Materials engineering topic list of research papers
-
A Perspective of Energy Codes and Regulations for the Buildings of the Future2016 / Michael Rosenberg, Duane Jonlin, Steven Nadel
-
‘ Collinsella phocaeensis ’ sp. nov., ‘ Clostridium merdae ’ sp. nov., ‘ Sutterella massiliensis ’ sp. nov., ‘ Sutturella timonensis ’ sp. nov., ‘ Enorma phocaeensis ’ sp. nov., ‘ Mailhella massiliensis ’ gen. nov., sp. nov., ‘ Mordavella massiliensis ’ gen. nov., sp. nov. and ‘ Massiliprevotella massiliensis ’ gen. nov., sp. nov., 9 new species isolated from fresh stool samples of healthy French patients
Abstract Here we report of summary of the characteristics of ‘Collinsella phocaeensis’ strain Marseille-P3245T sp. nov., ‘Clostridium merdae’ strain Marseille-P2953T, ‘Sutterella massiliensis’ strain Marseille-P2435T sp. nov., ‘Sutturella...
2017 / S. Ndongo, F. Cadoret, G. Dubourg, J. Delerce, P.-E. Fournier, et al. -
Nanoparticle Electrical Analysis and Detection with a Solid-state Nanopore in a Microfluidic Device
Abstract Our society is increasingly exposed to harmful nano and nanobio particles as new viruses, harmful proteins (like prions) and metal- lic nanoparticles that need to be better detected and identified. Solid-state nanopores are rapidly growing...
2017 / Jean Roman, Olivier Français, Nathalie Jarroux, Gilles Patriarche, Juan Pelta, et al. -
Irradiation effects of hydrogen and helium plasma on different grade tungsten materials
Abstract Fine-grain tungsten alloys could be one of the solutions for the plasma facing materials of future DEMO reactors. In order to evaluate the service performances of the newly developed W alloys under edge plasma irradiation and the synergetic ...
2017 / X. Liu, Y.Y. Lian, H. Greuner, B. Boeswirth, Y.Z. Jin, et al. -
Structural Protective Design with Innovative Concrete Material and Retrofitting Technology
Abstract Retrofitting technology and high performance construction material are now widely investigated so as to increase structural ductility and robustness under extreme loading conditions. In the present study, some recent developments in...
2017 / Chengqing Wu, Jun Li -
Characteristic Times of Acoustic and Condensation Instability in Heat-releasing Gas Media
Abstract We investigate wave evolution in gas media with non-adiabatic heating and cooling processes depending on temperature and density. In this work, the temporal instability of acoustic disturbances in a heat-releasing uniform gas medium is...
2017 / D.S. Ryashchikov, N.E. Molevich, D.I. Zavershinskii -
Analytical and Numerical Model of Laser Welding Phenomena with the Initial Preheating
Abstract The paper presents the analysis of stress state in flat elements of welded dual-beam laser. One of them (lower power) is used as a source of preheating, the second (main) as a source of welding. The temperature field is determined using the ...
2017 / Wiesława Piekarska, Dorota Goszczyńska-Króliszewska, Tomasz Domański, Adam Bokota -
AMR Yokeless Current Sensor with Improved Accuracy
Abstract We analyse the influence of real parameters of KMZ51 magnetic sensors on the accuracy and characteristic of AMR current measurement sensor. The device consists of a circular array of eight magnetic field sensors. The differences in...
2017 / Pavel Mlejnek, Pavel Ripka -
Semi-automatic Inspection Tool of Pavement Condition from Three-dimensional Profile Scans
Abstract In the present work the preliminary study on qualitative and quantitative assessment of the road surface condition is presented. The work is motivated by a very actual and important problem of visual inspection of the road network. In...
2017 / Tomasz Garbowski, Tomasz Gajewski -
Substrate Transfer Technology for Stretchable Electronics
Abstract This paper focuses on the implementation of a new technique for the fabrication of stretchable electronic patches that can be used for medical applications. The technique is based on the Electronics on Plastics by Laser Release (EPlaR)...
2017 / S. Joshi, A. Savov, R. Dekker -
Application of Local Backside Contacts for Structuring of Silicon with Anodization: Simulation and Experiments
Abstract Anodization of silicon can be used as a structuring process with adjustable anisotropy by control of charge flow through the silicon substrate with local electrodes placed on the substrate. In this work, for the first time the secondary...
2017 / A. Ivanov, A. Kovacs, U. Mescheder -
Control of a Hydrogel-based Thermal Actuator in Closed-loop Configuration
Abstract A closed-loop hydrogel-based thermal actuator is designed, simulated and tested for improving the transient response. A system model of such a closed-loop actuator is implemented in Matlab/Simulink, where the Voigt-Kelvin model is utilized...
2017 / Kangfa Deng, Guorui Mu, Margarita Guenther, Gerald Gerlach -
A CMOS Smart Temperature Sensor with One Homogeneous Delay Line and Curvature Compensation
Abstract A CMOS time-domain smart temperature sensor with one homogeneous delay line and curvature compensation is presented for accuracy improvement. For temperature sensing, a temperature-sensing delay line was used to generate a thermal pulse...
2017 / Chun-Chi Chen, Zong-Yi Guo -
An oxide-based thermoelectric generator: Transversal thermoelectric strip-device2015 / S. Teichert, A. Bochmann, T. Reimann, T. Schulz, C. Dreßler, et al.
-
Compositions and chemical states on the co-deposition layer of lithiated tungsten of plasma-facing components of EAST
Abstract Lithiation is beneficial to enhance plasma performance in EAST by reducing hydrogen and impurities recycling via lithium (Li) wall conditioning. High-Z materials like tungsten (W) have been selected as up–divertor in EAST tokamak. However,...
2017 / Cong Li, Yong Wang, Xingwei Wu, Hongyue Li, Jiansheng Hu, et al. -
Low Velocity Impact Performance of Delaminated Composite Stiffened Shell
Abstract Finite element method is presented to study the low velocity impact response of delaminated composite stiffened shell. An eight noded isoparametric shell element based on first order shear deformation theory along with a three noded...
2017 / Mrutyunjay Rout, Amit Karmakar -
Investigation of Lubricated Die/Billet Interface in Hydrostatic Extrusion Process Using Upper Bound Theorem
Abstract The objective of this paper is to investigate numerically the existence of thermal minimum film thickness at the die-billet interface in the inlet in the hydrostatic extrusion of aluminum alloy by incorporating the viscous heat dissipation...
2017 / Pankaj Tomar -
Propagation of Love Wave in Viscoelastic Sandy Medium Lying Over Pre-stressed Orthotropic Half-space
Abstract The main objective of the study is to investigate the effects of parameters on wave propagation in a viscoelastic sandy medium lying over an elastic orthotropic half-space under initial stress. The frequency equation for Love waves has been ...
2017 / Deepak Kr. Pandit, Santimoy Kundu -
Severely deformed copper by equal channel angular pressing
Abstract Mechanical and microstructural analysis of equal channel angular pressed copper was experimentally investigated. The results showed that the hardness distribution uniformity was rapidly decreased after the first pass and gradually improved...
2017 / M. Ebrahimi, C. Gode -
The Design of JMP/SAP Based Six Sigma Management System and its Application in SMED
Abstract Nowadays, while the product variety is increasing quickly in large-scale production enterprises, production lines begin to face with the problem of waste of time which caused by frequent exchange of die. In order to decrease different kinds ...
2017 / Siyu Chen, Shuhai Fan, Jiawei Xiong, Wenqian Zhang