Materials engineering topic list of research papers
-
How to Attain an Ultralow Interfacial Tension and a Three-Phase Behavior with a Surfactant Formulation for Enhanced Oil Recovery: A Review. Part 2. Performance Improvement Trends from Winsor’s Premise to Currently Proposed Inter- and Intra-Molecular Mixtures2013 / Jean-Louis Salager, Ana M. Forgiarini, Laura Márquez, Lisbeth Manchego, Johnny Bullón
-
Advances in Ultra Short Pulse Laser based Parallel Processing using a Spatial Light Modulator
Abstract Presented here are latest advances in ultra short pulse laser based parallel processing using a spatial light modulator (SLM), which has the potential for use in high throughput precision patterning of photovoltaic and other device layers....
2012 / G. Dearden, Z. Kuang, D. Liu, W. Perrie, S.P. Edwardson, et al. -
Dynamic Analysis of Floating Wind Turbines During Pitch Actuator Fault, Grid Loss, and Shutdown
Abstract Coupled non-linear aero-hydro-servo-elastic simulations of three types of floating wind turbines (spar, semi- submersible, and tension leg platform) are carried out for several fault cases over a range of environmental conditions based on...
2013 / Erin E. Bachynski, Mahmoud Etemaddar, Marit I. Kvittem, Chenyu Luan, Torgeir Moan -
Structure Properties of As-synthesized Cu-doped ZnO Nanopowder Synthesized by Co-precipitation Method
Abstract pure ZnO and Cu - doped ZnO nanopowders (1, 2, 3, 4 and 5 wt% Cu) were synthesized by co- precipitation method without further post-heat treatment. The as-synthesized powders were characterized by X-ray diffraction (XRD), scanning electron...
2013 / Napaporn Thaweesaeng, Sineenart Supankit, Wicharn Techidheera, Wisanu Pecharapa -
Special Issue on Organic Electronic Bio-Devices2013 / Luisa Torsi
-
A new algorithm for degree-constrained minimum spanning tree based on the reduction technique
Abstract The degree-constrained minimum spanning tree (DCMST) is an NP-hard problem in graph theory. It consists of finding a spanning tree whose vertices should not exceed some given maximum degrees and whose total edge length is minimal. In this...
2008 / Aibing Ning, Liang Ma, Xiaohua Xiong -
Influence of mesoscale topography on vortex intensity
Abstract The effect of mesoscale topography on multi-vortex self-organization is investigated numerically in this paper using a barotropic primitive equation model with topographic term. In the initial field there are one DeMaria major vortex with...
2007 / Zhexian Luo, Yun Gao -
Application of EEG multipole model in the diagnosis of Alzheimer’s disease
Abstract In order to find the electroencephalogram (EEG) characteristic parameters typical of Alzheimer’s disease (AD) and explore an effective diagnostic method, a new mobile current multipole model was proposed to simulate the AD patient’s...
2007 / Baikun Wan, Longlong Cheng, Xia Hu, Dong Ming -
Influence of aging heat treatment on microstructure and hardness of single crystal Ni3Al-base superalloy IC21
Abstract The influence of high-temperature aging heat treatment on microstructure and hardness of single crystal Ni3Al-base superalloy IC21 were investigated. The results showed that the temperature and time of aging treatment had significant effect ...
2012 / Li Wei, Zhigang Zhang, Heng Zhang, Shusuo Li, Shengkai Gong -
Microfluidics Based System for Amperometric Determination of CRP
Abstract In this paper, microfluidic based system for amperometric detection of CRP is described. The amperometric sensors were designed to operate in a microfluidic system for immunoenzymatic test (ELISA). The developed microfluidic system with...
2012 / B. Kazimierczak, A. Baraniecka, M. Dawgul, D.G. Pijanowska, W. Torbicz, et al. -
The FPGA Implementation of Color Gamut Conversion in Laser Display
Abstract Because of the laser's larger colour gamut, the images played by the laser display will be more vivid and more colourful, but the most standard signals are coding by the formats which have small gamut, so sometimes the images displayed by...
2012 / Bailin Na, Yingying Wu, Weisheng Wang -
The Fracture Morphology Analysis of Extruded AZ31 Magnesium Alloy under High Strain Rate Loading
Abstract The high strain rate deformation behavior of extruded AZ31 magnesium alloy were characterized by Split Hopkison Tension and Pressure Bar (SHPB and SHTB). The macro- and micro- fracture morphology of the alloy under high strain rate tension...
2012 / Pingli Mao, Zheng Liu, Changyi Wang, Feng Wang -
Positron annihilation study of irradiated China domestic A508-3 steels
Abstract China domestic A508-3 steels are irradiated by protons with energy of 240 keV under the damage doses of 0.26 dpa, 0.50 dpa and 1.00 dpa, respectively. The results from positron lifetime spectrum analysis and microharness test show that τ1,...
2012 / Xiangbing Liu, Rongshan Wang, Ai Ren, Xitao Wang, Yichu Wu, et al. -
A novel optical radio on fiber multi-channel by micro ring resonator system
Abstract We propose a novel system that can be used to generate the new optical radio on fiber communication continuous variable channel using a Gaussian pulse propagating within a nonlinear micro-nanoring resonator system. By using the wide range...
2012 / N. Pornsuwancharoen, K. Boonmeewised, N. Kitcharoen, B. Sansoda, P.P. Yupapin, et al. -
Naive Bayesian Classifier Based on Genetic Simulated Annealing Algorithm
Abstract Naive Bayesian classifier (NBC) is a simple and effective classifier, but in the actual application, its attribute independence assumption is not always set up. This factor affects its classification performance. Attribute reduction is an...
2011 / Liu Jie, Song Bo -
Model Generation Based on Network of Variable Conversion Relationship
Abstract In order to manage and organise the basic elements and knowledge of the model for model generation, this paper defines the basic elements as entity, attribute, variable conversion relationships and the conversion rules, takes the network of ...
2011 / Xing Ying, Zhang Hong-jun, Zhang Rui Zeng Zi-lin -
Development of Downlink Communication System for Steerable Drilling Application
Abstract In order to improve the reliability of information transmission in steering drilling system, the downlink instruction encoding and decoding based on the transmission mode of mud pressure pulses were researched. According to analyze the...
2011 / Dang Rui-rong, Yin Guang, Gao Guo-wang, Liang Lu -
Exploiting Benefits of a Periodically-Forced Nonlinear Oscillator for Energy Harvesting from Ambient Vibrations
Abstract In this paper, we present an experimental and theoretical study of a nonlinear oscillator for energy harvesting applications. The collected energy comes from ambient vibrations as external energy sources. Specifically, we consider both...
2012 / C. Trigona, N. Dumas, L. Latorre, B. Andò, S. Baglio, et al. -
A thermal accelerometer directly integrated on organic substrate
Abstract A thermal accelerometer was developed and evaluated. The presented device was fabricated directly on an organic substrate, which ensures a high level of thermal isolation, while also facilitating direct electrical communication to the...
2012 / Anastasios Petropoulos, Anastasios Moschos, Spyros Athineos, Grigoris Kaltsas -
Microfabrication of Flexible Self-Repairing Ground Reaction Sensor With Liquid Metal Electrodes
Abstract In this paper we present a new technique that produces reliable flexible sensors using self-repairing interconnects. Instead of using conventional serpentine metal film interconnects, the flex sensor uses liquid GaInSn-filled microfluidic...
2012 / Rajesh Surapaneni, Yan Xie, Kyungjin Park, Carlos Mastrangelo