 / Liangshan Shao, Yuan Bai, Yunfei Qiu, Zhanwei Du -
Distributions of electric parameters in MOS structures on 3C-SiC substrate2012 / Krzysztof Piskorski, Henryk Przewlocki, Romain Esteve, Mietek Bakowski
-
Conservation-based prediction of the transcription regulatory region of the SCN1A gene
Abstract A challenge in identifying the transcription regulatory region is that the locations of eukaryotic transcriptional elements are often diverse among different genes. SCN1A, a disease-related sodium channel gene, has a complex 5′-untranslated ...
2009 / Yue-Sheng Long, Yi-Wu Shi, Wei-Ping Liao -
Hybrid particle swarm cooperative optimization algorithm and its application to MBC in alumina production
Abstract An effective hybrid particle swarm cooperative optimization (HPSCO) algorithm combining simulated annealing method and simplex method is proposed. The main idea is to divide particle swarm into several sub-groups and achieve optimization...
2008 / Shengli Song, Li Kong, Yong Gan, Rijian Su -
Phylogenetic relationship and morphological evolution in the subfamily Limenitidinae (Lepidoptera: Nymphalidae)
Abstract The mitochondrial cytochrome oxidase subunit I (COI) gene and the nuclear elongation factor 1α (EF-1α) gene were sequenced from 29 species of Nymphalidae (Nymphalidae, Lepidoptera). Phylogenetic trees were constructed based on the sequences ...
2008 / Min Zhang, Yang Zhong, Tianwen Cao, Yupeng Geng, Yuan Zhang, et al. -
Prognostic Health Management of a RF Transceiver Chain
Abstract The impact that modern wireless communications plays in our everyday lives is huge. A great deal of our day to day operation, be it commercial, civil or defence relies on the ability to deploy these technologies reliably, with the minimum...
2013 / A.J. Wileman, S. Perinpanayagam -
Content-based similarity for 3D model retrieval and classification
Abstract With the rapid development of 3D digital shape information, content-based 3D model retrieval and classification has become an important research area. This paper presents a novel 3D model retrieval and classification algorithm. For feature...
2009 / Ke Lü, Ning He, Jian Xue -
Simulating a perpendicular exchange-biased structure with a partially covering nonmagnetic insertion at the FM/AFM interface2006 / Tomasz Błlachowicz
-
Computer Aided Design of RC Structures2013 / S. M. Shahidul Islam, A. Khennane
-
Reliability-based optimization of maintenance scheduling of mechanical components under fatigue
Abstract This study presents the optimization of the maintenance scheduling of mechanical components under fatigue loading. The cracks of damaged structures may be detected during non-destructive inspection and subsequently repaired. Fatigue crack...
2012 / P. Beaurepaire, M.A. Valdebenito, G.I. Schuëller, H.A. Jensen -
Conjugated polyelectrolytes: A new class of semiconducting material for organic electronic devices
Abstract This feature article presents a short review of the recent developments in the synthesis of conjugated polyelectrolytes (CPEs) along with their applications in organic optoelectronic devices with particular focus on the molecular structures ...
2013 / Wonho Lee, Jung Hwa Seo, Han Young Woo -
Study on properties of Aluminum film deposited on GFRP by cathodic arc technology
Abstract Aluminum film deposited on GFRP, in this paper by cathodic arc technology for decreasing the reflect wastage. The aluminum film have been characterized by pull test, Dektak 8 Stylus Profilometer, SEM, XPS, XRD and Z-82 standard four probe....
2011 / Dong-Cai Zhao, Geng-Jie Xiao, Zhan-Ji Ma, Sheng-Hu Wu, Ni Ren -
Influence of TFT-LCD Pixels Structure on Holographic Encoding
Abstract The LCD is proposed as a new hologram loader with the advantage that the hologram image is controlled digitally with no any mechanical moving and rotating elements. Different hologram image can be readily introduced by changing the coded...
2011 / Wang Hongjun, Tian Ailing, Liu Bingcai, Wang Chunhui -
Research of Energy Substitution Strategy of China
Abstract For a long time, China's energy endowment structure determines the production structure and consumption structure of energy are coal-based.This situation is difficult to change for quite a long time. With the rapid economic growth,...
2012 / Lifeng Zhang, Chen kai -
Study on Downproofness of Down Home Textile Fabrics
Abstract In order to study the downproofness of down home textile fabrics, there are 10 kinds of fabrics which belong to A and B two series were woven. They were interwoven with different yarns e.g. cotton and DTY. Air permeability and downproofness ...
2012 / Hongxia Zhang, Xianxian Wu, Chengyan Zhu, Yongming Ming, Jianwei Bi